Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata's LQM18DN330M70L is a shielded, dual-ended fixed inductor with 33uH nominal inductance. Ideal for power applications, it operates b/w -55 to 125°C with a max current of 0.2A. Its compact 0603 size and ferrite core make it suitable for general purpose use.
Median Price
$0.090
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.120
100+ parts
$0.084
1k+ parts
$0.069
10k+ parts
$0.054
DigiKey
-
$0.056
Farnell
$0.068
$0.046
Element14
$0.095
Newark
$0.086
$0.072
TTI
$0.052
Future Electronics
$0.099
RS (Exports)
IBS Electronics
$0.062
Nova Conductors
Corohmni
$0.571
Continental Prestige Electronics
$0.085
$0.061
$0.057
Authorized Procurement Solutions
Argo Parts USA
Aranea Global
Allows for easy and quick installation onto a PCB, saving time and effort.
Provides protection against electromagnetic interference, ensuring stable performance.
Enables flexibility in circuit design as the inductor can be connected from either end.
Suitable for various power applications and circuits requiring a specific inductance value.
Capable of handling higher current loads without compromising performance.
Low resistance ensures efficient power transfer and minimal energy loss.
Indicates high frequency performance and stability in resonance conditions.
Ferrite core provides excellent magnetic properties for efficient inductance.
Fixed Inductors LQM18DN330M70L attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
LQM18DN330M70L Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Bkc Semiconductors
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
NXP Semiconductors
Siemens
BSS138-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
#FSLB2520-470K
Murata Manufacturing
Murata Manufacturing's #FSLB2520-470K is a chip fixed inductor with 47uH nominal inductance, 5.4 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for RF applications, this dual-ended SMT inductor operates b/w -40°C to 85°C and has a max rated current of 0.1A.
5606
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Shape: PRINTED WIRING PIN;
PA4334.392NLT
Pulse Electronics
PA4334.392NLT by Pulse Electronics is a shielded, dual-ended power inductor with 3.9uH nominal inductance and 1A max rated current. Ideal for general purpose applications, it features a self-resonance frequency of 53MHz and operates b/w -40°C to 125°C efficiently in SMT packages.
XAL5030-472MEC
Coilcraft
Coilcraft XAL5030-472MEC is a shielded, surface mount inductor with 4.7uH nominal inductance and 5.9A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 23MHz and AEC-Q200 reference standard compliance.
LQG15HN9N1J02D
Murata Manufacturing's LQG15HN9N1J02D is a 0402-sized fixed inductor with 0.0091 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 3400 MHz. This surface-mount inductor features dual-ended terminals and matte tin over nickel finish, making it ideal for general purpose use.
B82498F1222J000
TDK
The TDK B82498F1222J000 is a surface mount fixed inductor with 2.2uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, DC resistance of 1.6 ohm, and self-resonance frequency of 330 MHz. Ideal for general purpose use due to its compact size and high quality factor.
LQH44PN100MP0L
Murata Manufacturing's LQH44PN100MP0L is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.17A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 25MHz and operates b/w -40°C to 125°C.
DFE252012P-2R2M=P2
Murata Manufacturing's DFE252012P-2R2M=P2 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current. Ideal for power applications, it has a compact rectangular package measuring 2.5mm x 2mm x 1.2mm, operating b/w -40°C to 125°C efficiently at a test frequency of 1MHz.
4622
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Placement: AXIAL;
4646
Bourns
The Bourns 4646 is a wirewound fixed inductor with 240uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 7.2MHz, making it ideal for general purpose use in axial package style.
7447714330
Wuerth Elektronik & Kg
Wurth Elektronik 7447714330 is a shielded, dual-ended power inductor with 33uH nominal inductance. It has a max rated current of 2.5A and operates b/w -40 to 150°C. Ideal for general purpose applications requiring high-frequency performance and compact size.
N1342AAA-0001Z=P3
GENERAL PURPOSE INDUCTOR; Manufacturer Series: FSDVA;
5626
5626 by Bourns is a fixed inductor with 100uH nominal inductance, suitable for RF applications. Featuring 2 terminals, it has a max rated current of 14A and operates b/w -55 to 105°C. Ideal for general purpose use, this cylindrical package inductor has a radial terminal style.
DFE201612E-R47M=P2
Murata Manufacturing's DFE201612E-R47M=P2 is a shielded, dual-ended fixed inductor with 0.47uH nominal inductance and 4.5A max current rating. Ideal for power applications, it operates b/w -40 to 125°C and features a compact SMT package measuring 2x1.6x1.2mm.
XAL1010-153MED
Coilcraft XAL1010-153MED is a shielded, dual-ended power inductor with 15uH nominal inductance. It has a max rated current of 13.8A and operates b/w -40 to 125°C. Ideal for general purpose applications requiring high performance and reliability in compact SMT designs.
CTIHLP5024F-150M
Central Technologies
CTIHLP5024F-150M by Central Technologies is a shielded, surface mount fixed inductor with 15uH nominal inductance. It has a max rated current of 6A and operates b/w -55 to 125°C. Ideal for power applications requiring a general purpose inductor with dual-ended terminals.
DR74-220-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
IHLP3232CZER100M11
Vishay Intertechnology
Vishay Intertechnology's IHLP3232CZER100M11 is a shielded fixed inductor with 10uH nominal inductance, 5.3A max current, and 12MHz self-resonance freq. Ideal for DC-DC converters, it operates b/w -55°C to 125°C. With SMT packaging and dual-ended terminals, it suits various general-purpose applications.
MAKK2016T3R3M
Taiyo Yuden
MAKK2016T3R3M by Taiyo Yuden is a fixed inductor with 3.3uH nominal inductance, 1.15A max current, and -40 to 105°C operating range. Ideal for power applications, this SMT inductor features dual-ended terminals and metal core construction for efficient performance.
B82464G4472M000
The TDK B82464G4472M000 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 4.9A max rated current. Ideal for power applications, this general purpose inductor has a compact rectangular package (10.4mm x 10.4mm x 4.8mm) and operates b/w -55°C to 150°C efficiently.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQM18PHR47MFRL
Murata Manufacturing's LQM18PHR47MFRL is a shielded, surface mount inductor with 0.47uH nominal inductance and 1.1A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 100MHz and operates b/w -55 to 150°C.
LQM18PHR22MFRL
Murata Manufacturing's LQM18PHR22MFRL is a shielded, surface mount fixed inductor with dual-ended terminals. With a nominal inductance of 0.22uH and max rated current of 1.25A, it is ideal for power applications. This general purpose inductor has a self-resonance frequency of 100MHz and operates b/w -55 to 150°C, making it suitable for various electronic devices.
LQM18FN100M00D
Murata Manufacturing's LQM18FN100M00D is a shielded, dual-ended fixed inductor with 10uH nominal inductance. Ideal for power applications, it has a max operating temperature of 125°C and self-resonance frequency of 30MHz. This general-purpose inductor is compact (0603 size) and surface-mountable, making it suitable for various electronic devices.
LQM18PN1R0NC0L
LQM18PN2R2MGHD
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQM18DN100M70L
LQM18FN2R2M00D
LQM18FN2R2M00D by Murata is a 0603-sized fixed inductor with 2.2uH nominal inductance, suitable for RF applications. It features dual-ended terminals, ferrite core material, and operates b/w -55 to 125°C. With a max rated current of 0.12A and self-resonance frequency of 80MHz, it is ideal for general purpose inductor needs.
LQM18FN4R7M00D
LQM18FN4R7M00D by Murata Manufacturing is a surface mount, shielded fixed inductor with a nominal inductance of 4.7 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and a self-resonance frequency of 50 MHz.
LQM18NNR82K00D
LQM18NN1R2K00D
LQM18FN1R0M00D
LQM18FN1R0M00D by Murata Manufacturing is a surface mount, shielded fixed inductor with a nominal inductance of 1 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.15 A and a self-resonance frequency of 120 MHz.
LQM18NN1R8K00D
LQM18PN4R7MFRL
LQM18PN1R0MFRL
LQM18JNR10J00D
LQM18PZ2R2MDHD
LQM18PZ2R2MFHD
LQM18NNR56K00D
LQM18NNR27K00D
LQM18DN330M70B
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved