Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata NFZ2HBM330SN10L is a Ferrite Chip Data Line Filter with 2 terminals, 33 Ohm output impedance, and 0.375 ohm max DC resistance. It operates b/w -55 to 125 °C and rated for 0.5A current. Ideal for surface mount applications in electronics to suppress noise and interference.
Median Price
$0.225
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.220
100+ parts
$0.144
1k+ parts
$0.117
10k+ parts
-
Mouser Electronics
$0.230
$0.149
$0.121
$0.087
Nova Conductors
$0.083
Chip Stock
ComSIT Distribution GmbH
Vyrian
Continental Prestige Electronics
$0.081
Argo Parts USA
Advanced Electronics
$0.675
$0.614
$0.554
GreenTree Electronics
Authorized Procurement Solutions
Kepictronics
Netroflash
$0.079
$0.077
Two terminals provide solid connection and easy installation.
Ferrite chip design helps eliminate electromagnetic interference effectively.
High maximum operating temperature ensures durability in various environments.
Wide range of operating temperatures allows for reliable performance in extreme conditions.
Compact width makes this filter suitable for tight spaces.
Low resistance minimizes power loss and enhances efficiency.
Short length is ideal for compact applications.
Precise output impedance for optimum signal filtering.
Secure packaging ensures product protection during transportation and storage.
Surface mount design offers convenient and secure installation on PCBs.
Adequate rated current capacity for typical electronic devices.
Low profile height for space-saving integration.
Data Line Filters NFZ2HBM330SN10L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Current:
Width (mm):
NFZ2HBM330SN10L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Microchip Technology
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
SPC TECHNOLOGY/ MULTICOMP
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
ACH4518-102-TD01
TDK
TDK ACH4518-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 150 MHz. It has 1000 Mohm insulation resistance, rated for 50 V and 2 A current. Ideal for data line filtering in surface mount applications due to its compact L4.5XB1.8XH3.2 mm dimensions and -25 to 85 °C operating temperature range.
LI0402C221R-10
Laird Technologies
Laird Technologies' LI0402C221R-10 is a chip bead data line filter with 220 OHM output impedance, 0.35 ohm max DC resistance, and 25-1000 MHz frequency range. Ideal for surface mount applications in electronics to suppress electromagnetic interference (EMI) and ensure signal integrity.
ACP3225-102-2P-T000
TDK ACP3225-102-2P-T000 is a FERRITE CHIP filter with 2 functions, rated at 60V and 1.5A. With dimensions of L3.2xB2.5xH1.9 (mm), it's ideal for data line filtering applications requiring high impedance and insulation resistance up to 10 Mohm. Operating b/w -40°C to 85°C, this surface mount device offers low DC resistance of 0.1 ohm for efficient performance in various electronic systems.
742792796
Wuerth Elektronik & Kg
Wurth Elektronik 742792796 is a FERRITE CHIP data line filter with 2 terminals, rated for 0.2A current. It operates b/w -55 to 125 °C and has a max DC resistance of 1.5 ohm. Ideal for surface mount applications requiring output impedance of 1000 OHM in compact spaces.
RB8532-16-1M3
Schaffner Holding Ag
RB8532-16-1M3 by Schaffner Holding Ag is a Data Line Filter with 3 functions, rated voltage of 1000V, and inductance of 1300uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.0057 ohm. Ideal for applications requiring noise suppression in data lines.
BLM15PD121SN1D
Murata Manufacturing
BLM15PD121SN1D by Murata is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.09 ohm, and output impedance of 120 ohm. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
BLM15PX121SN1D
Murata Manufacturing's BLM15PX121SN1D is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C, DC resistance of 0.055 ohm, and output impedance of 120 ohm. Ideal for surface mount applications in electronics to suppress electromagnetic interference.
EXCCET103U
Panasonic
The Panasonic EXCCET103U is a data line filter with 25 dB attenuation at 15 MHz. It has a rated voltage of 50 V and can handle up to 2 A current. Ideal for surface mount applications, this compact filter measures L4.5xB1.8xH2.7 mm and operates b/w -40°C to 85°C temperatures.
B82789C0104N002
TDK B82789C0104N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 100uH. It operates b/w -55°C to 125°C, has matte tin over nickel finish, and dimensions of L4.5xB3.2xH3.0mm. Ideal for applications requiring filtering in data lines with a max current rating of 0.15A.
PS1720P02
TDK PS1720P02 is a data line filter with max temp of 70°C and min temp of -20°C. With diameter of 17mm, it's mounted through hole and comes in tape and reel packing. Ideal for applications requiring noise suppression in data lines.
742792097
Wuerth Elektronik & Kg 742792097 is an AEC-Q200 rated FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm at a frequency range of 70-100 MHz. Ideal for surface mounting, it offers an output impedance of 1500 OHM and can handle a rated current of 1 A efficiently.
MI0603J680R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
ACM12V-701-2PL-TL00
TDK's ACM12V-701-2PL-TL00 data line filter has 2 functions, rated at 80V and 8A. With a wide temperature range (-40 to 125°C), it is ideal for automotive applications requiring high insulation resistance (10 Mohm) and low DC resistance (0.006 ohm).
BLM18AG331SN1D
Murata Manufacturing's BLM18AG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.3Ω at a frequency range of 100MHz, suitable for surface mount applications in electronic devices requiring noise suppression on data lines.
PBY201209T-600Y-N
Yageo
Yageo's PBY201209T-600Y-N chip bead filter features 2 terminals, matte tin finish, and 60 ohm output impedance. With dimensions of L2.0XB1.25XH0.9 (mm), it is ideal for data line filtering applications at frequencies ranging from 100 MHz to DC resistance of 0.03 ohm. This surface mount component has a rated current of 3 A and is packed in tape and reel format for easy installation.
MMZ2012S601ATD25
TDK MMZ2012S601ATD25 is a chip bead data line filter with 2 terminals. It offers max operating temp of 125°C, min of -55°C, and DC resistance of 0.3 ohm. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions L2.0xB1.25XH0.85 (mm).
DLW21SN371SQ2L
Murata Manufacturing's DLW21SN371SQ2L is a data line filter with 2 functions, rated at 50V and 0.28A. It offers a min insulation resistance of 10 Mohm, operating b/w -40 to 85 °C. Ideal for applications requiring high impedance filtering in compact spaces.
MPZ2012S101ATD25
TDK's MPZ2012S101ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 4A current. With dimensions of L2.0xB1.25xH0.85 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.02 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
BLM18PG300SN1D
BLM18PG300SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1A, and output impedance of 30 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6xB0.8xH0.8 mm. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
PCMF2HDMI2SZ
Nexperia
Nexperia's PCMF2HDMI2SZ is a 5V data line filter with 2 functions and 10 terminals. It operates b/w -40°C to 85°C, with dimensions of L1.62xB1.22xH0.6 mm. Ideal for applications requiring IEC approvals, such as HDMI signal filtering in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NFZ2HBM170SN10L
FERRITE CHIP; Maximum DC Resistance: .263 ohm; Rated Current: .7 A; Minimum Operating Temperature: -55 Cel; Height: .9 mm; No. of Terminals: 2;
NFZ2HBM600SN10L
NFZ2HBM600SN10L by Murata is a 2-terminal FERRITE CHIP filter with max temp of 125°C and min temp of -55°C. It has a width of 2mm, length of 2.5mm, and output impedance of 60Ω. Ideal for surface mount applications in data lines, offering rated current of 0.4A.
NFZ2HBM8R4SN10L
FERRITE CHIP; Maximum DC Resistance: .181 ohm; Rated Current: .9 A; Height: .9 mm; Length: 2.5 mm; No. of Functions: 1;
NFZ2HBM1R5SN10L
FERRITE CHIP; Maximum DC Resistance: .075 ohm; Rated Current: 1.2 A; Minimum Operating Temperature: -55 Cel; Additional Features: IMPEDANCE AT 1 MHZ; Maximum Operating Temperature: 125 Cel;
NFZ2HBM4R4SN10L
Murata NFZ2HBM4R4SN10L is a FERRITE CHIP filter with 2 terminals, 1.05A rated current, and 4.4 OHM output impedance. It operates b/w -55°C to 125°C, ideal for data line filtering in surface mount applications.
NFZ2HBM6R1SN10L
FERRITE CHIP; Maximum DC Resistance: .156 ohm; Rated Current: 1 A; Packing Method: TR, EMBOSSED, 7 INCH; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel;
NFZ2MSM601SN10L
FERRITE CHIP; Maximum DC Resistance: .046 ohm; Rated Current: 2.5 A; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Height: .9 mm;
NFZ2MSM301SN10L
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 3.1 A; Width (mm): 1.6; No. of Terminals: 2; Maximum Operating Temperature: 85 Cel;
NFZ2HBM110SN10L
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .8 A; No. of Functions: 1; Additional Features: IMPEDANCE AT 1 MHZ; Maximum Operating Temperature: 125 Cel;
NFZ2HBM240SN10L
FERRITE CHIP; Maximum DC Resistance: .313 ohm; Rated Current: .65 A; Mounting Type: SURFACE MOUNT; Length: 2.5 mm; Output Impedance (ohm): 24 OHM;
NFZ2HBM2R9SN10L
FERRITE CHIP; Maximum DC Resistance: .106 ohm; Rated Current: 1.1 A; Maximum Operating Temperature: 125 Cel; Height: .9 mm; Minimum Operating Temperature: -55 Cel;
NFZ2HBM170SN10B
FERRITE CHIP; Maximum DC Resistance: .263 ohm; Rated Current: .7 A; Height: .9 mm; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel;
NFZ2HBM1R5SN10B
FERRITE CHIP; Maximum DC Resistance: .075 ohm; Rated Current: 1.2 A; Length: 2.5 mm; Height: .9 mm; No. of Terminals: 2;
NFZ2HBM2R9SN10B
FERRITE CHIP; Maximum DC Resistance: .106 ohm; Rated Current: 1.1 A; Minimum Operating Temperature: -55 Cel; No. of Terminals: 2; No. of Functions: 1;
NFZ2HBM330SN10B
FERRITE CHIP; Maximum DC Resistance: .375 ohm; Rated Current: .5 A; Length: 2.5 mm; Width (mm): 2; No. of Terminals: 2;
NFZ2HBM4R4SN10B
FERRITE CHIP; Maximum DC Resistance: .131 ohm; Rated Current: 1.05 A; Mounting Type: SURFACE MOUNT; No. of Terminals: 2; Additional Features: IMPEDANCE AT 1 MHZ;
NFZ2HBM600SN10B
FERRITE CHIP; Maximum DC Resistance: .375 ohm; Rated Current: .4 A; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel;
NFZ2HBM6R1SN10B
FERRITE CHIP; Maximum DC Resistance: .156 ohm; Rated Current: 1 A; Minimum Operating Temperature: -55 Cel; No. of Terminals: 2; Mounting Type: SURFACE MOUNT;
NFZ2HBM8R4SN10B
FERRITE CHIP; Maximum DC Resistance: .181 ohm; Rated Current: .9 A; Additional Features: IMPEDANCE AT 1 MHZ; Packing Method: BAG; BULK; Length: 2.5 mm;
NFZ2HBM240SN10B
FERRITE CHIP; Maximum DC Resistance: .313 ohm; Rated Current: .65 A; Height: .9 mm; Packing Method: BAG; BULK; Width (mm): 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved