Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CERAMIC BPF; Width (mm): 1.25; Height: .95 mm; Maximum Operating Temperature: 85 Cel; I/O Impedance: 50 OHM; Packing Method: TR, EMBOSSED, 7 INCH;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Perfect Parts
1+ parts
100+ parts
1k+ parts
10k+ parts
Alle Elektronik GmbH
Ceramic Filters LFB212G45CL1D419 attributes and parameters. Explore more Ceramic Filters devices from Murata Manufacturing
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Voltage Standing Wave Ratio:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
LM555CM
Fairchild Semiconductor
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Cheng-yi Electronic
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
HFCG-2200+
Mini-circuits
CERAMIC HPF;
CER0357C
Cts
Cts CER0357C is a Ceramic BPF filter with 2 terminals, offering 22 dB attenuation at 1575 MHz. With a max insertion loss of 1.7 dB and operating temperature range from -40 to 85 °C, it's ideal for surface mount applications requiring high-frequency filtering.
BFCN-3085A+
The Mini-circuits BFCN-3085A+ is a Ceramic BPF filter with 4 terminals, operating from -55 to 100°C. It offers a max insertion loss of 2.5 dB at 3085 MHz and VSWR of 3, suitable for surface mount applications in RF circuits with 50 Ohm impedance.
LFCN-1800+
LFCN-1800+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 300000 kHz. With a center frequency of 2125 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters in the 50 OHM impedance range.
LFCN-1200+
LFCN-1200+ by Mini-circuits is a Ceramic LPF filter with a center frequency of 1530 MHz and max insertion loss of 1 dB. With an operating temperature range from -55 to 100°C, it's ideal for RF applications requiring low-pass filtering in the 50 Ohm impedance range.
LFCN-6000D
LFCN-6000D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.7 GHz. With a center frequency of 6.8 GHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50 ohms and dimensions of L3.2xB1.6xH0.94 mm.
SFSKA5M50CF00-R3
Murata Manufacturing
Murata Manufacturing's SFSKA5M50CF00-R3 is a Ceramic BPF filter with 5.5 MHz center frequency, 6 dB insertion loss, and -20 to 80°C operating temperature range. Ideal for surface mount applications in electronics requiring a compact ceramic filter solution.
3750BP14D0900T
Johanson Dielectrics
Johanson Dielectrics' 3750BP14D0900T is a Ceramic BPF filter with 1.7 dB max insertion loss, 3750 MHz center frequency, and -40 to 105 °C operating temperature range. Ideal for surface mount applications in RF circuits requiring high input power handling at 50 OHM impedance.
CDSCB10M7GA119-R0
Murata Manufacturing's CDSCB10M7GA119-R0 is a Ceramic BPF filter with 2 terminals, measuring L4.5xB2.0xH1.0 mm. It operates at 10.7 MHz and is ideal for surface mount applications in electronic devices requiring precise frequency filtering capabilities.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
2450BM14G0011T
Johanson Technology
2450BM14G0011T by Johanson Technology is a Ceramic BPF filter with a center frequency of 2450 MHz and max insertion loss of 1.8 dB. It operates b/w -40°C to 85°C, has dimensions of 1.6x0.8x0.6 mm, and is ideal for applications requiring a compact surface mount filter with an impedance of 50 ohms.
CFWLA450KGFA-B0
Murata Manufacturing's CFWLA450KGFA-B0 is a Ceramic BPF filter with 6 dB max insertion loss at 0.45 MHz. Measuring 11x7x7.5 mm, it has an I/O impedance of 2000 ohm and is mounted through hole. Ideal for applications requiring precise frequency filtering in compact spaces.
HFCN-880D+
The Mini-circuits HFCN-880D+ is a Ceramic HPF filter with 40 dB attenuation at 380 MHz. With a VSWR of 1.5, it operates b/w -55°C to 100°C and has a max insertion loss of 3 dB. Ideal for RF applications requiring high-frequency filtering in compact spaces.
LFCN-320D+
LFCN-320D+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at 180000 kHz. Operating b/w -55 to 100 °C, it has a center frequency of 460 MHz and max insertion loss of 3 dB. Ideal for applications requiring surface mount filters with 50 OHM impedance.
5697BP44A0360E
Johanson Dielectrics' 5697BP44A0360E is a Ceramic BPF filter with 5662.5 MHz center frequency, 2.5 dB insertion loss, and 3 W power rating. Ideal for surface mount applications in the temperature range of -40 to 85°C, it features silver/platinum terminal finish and TR packing method.
HFCN-2700
The Mini-circuits HFCN-2700 is a Ceramic HPF filter with 4 terminals, attaining 40 dB attenuation at 1 MHz. With a center frequency of 2500 MHz and VSWR of 1.5, it's ideal for RF applications requiring high-frequency filtering in a compact surface-mount design.
LFCN-120
LFCN-120 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 105 MHz. With a center frequency of 195 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating from -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 8.5 W efficiently.
LFCN-6000D+
LFCN-6000D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 20dB at min frequency and 30dB at max frequency. With a center frequency of 6800MHz, it has a VSWR of 1.3 and can handle an average input power of 9W. Ideal for applications requiring precise filtering in RF circuits.
B168MB1S
Knowles Precision Devices
B168MB1S by Knowles Precision Devices is a Ceramic BPF filter with 2.75 dB max insertion loss, operating from -55 to 125°C. With a center frequency of 16750 MHz, it has a compact size of 8.89mm x 5.08mm x 2.489mm for surface mount applications in RF systems requiring a 50Ω impedance.
2450FM07B0037T
Johanson Technology's 2450FM07B0037T is a Ceramic LPF filter with a center frequency of 2450 MHz and max insertion loss of 0.8 dB. Ideal for applications requiring high input power up to 3 W, it operates in temperatures ranging from -40°C to 85°C. Suitable for surface mount installations with an impedance of 50Ω.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved