Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQM18NNR56K00D is a shielded, surface mount fixed inductor with 0.56 uH nominal inductance. Ideal for RF applications, it has a 25 MHz test frequency and operates b/w -40 to 85 °C.
Median Price
$0.097
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Newark
1+ parts
$0.230
100+ parts
$0.133
1k+ parts
$0.093
10k+ parts
-
Chip1Stop
$0.027
$0.026
$0.023
Verical
$0.079
$0.066
Mouser Electronics
$0.070
Farnell
$0.122
$0.080
$0.057
Future Electronics
$0.071
RS (Exports)
$0.098
$0.049
Rutronik
$0.051
A2Z Electronics, Inc.
EMSNET
SPM Sales
Prism Electronics
ACDS - Activité Composants Distribution Service
Sea View Technologies
Bristol Electronics
Nova Conductors
Corohmni
$0.382
Eastek
Perfect Parts
Metaverse IC Inc.
GreenTree Electronics
Glotronic Ltd.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Alle Elektronik GmbH
Kepictronics
iodParts Technologies Inc.
Netroflash
This allows for easy and convenient installation on circuit boards, saving space and simplifying assembly processes.
Shielding helps to reduce electromagnetic interference, ensuring better performance in sensitive electronic applications.
Dual ended terminals provide flexibility in circuit design and allow for easier connection to other components.
Tested at a high frequency, ensuring reliable performance in RF applications.
Provides a specific inductance value, suitable for various RF circuits and applications.
Can withstand high temperatures, making it suitable for a wide range of operating conditions.
Capable of handling a maximum rated current, ensuring stable performance under load.
The self-resonance frequency is above the test frequency, indicating minimal interference and good performance.
Low DC resistance allows for efficient power transfer and reduces power loss in the circuit.
Ferrite core material provides high magnetic permeability and low core losses, ideal for inductor applications.
Fixed Inductors LQM18NNR56K00D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQM18NNR56K00D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Yageo
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
B82793-S513-N201
TDK
The TDK B82793-S513-N201 is a surface mount fixed inductor with 51uH nominal inductance and 0.8A max rated current. It is a general-purpose filter choke suitable for various applications, featuring dual in-line terminal placement and a compact rectangular package measuring 7.1mm x 6mm x 4.9mm.
33466
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; DC Resistance: .0108 ohm; Terminal Placement: RADIAL;
41480
Pico Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
4622
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Placement: AXIAL;
744042003
Wuerth Elektronik & Kg
Wurth Elektronik 744042003 is a shielded SMT inductor with 3.3uH nominal inductance, ideal for power applications. It has a max operating temp of 125°C, rated current of 1.95A, and self-resonance frequency of 80MHz. Perfect for general purpose use due to its ferrite core material and compact rectangular package design.
MLZ1608N100LT
TDK's MLZ1608N100LT is a 10uH fixed inductor with dual-ended terminals, suitable for RF applications. It features a max operating temperature of 125°C, 0.3A rated current, and 20% tolerance. This shielded, surface-mount inductor has a compact 0603 size and ferrite core material.
DRA124-1R0-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Maximum Operating Temperature: 165 Cel;
SRU5016-101Y
Bourns
Bourns SRU5016-101Y is a shielded SMT inductor with 100uH nominal inductance, 0.85 ohm DC resistance, and 30% tolerance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.3A.
SRN3015-2R2M
Bourns SRN3015-2R2M is a shielded SMT inductor with 2.2uH nominal inductance, 1.8A max current, and 90MHz self-resonance freq. Ideal for power applications due to its compact size (3x3x1.5mm) and dual-ended terminals for easy installation in various electronic devices.
LQW15AN6N8G00D
Murata Manufacturing
Murata Manufacturing's LQW15AN6N8G00D is a wirewound chip inductor with 0.0068 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125 °C and a self-resonance frequency of 6000 MHz. This general-purpose inductor features dual-ended terminals and measures 0402 in size.
DR127-470-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
DRA73-1R0-R
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Manufacturer Series: DRA;
IHLP2020CZER1R5M11
Vishay Intertechnology's IHLP2020CZER1R5M11 is a shielded, high current inductor with 1.5uH nominal inductance and 9A max rated current. Ideal for general purpose applications, this SMT inductor has a self-resonance frequency of 46MHz and operates b/w -55°C to 125°C.
XFL4020-102MEC
Coilcraft
Coilcraft XFL4020-102MEC is a shielded, dual-ended power inductor with 1uH nominal inductance. Operating at -40 to 125°C, it has a max current of 11A and DC resistance of 0.0119 ohm. Ideal for general purpose applications requiring high performance in a compact SMT package.
DR74-151-R
Eaton Corporation
DR74-151-R by Eaton Corp is a shielded, surface mount fixed inductor with 150uH nominal inductance. It has a max rated current of 0.69A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
SRP4020TA-1R0M
Bourns SRP4020TA-1R0M is a shielded SMT inductor with 1uH nominal inductance, 5A max current, and 150°C max operating temp. Ideal for power applications due to its high quality factor, AEC-Q200 standard compliance, and compact rectangular package design.
5106
Frontier Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: FILTER CHOKE; No. of Terminals: 4; Shielded: NO; Surface Mount: NO; Terminal Placement: ON CIRCLE;
HK100515NJ-T
Taiyo Yuden
HK100515NJ-T by Taiyo Yuden is a 0402 multilayer chip inductor with 0.015 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, self-resonance frequency of 2300 MHz, and DC resistance of 0.46 ohm. Ideal for general purpose use due to its compact size and high quality factor.
CTIHLP5024F-220M
Central Technologies
CTIHLP5024F-220M by Central Technologies is a shielded, surface mount fixed inductor with 22uH nominal inductance and 5A max rated current. Ideal for power applications, it has dual-ended terminals and operates b/w -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQM18PHR47MFRL
Murata Manufacturing's LQM18PHR47MFRL is a shielded, surface mount inductor with 0.47uH nominal inductance and 1.1A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 100MHz and operates b/w -55 to 150°C.
LQM18PHR22MFRL
Murata Manufacturing's LQM18PHR22MFRL is a shielded, surface mount fixed inductor with dual-ended terminals. With a nominal inductance of 0.22uH and max rated current of 1.25A, it is ideal for power applications. This general purpose inductor has a self-resonance frequency of 100MHz and operates b/w -55 to 150°C, making it suitable for various electronic devices.
LQM18FN100M00D
Murata Manufacturing's LQM18FN100M00D is a shielded, dual-ended fixed inductor with 10uH nominal inductance. Ideal for power applications, it has a max operating temperature of 125°C and self-resonance frequency of 30MHz. This general-purpose inductor is compact (0603 size) and surface-mountable, making it suitable for various electronic devices.
LQM18PN1R0NC0L
LQM18PN2R2MGHD
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQM18DN100M70L
LQM18FN2R2M00D
LQM18FN2R2M00D by Murata is a 0603-sized fixed inductor with 2.2uH nominal inductance, suitable for RF applications. It features dual-ended terminals, ferrite core material, and operates b/w -55 to 125°C. With a max rated current of 0.12A and self-resonance frequency of 80MHz, it is ideal for general purpose inductor needs.
LQM18FN4R7M00D
LQM18FN4R7M00D by Murata Manufacturing is a surface mount, shielded fixed inductor with a nominal inductance of 4.7 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and a self-resonance frequency of 50 MHz.
LQM18NNR82K00D
LQM18NN1R2K00D
LQM18FN1R0M00D
LQM18FN1R0M00D by Murata Manufacturing is a surface mount, shielded fixed inductor with a nominal inductance of 1 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.15 A and a self-resonance frequency of 120 MHz.
LQM18NN1R8K00D
LQM18PN4R7MFRL
LQM18PN1R0MFRL
LQM18JNR10J00D
LQM18DN330M70L
LQM18PZ2R2MDHD
LQM18PZ2R2MFHD
LQM18NNR27K00D
LQM18NNR56K00J
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved