Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NAND GATE; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
$0.293
Lifecycle Status
Suppliers In-Stock
58
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.270
Rochester
$0.317
$0.263
$0.235
Verical
Nova Conductors
$0.197
Freelance Electronics
$0.216
Digiode
$0.247
Bristol Electronics
$0.750
$0.300
$0.210
Component Electronics Inc.
$0.770
$0.580
$0.500
Forefront Electronics and Design
$1.470
Vyrian
DigiKey Marketplace
Prism Electronics
Electronic Expediters
LWI Electronics Inc
ComSIT Distribution GmbH
VNN
Corel Iberica Componentes, S.L.
Sunrise Surplus Inc.
Anansix
Extreme Components
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Resion
ECAB
Electronics Depot
Mentor Electronics Marketing, LLC
R&J Components
M&R Communications
Inland Empire Components Inc.
Fibra_Brandt Electronic GMBH
Pegasus Components GmbH
North Shore Components
Mil-Aero Solutions, Inc.
Connector Distribution Corp
Right Parts Inc.
Legend Electronics Inc.
Q Components
A&K Electronics
Rotakorn
Kronex Distribution GmbH
EMSNET
Sogenti Electronics
Whistler Technology
MRC Electronics
Holdelec - ElecDif-Pro
Component Sense
$1.190
LIBRA Elektronik GmbH
J2 Sourcing AB
PC Components Company LLC
J & M Industries LLC
PAR Electronics
Elcom Components
Semtec, LLC
Lantek
Sea View Technologies
Sinequanon
LittleDiode
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Aranea Global
$0.193
$0.185
Continental Prestige Electronics
Argo Parts USA
$0.191
Corohmni
Corphita
$0.234
Aztec Data Supply Inc.
$22.701
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
Microchip USA
SupplyDigital Components
Kulean Microsystems
Infinite Electronics LLP (Excess)
Assy Fe
Perfect Parts
Glotronic Ltd.
Supply Digital
Problanco Electronics
UHIMA Technologies
Cyclops Electronics Ltd (Excess)
GreenTree Electronics
Logic Gates 74ACT00PC attributes and parameters. Explore more Logic Gates devices from National Semiconductor
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum I (ol):
No. of Functions:
No. of Inputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Schmitt Trigger:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
74ACT00PC Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-360-8823, 5962013608823
NIIN
013608823
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Yangzhou Yangjie Electronics
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SN74HC14DG4
SN74HC14DG4 by Texas Instruments is a CMOS logic gate with 6 functions, operating at a supply voltage range of 2-6V. It features a propagation delay of 31ns and Schmitt Trigger technology, suitable for industrial applications requiring fast response times. With surface mount capability and small outline packaging, it offers efficient integration in electronic circuits.
SN74LVC3G14DCUR
SN74LVC3G14DCUR by Texas Instruments is a CMOS logic gate with 3 functions, featuring a propagation delay of 5.4 ns and operating voltage range of 1.65V to 5.5V. Ideal for automotive applications due to its Schmitt Trigger technology, small form factor, and low power consumption of 0.01mA at max supply voltage.
SN74LVC1G332DCKRG4
SN74LVC1G332DCKRG4 by Texas Instruments is a logic gate with 3 inputs, 4.8 ns propagation delay, and 17.2 ns tpd. It operates at a voltage range of 1.65V to 5.5V and is ideal for automotive applications due to its small outline package and low power consumption of 0.01 mA ICC.
MM74HC14MTC
MM74HC14MTC by Onsemi is a CMOS Logic Gates IC with 6 functions. It has a propagation delay of 38ns at 4.5V, suitable for industrial applications requiring Schmitt Trigger functionality and operating temperatures ranging from -40 to 85°C.
SN74LS00N
Motorola
NAND GATE; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
74HC132D,653
NXP Semiconductors' 74HC132D,653 is a CMOS Logic Gate with 4 functions and 2 inputs. It operates at a supply voltage range of 2-6V, with a propagation delay of 31ns. Ideal for automotive applications due to its Schmitt Trigger feature and small outline package style.
74LVC1G11GW,125
Nexperia
AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
SN74LVC14ADR
SN74LVC14ADR by Texas Instruments is a CMOS logic gate with 6 functions, 8 ns propagation delay, and 1.8V nominal voltage. It is used in automotive applications due to its Schmitt Trigger feature and can operate b/w -40°C to 125°C temperature range.
74LVC2G17GV,125
BUFFER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR;
SN74LVC1G02DBVR
SN74LVC1G02DBVR by Texas Instruments is a CMOS logic gate with 2 inputs, 3.3V supply voltage, and 4.5ns propagation delay. It is used in automotive applications due to its low profile package style and wide operating temperature range of -40°C to 125°C. The device features a small outline design with surface mount capability for compact circuit integration.
SN74HC00D
SN74HC00D by Texas Instruments is a CMOS logic gate with 4 functions and 2 inputs. It has a propagation delay of 23 ns at 5V, making it suitable for industrial applications requiring fast response times. With a small outline package style and surface mount capability, it is ideal for compact electronic designs.
CD74HC14M
General Electric Solid State
INVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SN74LS14N
INVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
SN74LVC1G00DCKR
SN74LVC1G00DCKR by Texas Instruments is a CMOS logic gate with 2 inputs, 4.7 ns propagation delay, and 3.3V nominal voltage. It is used in automotive applications due to its small size, low power consumption (0.01 mA), and wide operating temperature range (-40 to 125 °C).
74AHC14PW-Q100,118
INVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
SN74LVC1G07QDBVRQ1
SN74LVC1G07QDBVRQ1 by Texas Instruments is a CMOS logic gate with 4.7 ns propagation delay, suitable for automotive applications. It operates at a nominal voltage of 3.3V and has an open-drain output characteristic. This small-outline package features dual terminals and can withstand temperatures from -40 to 125°C.
NC7SZ04P5X
Fairchild Semiconductor
INVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
NAND GATE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SN74LVC1G34DBVRE4
SN74LVC1G34DBVRE4 by Texas Instruments is a CMOS logic gate with 3-STATE output, featuring a propagation delay of 9.9 ns at 3.3V supply voltage. With a load capacitance of 50 pF, it operates in temperatures ranging from -40 to 125°C and is suitable for automotive applications due to its small outline package style and low profile design.
74HCT14D-Q100,118
NXP Semiconductors' 74HCT14D-Q100,118 is a CMOS logic gate with 6 functions and Schmitt Trigger technology. It operates at a supply voltage of 5V, has a propagation delay of 51ns, and can handle load capacitance up to 50pF. This AEC-Q100 graded component is ideal for automotive applications due to its small outline package and dual terminal position.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74AC08MTC
AND GATE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
74AC08MTC by Onsemi is a logic gate with 4 functions and 2 inputs. It operates at a nominal voltage of 3.3V, with a propagation delay of 7.5ns. This CMOS technology device is ideal for industrial applications requiring fast signal processing in compact spaces.
74ACT08MTCX
74ACT08MTCX by Onsemi is a logic gate with 4 functions and 2 inputs. It has a propagation delay of 10 ns at a nominal voltage of 5V, making it suitable for industrial applications requiring fast signal processing in compact spaces. This surface-mount device features a small outline package with a thin profile and shrink pitch, ideal for designs with limited board space.
74ACT14SCX
74ACT14SCX by Onsemi is a CMOS logic gate with 6 functions and Schmitt Trigger feature. It has a propagation delay of 11ns at 5V, making it ideal for industrial applications requiring fast response times. With a small outline package style and surface mount capability, it offers high performance in compact designs.
74AC14SCX
74AC14SCX by Onsemi is a CMOS logic gate with 6 functions and a propagation delay of 15 ns at 3.3V. It operates in industrial temperature range (-40 to 85 °C) and has Schmitt Trigger technology, suitable for various digital applications requiring fast response times. The package is small outline with Gull Wing terminals, making it ideal for surface mount PCB designs.
74AC04MTC
INVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
74ACT14SC
74ACT00PC
74ACT00PC by Onsemi is a CMOS Logic Gates IC with 4 functions, 2 inputs, and 9.5ns propagation delay at 5V. It has a package style of IN-LINE and operates in industrial temperature range. Ideal for applications requiring high-speed logic operations in various electronic circuits.
74ACT00DC
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved