Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQW15CN33NJ00D is a DATA LINE FILTER with inductance of 0.033uH and max DC resistance of 0.065ohm. With 2 terminals, it operates b/w -55 to 125°C, ideal for data line filtering applications due to its compact size (L1.0xB0.55xH0.5mm).
Median Price
$0.430
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Maritex
1+ parts
100+ parts
$0.274
1k+ parts
$0.197
10k+ parts
$0.180
Chip Stock
-
Vyrian
Prism Electronics
Nova Conductors
Corohmni
$1.846
AZTECH Wire
$17.230
Metaverse IC Inc.
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Alle Elektronik GmbH
Authorized Procurement Solutions
Argo Parts USA
GreenTree Electronics
Continental Prestige Electronics
Netroflash
Having 2 terminals makes it easy to connect to a data line filter circuit.
Being specifically designed as a data line filter ensures effective filtering of data signals.
Capable of operating at high temperatures without losing performance.
Able to operate in very cold environments without any issues.
The finish provides good conductivity and durability for reliable connections.
The inductance value helps in filtering out unwanted signals from the data line.
Compact width allows for easy integration into data line filter circuits with limited space.
Low resistance ensures minimal power loss and efficient performance.
The small length makes it suitable for applications where space is a constraint.
Taped packaging facilitates easy handling and storage of multiple filters.
Surface mount design simplifies the installation process and saves space on PCBs.
Small dimensions enable versatile mounting options in various electronic devices.
Can handle a maximum current of 1.3 A, suitable for many data line applications.
Low profile height allows for compact designs and efficient use of space.
Data Line Filters LQW15CN33NJ00D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
LQW15CN33NJ00D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
Toshiba
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Philips Components
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
744824101
Wuerth Elektronik & Kg
Wurth Elektronik 744824101 is a UL-approved data line filter with 2 functions, rated at 250V and 10A. With inductance of 1000uH, it operates b/w -40 to 125 °C, ideal for applications requiring noise suppression in data transmission systems.
LI0402C221R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .35 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
BMB2A0060LN2
TE Connectivity
TE Connectivity's BMB2A0060LN2 is a 0805 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it offers 60 OHM output impedance and operates b/w -55 to 125 °C. Ideal for surface mount applications, this compact filter measures L2XB1.2XH.9 mm and is rated for 0.85 A current, making it suitable for noise suppression in high-frequency circuits up to 100 MHz.
BLM15BD601SN1D
Murata Manufacturing
Murata's BLM15BD601SN1D is a 0402 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.65 ohm and output impedance of 600 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
MMZ1608R301ATD25
TDK
TDK MMZ1608R301ATD25 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. Ideal for applications requiring a compact surface mount solution with an output impedance of 300 ohms.
BLM18KG300TN1D
Murata Manufacturing's BLM18KG300TN1D is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has a DC resistance of 0.01 ohm and output impedance of 30 ohm.
ILHB0805ER251V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .04 ohm; Rated Current: 3 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2;
ILBB-0805ER301V
Vishay Intertechnology's ILBB-0805ER301V is a 2-terminal data line filter with FERRITE CHIP construction. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.2 ohm, suitable for surface mount applications in electronic devices requiring noise suppression up to 100 MHz frequency range.
BLM15HD102SN1D
BLM15HD102SN1D by Murata is a chip bead data line filter with 1 function, operating b/w -55 to 125°C. It has a DC resistance of 1.25 ohm, suitable for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications in electronic devices requiring impedance of 1000 ohms.
MPZ2012S601AT
The TDK MPZ2012S601AT is an 0805 chip bead data line filter with a ferrite chip construction. It has a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for applications requiring surface mount filters with dimensions of L2.0xB1.25xH0.85 (mm).
MPZ2012S102JTD25
The TDK MPZ2012S102JTD25 is a FERRITE CHIP data line filter with 2 terminals, AEC-Q200 screening. It has a max operating temp of 125°C, min of -55°C, and DC resistance of 0.15 ohm. Ideal for automotive applications due to its high output impedance of 1000 OHM and rated current of 1.5 A.
2773021447
Fair-rite Products
Fair-rite Products' 2773021447 is a FERRITE BEAD filter with 2 terminals, matte tin finish, and 70 OHM impedance. Ideal for data line filtering in surface mount applications due to its compact dimensions of L9.6XB3.05XH2.85 mm.
MPZ2012S221A
The TDK MPZ2012S221A is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, offering a DC resistance of 0.04 ohm and output impedance of 220 ohm at 100 MHz. Ideal for data line filtering applications due to its compact size and high rated current of 3 A.
MPZ1005S121CTD25
TDK's MPZ1005S121CTD25 is a FERRITE CHIP data line filter with 2 terminals. It operates b/w -55 to 125 °C, has a DC resistance of 0.09 ohm, and an output impedance of 120 OHM. Ideal for surface mount applications in electronics to reduce electromagnetic interference.
DLW43SH510XK2K
Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.
ILBB0603ER121V
Vishay Intertechnology's ILBB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, offering a max DC resistance of 0.2 ohm and output impedance of 120 OHM at 100 MHz. Ideal for surface mount applications, it measures L1.6xB0.8xH0.8 (mm) and is approved by IEC for various electronic devices requiring noise suppression in data lines.
EMI103T-RC
Bourns
Bourns EMI103T-RC is a 3-terminal data line filter with 10,000 Mohm insulation resistance and 50V rated voltage. It offers 25dB attenuation at max frequency of 15MHz, making it ideal for noise suppression in electronic circuits. With dimensions of L9.0xB3.2xH8.0 mm, this through-hole mount filter has a rated current of 5A and capacitance of 10,000uF.
ILHB0603ER600V
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 60 OHM; Terminal Finish: Nickel (Ni);
PA3747.705NL
Pulse Electronics
PA3747.705NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It offers inductance of 4580 uH, rated current of 1.5 A, and max operating temperature of 125 °C. Ideal for applications requiring high output impedance and through hole mounting.
BLM15AX100SN1D
BLM15AX100SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1.74A, and max operating temp of 125°C. It has a ferrite chip construction, DC resistance of 0.015 ohm, and output impedance of 10 ohm. Ideal for surface mount applications in electronics to suppress noise interference at frequencies ranging from 100 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQW15CNR20J00B
DATA LINE FILTER; Maximum DC Resistance: .47 ohm; Rated Current: .39 A; Height: .5 mm; JESD-609 Code: e3; Minimum Operating Temperature: -55 Cel;
LQW15CN18NJ00B
DATA LINE FILTER; Maximum DC Resistance: .046 ohm; Rated Current: 1.4 A; Terminal Finish: MATTE TIN OVER NICKEL; No. of Terminals: 2; Height: .5 mm;
LQW15CN18NJ00D
DATA LINE FILTER; Maximum DC Resistance: .046 ohm; Rated Current: 1.4 A; Terminal Finish: MATTE TIN OVER NICKEL; Width (mm): 0.55; Mounting Type: SURFACE MOUNT;
LQW15CN33NJ00B
DATA LINE FILTER; Maximum DC Resistance: .065 ohm; Rated Current: 1.3 A; Inductance: .033 uH; Dimensions: L1.0XB0.55XH0.5 (mm)/L0.039XB0.022XH0.02 (inch); JESD-609 Code: e3;
LQW15CN48NJ00B
DATA LINE FILTER; Maximum DC Resistance: .078 ohm; Rated Current: 1.1 A; Mounting Type: SURFACE MOUNT; No. of Functions: 1; Minimum Operating Temperature: -55 Cel;
LQW15CN48NJ00D
DATA LINE FILTER; Maximum DC Resistance: .078 ohm; Rated Current: 1.1 A; JESD-609 Code: e3; Packing Method: TAPE; No. of Terminals: 2;
LQW15CN70NJ00B
DATA LINE FILTER; Maximum DC Resistance: .12 ohm; Rated Current: .82 A; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; JESD-609 Code: e3;
LQW15CN70NJ00D
DATA LINE FILTER; Maximum DC Resistance: .12 ohm; Rated Current: .82 A; Terminal Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3; Height: .5 mm;
LQW15CN96NJ00B
DATA LINE FILTER; Maximum DC Resistance: .16 ohm; Rated Current: .73 A; Inductance: .096 uH; Height: .5 mm; Terminal Finish: MATTE TIN OVER NICKEL;
LQW15CN96NJ00D
DATA LINE FILTER; Maximum DC Resistance: .16 ohm; Rated Current: .73 A; Width (mm): 0.55; Dimensions: L1.0XB0.55XH0.5 (mm)/L0.039XB0.022XH0.02 (inch); Terminal Finish: MATTE TIN OVER NICKEL;
LQW15CNR13J00B
DATA LINE FILTER; Maximum DC Resistance: .23 ohm; Rated Current: .64 A; JESD-609 Code: e3; Terminal Finish: MATTE TIN OVER NICKEL; Packing Method: BULK;
LQW15CNR13J00D
DATA LINE FILTER; Maximum DC Resistance: .23 ohm; Rated Current: .64 A; No. of Functions: 1; Dimensions: L1.0XB0.55XH0.5 (mm)/L0.039XB0.022XH0.02 (inch); Height: .5 mm;
LQW15CNR16J00B
DATA LINE FILTER; Maximum DC Resistance: .33 ohm; Rated Current: .48 A; Maximum Operating Temperature: 125 Cel; Length: 1 mm; Minimum Operating Temperature: -55 Cel;
LQW15CNR16J00D
DATA LINE FILTER; Maximum DC Resistance: .33 ohm; Rated Current: .48 A; Length: 1 mm; Maximum Operating Temperature: 125 Cel; No. of Functions: 1;
LQW15CNR20J00D
DATA LINE FILTER; Maximum DC Resistance: .47 ohm; Rated Current: .39 A; Terminal Finish: MATTE TIN OVER NICKEL; Maximum Operating Temperature: 125 Cel; Packing Method: TAPE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved