Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Maximum DC Resistance: .181 ohm; Rated Current: .9 A; Height: .9 mm; Length: 2.5 mm; No. of Functions: 1;
Median Price
$0.056
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
$0.054
1k+ parts
$0.051
10k+ parts
Verical
$0.057
Nova Conductors
$0.059
Chip Stock
Vyrian
Continental Prestige Electronics
$0.058
Argo Parts USA
Netroflash
AZTECH Wire
$0.790
$0.760
$0.740
$0.730
Data Line Filters NFZ2HBM8R4SN10L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Current:
Width (mm):
NFZ2HBM8R4SN10L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Secos
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
74279223560
Wuerth Elektronik & Kg
Wurth Elektronik 74279223560 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 10A current. It operates b/w -55 to 125°C, covering frequencies from 100 MHz to 1 GHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
BLM21BB121SN1D
Murata Manufacturing
Murata Manufacturing's BLM21BB121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a max frequency of 100 MHz and DC resistance of 0.19 ohm, it offers output impedance of 120 OHM. Ideal for data line filtering applications due to its compact size and ferrite material construction.
BLM21AG471SN1D
BLM21AG471SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications in electronic devices.
BLM21AG151SN1D
BLM21AG151SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to reduce noise in data lines.
SRF0905-202Y
Bourns
Bourns SRF0905-202Y is a 2-function data line filter with inductance of 2000uH and max DC resistance of 0.42 ohm. It operates b/w -40 to 105 °C, rated at 50V, and has an output impedance of 3000 OHM. Ideal for surface mount applications requiring filtering in data lines.
BLM18PG121SN1D
Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
744272332
Wurth Elektronik 744272332 is a Data Line Filter with UL approval, rated at 80V and inductance of 3300uH. It has 2 functions, operates b/w -40 to 125°C, and offers 0.36 ohm DC resistance. Ideal for applications requiring high output impedance of 8900 OHM in a compact L10.0xB8.7xH6.5 mm size for surface mount installation.
BLM18BD252SN1D
Murata's BLM18BD252SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 1.5 ohm and output impedance of 2500 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM15AG601SN1D
Murata Manufacturing's BLM15AG601SN1D is a 0402 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.52 ohm, and output impedance of 600 ohm. Ideal for data line filtering applications due to its compact size (L1.0xB0.5xH0.5 mm) and rated current of 0.3 A.
NFM21CC223R1H3D
Murata Manufacturing's NFM21CC223R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a feed-through capacitor suitable for applications requiring filtering in temperatures ranging from -55 to 125 °C.
PBY201209T-600Y-N
Chilisin Electronics
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A; Output Impedance (ohm): 60 OHM;
NFM18CC101R1C3D
Murata Manufacturing's NFM18CC101R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 100uF capacitance. Ideal for applications requiring FEED THROUGH CAPACITOR filters in surface mount configurations.
DSS9NC51H223Q55B
Murata Manufacturing's DSS9NC51H223Q55B is a 50V rated data line filter with 7A current capacity. With dimensions of L12xB7.5xH10.5 (mm), it operates b/w -25°C to 85°C, making it suitable for various applications requiring noise suppression in data lines.
MMZ1608S601ATD25
TDK
TDK MMZ1608S601ATD25 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 600 ohm, it is ideal for automotive applications due to AEC-Q200 screening level compliance.
BLM21PG600SN1D
Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.
DLW5BTM142TQ2L
DLW5BTM142TQ2L by Murata is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. It has a min insulation resistance of 10 Mohm and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines.
SRF3216-222Y
Bourns SRF3216-222Y is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. Ideal for applications requiring high output impedance and low DC resistance in compact surface mount designs.
BLM18AG601SN1B
Murata's BLM18AG601SN1B is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.38 ohm and operates b/w -55°C to 125°C. This ferrite chip filter has an output impedance of 600 ohm and is rated for a current of 0.5A, making it suitable for noise suppression in circuits up to 100MHz frequency range.
BNX024H01B
Murata Manufacturing's BNX024H01B is a 50V data line filter with 100 Mohm insulation resistance. AEC-Q200 screening level ensures high quality for automotive applications. With dimensions of L12.1xB9.1xH3.5 mm, it offers 15A rated current and 50 ohm output impedance for surface mount installation.
MPZ1608S601ATA00
TDK's MPZ1608S601ATA00 is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.15 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NFZ2HBM170SN10L
FERRITE CHIP; Maximum DC Resistance: .263 ohm; Rated Current: .7 A; Minimum Operating Temperature: -55 Cel; Height: .9 mm; No. of Terminals: 2;
NFZ2HBM600SN10L
NFZ2HBM600SN10L by Murata is a 2-terminal FERRITE CHIP filter with max temp of 125°C and min temp of -55°C. It has a width of 2mm, length of 2.5mm, and output impedance of 60Ω. Ideal for surface mount applications in data lines, offering rated current of 0.4A.
NFZ2HBM1R5SN10L
FERRITE CHIP; Maximum DC Resistance: .075 ohm; Rated Current: 1.2 A; Minimum Operating Temperature: -55 Cel; Additional Features: IMPEDANCE AT 1 MHZ; Maximum Operating Temperature: 125 Cel;
NFZ2HBM330SN10L
Murata NFZ2HBM330SN10L is a Ferrite Chip Data Line Filter with 2 terminals, 33 Ohm output impedance, and 0.375 ohm max DC resistance. It operates b/w -55 to 125 °C and rated for 0.5A current. Ideal for surface mount applications in electronics to suppress noise and interference.
NFZ2HBM4R4SN10L
Murata NFZ2HBM4R4SN10L is a FERRITE CHIP filter with 2 terminals, 1.05A rated current, and 4.4 OHM output impedance. It operates b/w -55°C to 125°C, ideal for data line filtering in surface mount applications.
NFZ2HBM6R1SN10L
FERRITE CHIP; Maximum DC Resistance: .156 ohm; Rated Current: 1 A; Packing Method: TR, EMBOSSED, 7 INCH; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel;
NFZ2MSM601SN10L
FERRITE CHIP; Maximum DC Resistance: .046 ohm; Rated Current: 2.5 A; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Height: .9 mm;
NFZ2MSM301SN10L
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 3.1 A; Width (mm): 1.6; No. of Terminals: 2; Maximum Operating Temperature: 85 Cel;
NFZ2HBM110SN10L
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .8 A; No. of Functions: 1; Additional Features: IMPEDANCE AT 1 MHZ; Maximum Operating Temperature: 125 Cel;
NFZ2HBM240SN10L
FERRITE CHIP; Maximum DC Resistance: .313 ohm; Rated Current: .65 A; Mounting Type: SURFACE MOUNT; Length: 2.5 mm; Output Impedance (ohm): 24 OHM;
NFZ2HBM2R9SN10L
FERRITE CHIP; Maximum DC Resistance: .106 ohm; Rated Current: 1.1 A; Maximum Operating Temperature: 125 Cel; Height: .9 mm; Minimum Operating Temperature: -55 Cel;
NFZ2HBM110SN10B
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .8 A; Additional Features: IMPEDANCE AT 1 MHZ; Packing Method: BAG; BULK; Maximum Operating Temperature: 125 Cel;
NFZ2HBM170SN10B
FERRITE CHIP; Maximum DC Resistance: .263 ohm; Rated Current: .7 A; Height: .9 mm; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel;
NFZ2HBM1R5SN10B
FERRITE CHIP; Maximum DC Resistance: .075 ohm; Rated Current: 1.2 A; Length: 2.5 mm; Height: .9 mm; No. of Terminals: 2;
NFZ2HBM2R9SN10B
FERRITE CHIP; Maximum DC Resistance: .106 ohm; Rated Current: 1.1 A; Minimum Operating Temperature: -55 Cel; No. of Terminals: 2; No. of Functions: 1;
NFZ2HBM330SN10B
FERRITE CHIP; Maximum DC Resistance: .375 ohm; Rated Current: .5 A; Length: 2.5 mm; Width (mm): 2; No. of Terminals: 2;
NFZ2HBM4R4SN10B
FERRITE CHIP; Maximum DC Resistance: .131 ohm; Rated Current: 1.05 A; Mounting Type: SURFACE MOUNT; No. of Terminals: 2; Additional Features: IMPEDANCE AT 1 MHZ;
NFZ2HBM600SN10B
FERRITE CHIP; Maximum DC Resistance: .375 ohm; Rated Current: .4 A; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel;
NFZ2HBM8R4SN10B
FERRITE CHIP; Maximum DC Resistance: .181 ohm; Rated Current: .9 A; Additional Features: IMPEDANCE AT 1 MHZ; Packing Method: BAG; BULK; Length: 2.5 mm;
NFZ2HBM240SN10B
FERRITE CHIP; Maximum DC Resistance: .313 ohm; Rated Current: .65 A; Height: .9 mm; Packing Method: BAG; BULK; Width (mm): 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved