Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER; Maximum DC Resistance: .12 ohm; Rated Current: .82 A; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters LQW15CN70NJ00B attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
LQW15CN70NJ00B Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
C0603C104K5RACTU
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
BSS84PH6327XTSA2
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Formosa Microsemi
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MPZ1608D101BTD25
TDK's MPZ1608D101BTD25 is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 100 ohms and max DC resistance of 0.15 ohm. Ideal for data line filtering applications due to its compact size and operating temperature range from -55°C to 125°C.
EMI103T-RC
Bourns
Bourns EMI103T-RC is a 3-terminal data line filter with 10,000 Mohm insulation resistance and 50V rated voltage. It offers 25dB attenuation at max frequency of 15MHz, making it ideal for noise suppression in electronic circuits. With dimensions of L9.0xB3.2xH8.0 mm, this through-hole mount filter has a rated current of 5A and capacitance of 10,000uF.
SRF4532-101Y
Bourns SRF4532-101Y is a Data Line Filter with 100uH inductance, 10 Mohm insulation resistance, and rated voltage of 50V. Ideal for applications requiring noise suppression in data lines, it operates b/w -40°C to 125°C and has a max DC resistance of 8.9 ohm.
W2F15C2228AT1F
KYOCERA AVX
KYOCERA AVX's W2F15C2228AT1F is a data line filter with 3 terminals, rated voltage of 50V, and capacitance of 2200uF. It features FEED THROUGH CAPACITOR type filtering for applications requiring insulation resistance of 1000 Mohm and operating temperatures from -55 to 125 °C. Ideal for surface mount installations in various electronic devices.
BLM31AF700SN1L
Murata Manufacturing
Murata Manufacturing's BLM31AF700SN1L is a Ferrite Chip Data Line Filter with 2 terminals, 70 Ohm output impedance, and 0.15 ohm max DC resistance. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronic devices requiring noise suppression.
782633601
Wuerth Elektronik & Kg
Wurth Elektronik 782633601 is a surface mount data line filter with AEC-Q200 screening. Features include FERRITE BEAD filter type, 1A rated current, and 600Ω output impedance. Ideal for automotive applications requiring noise suppression in compact spaces.
BLM18KG221SN1D
Murata Manufacturing's BLM18KG221SN1D is a chip bead data line filter with 2 terminals, rated for 2.2A current and 220 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BLM15GG221SN1D
Murata's BLM15GG221SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers an output impedance of 220 ohm and operates b/w -55°C to 125°C. With dimensions of L1.0xB0.5xH0.5 mm, this filter is designed for frequencies ranging from 100 MHz to 1000 MHz.
BLM18AG221SN1D
Murata's BLM18AG221SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 220 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of 1.6x0.8x0.8mm.
IP4256CZ5-W,115
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Rated Voltage: 5.6 V; Length: 1.7 mm; No. of Functions: 1; Approvals (V): IEC;
NFM41PC204F1H3
Murata Manufacturing's NFM41PC204F1H3 is a data line filter with 2A rated current, 0.2uF capacitance, and 50V rated voltage. It features feed through capacitor type for applications requiring noise suppression in electronic circuits. Operating temperature range from -55°C to 85°C makes it suitable for various environments.
MH3261-601Y
MH3261-601Y by Bourns is a chip bead data line filter with a min insulation resistance of 0.1 Mohm. It has a max operating temperature of 125 °C and is used for surface mount applications in filtering frequencies up to 100 MHz.
HF70ACC575032-T
The TDK HF70ACC575032-T is a chip bead data line filter with 2 terminals, operating b/w -40 to 125°C. With dimensions of L5.7xB5.0xH3.2 mm, it offers a max DC resistance of 0.04 ohm and output impedance of 300 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter is commonly used in electronic devices requiring noise suppression on data lines.
MPZ2012S331ATD25
The TDK MPZ2012S331ATD25 is a FERRITE CHIP filter with 330 OHM output impedance and 2.5 A rated current. With AEC-Q200 screening, it's ideal for automotive applications requiring data line filtering. This surface mount device operates b/w -55 to 125 °C, making it suitable for harsh environments.
HI1206T500R-10
Laird Technologies
HI1206T500R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -40 to 125 °C, has a DC resistance of 0.01 ohm, and output impedance of 50 OHM. Ideal for applications requiring surface mount filters in the frequency range of 25-1000 MHz.
ILHB0603120+/-25%
Vishay Intertechnology
Vishay Intertechnology's ILHB0603120+/-25% is a FERRITE CHIP filter with 120 OHM output impedance, suitable for data line applications. With dimensions of L1.6xB0.8xH0.8 mm and rated current of 2A, it operates b/w -55 to 125 °C, making it ideal for surface mount installations requiring low DC resistance (0.1 ohm).
MMZ2012Y102BT000
MMZ2012Y102BT000 by TDK is a chip bead data line filter with 2 terminals, rated current of 0.5A, and max DC resistance of 0.3 ohm. It is used for filtering in electronic circuits due to its ferrite construction and output impedance of 1000 ohm. Operating temperatures range from -55 to 125 °C.
BLM18PG471SN1
Murata Manufacturing's BLM18PG471SN1 is a FERRITE CHIP data line filter with 470 OHM output impedance, 1 A rated current, and 0.2 ohm max DC resistance. It operates b/w -55 to 125 °C and is ideal for surface mount applications requiring noise suppression in electronic circuits.
DLW43SH101XK2B
Murata Manufacturing's DLW43SH101XK2B is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 2 ohm max DC resistance. It has 4 terminals, rated for 0.2A current at 50V. Ideal for automotive applications due to AEC-Q200 screening level.
MMZ1608B601CT
The TDK MMZ1608B601CT is a 0603 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 600 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved