Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
GRJ32DR73A153KWJ1L by Murata Manufacturing is a ceramic capacitor with capacitance of 0.015 uF and rated DC voltage of 1000 V. With a temperature coefficient of 15% ppm/°C, it operates b/w -55 to 125 °C making it suitable for various applications in electronics requiring stable capacitance at high voltages. Its compact SMT package style and multi-layer design make it ideal for surface mounting in electronic circuits.
Median Price
$1.300
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Newark
1+ parts
100+ parts
$0.621
1k+ parts
$0.427
10k+ parts
-
Nova Conductors
$0.739
Vyrian
Corohmni
$0.239
Advanced Electronics
$0.252
$0.240
Aztec Data Supply Inc.
$0.260
Argo Parts USA
Continental Prestige Electronics
$0.724
Semicontronic
$1.280
$1.248
$1.242
Authorized Procurement Solutions
Ceramic dielectric materials are known for their stable performance over a wide range of temperatures, making this capacitor reliable for various applications.
Rectangular packages are space-efficient and easy to mount, making them suitable for densely populated circuit boards.
Multi-layer construction allows for higher capacitance values in a compact size, ideal for applications where space is limited.
Embossed tape packaging ensures easy handling and automated pick-and-place during manufacturing, improving efficiency.
Having two terminals simplifies the connection process and increases the stability of the capacitor in the circuit.
Surface Mount Technology (SMT) allows for direct placement on the surface of a PCB, reducing the required board space and enabling high-density mounting.
Wraparound terminals provide a strong mechanical connection to the PCB, ensuring secure placement and enhancing reliability.
The tight negative tolerance of 10% ensures that the actual capacitance value does not deviate significantly from the specified value, promoting accurate circuit performance.
X7R temperature characteristics indicate stability over a wide temperature range, making this capacitor suitable for demanding environmental conditions.
With a high maximum operating temperature of 125°C, this capacitor can withstand elevated temperatures without compromising its performance.
Ceramic capacitors are known for their low cost, high stability, and ease of manufacturing, making them a popular choice for various electronic applications.
The wide operating temperature range allows this capacitor to function in extreme cold environments, providing reliability in harsh conditions.
The temperature coefficient of 15% indicates the change in capacitance with temperature, allowing for precise adjustments in circuit performance.
The compact height of 2 mm enables this capacitor to fit in tight spaces while maintaining high performance.
The slim width of 2.5 mm contributes to the compact design of this capacitor, suitable for applications where board space is limited.
Surface mounting feature simplifies the assembly process and saves space on the PCB, making it ideal for compact electronic devices.
The length of 3.2 mm strikes a balance between compact size and sufficient surface area for stable mounting, ensuring secure placement on the PCB.
The positive tolerance of 10% ensures that the capacitor's actual capacitance value does not exceed the specified value by a significant margin, maintaining consistent circuit performance.
With a capacitance of 0.015 uF, this capacitor can store and release electrical energy as needed, contributing to the functionality of the circuit.
The high rated DC voltage of 1000 V allows this capacitor to handle high voltage applications with reliability and stability.
Fixed Capacitors GRJ32DR73A153KWJ1L attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Shape:
Width:
GRJ32DR73A153KWJ1L Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
BAV99
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
General Semiconductor
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Zetex Plc
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
EU2B-YS3303C
Idec
ROTARY SWITCH;
EMVY101ARA101MKE0S
United Chemi-con
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 100 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Polarity: POLARIZED;
C0603C104K8RACTU
KEMET Corporation
KEMET Corporation's C0603C104K8RACTU is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package with wraparound terminals.
C0402C103K5RACAUTO
KEMET C0402C103K5RACAUTO is a ceramic capacitor with 0.01uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT mounting in a rectangular package with matte tin over nickel terminal finish.
GCJ32ER71H475KA12L
Murata Manufacturing
Murata Manufacturing's GCJ32ER71H475KA12L is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style for surface mounting.
M39006/22-0345
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
ZRB18AR61E106ME01L
Murata Manufacturing's ZRB18AR61E106ME01L is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 15% temp coef. Ideal for SMT applications due to its small size (1.6mm x 0.8mm x 1mm) and wraparound terminals.
C1005X5R1E105K050BC
TDK
The TDK C1005X5R1E105K050BC is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and wraparound terminals for surface mounting in various electronic devices.
C3216X7R1H106K160AE
The TDK C3216X7R1H106K160AE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size and high reliability.
CC0402KRX5R5BB105
Yageo
Yageo CC0402KRX5R5BB105 is a 1uF ceramic capacitor with X5R temp coef, 10% tolerance, and 6.3V rated DC voltage. Ideal for SMT applications in electronics for its compact 0402 size and temperature stability from -55 to 85°C.
GRM155R61C105KA12D
The Murata Manufacturing GRM155R61C105KA12D is a ceramic capacitor with 1uF capacitance, rated for 16V. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Commonly used in SMT applications due to its small size (1x0.5x0.5mm) and multi-layer design for compact electronics.
C1210C475K4PACTU
KEMET C1210C475K4PACTU is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications in electronics requiring compact size and reliable performance.
C0603C104K5RACAUTO7411
KEMET Corporation's C0603C104K5RACAUTO7411 is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
C0603C103K5RACAUTO
KEMET C0603C103K5RACAUTO is a ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature code. Ideal for automotive applications due to AEC-Q200 standard compliance, -55 to 125 °C operating range, and compact SMT package design. Suitable for various electronic circuits requiring stable performance in harsh environments.
M39006/22-0350
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C5750X7R1C476M230KB
The TDK C5750X7R1C476M230KB is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 20% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and surface mounting feature.
C0402C473K4RACAUTO
KEMET C0402C473K4RACAUTO is a ceramic capacitor with 0.047uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and matte tin terminal finish.
GMJ316BB7106KLHT
Taiyo Yuden
Taiyo Yuden GMJ316BB7106KLHT is a ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 35V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 3.2mm x 1.6mm x 1.6mm dimensions.
GCM155R71H102KA37D
Murata Manufacturing's GCM155R71H102KA37D is a ceramic capacitor with 0.001uF capacitance, X7R temperature characteristics, and 10% tolerance. It operates b/w -55 to 125 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
M39006/25-0143
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
EEE1HA4R7WR
Panasonic
Panasonic EEE1HA4R7WR is a 4.7uF aluminum electrolytic capacitor with 50V rated DC voltage, suitable for AEC-Q200 standards. It features tan delta of 0.14, leakage current of 0.003mA, and ripple current of 18mA, making it ideal for automotive applications requiring high reliability in a compact SMT package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GRJ31BR72J682KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0068 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ31CZ72A475KE01L
GRJ31CZ72A475KE01L by Murata Manufacturing is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in electronic circuits.
GRJ32DC72A475KE11L
GRJ32DC72A475KE11L by Murata is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. Its X7S temperature characteristics make it suitable for applications requiring stable performance in a wide temperature range (-55 to 125 °C). With a compact SMT package style, it is ideal for surface mounting in various electronic devices.
GRJ32ER71H106KE11L
Murata Manufacturing's GRJ32ER71H106KE11L is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. It is used in surface mount applications for its compact size and high operating temperature range of -55 to 125°C.
GRJ31BR73A102KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ32DR73A223KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .022 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ31CC72A475KE01K
Murata Manufacturing's GRJ31CC72A475KE01K is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring compact rectangular package design.
GRJ31CC72A475KE01L
GRJ31CC72A475KE01L by Murata Manufacturing is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. It has X7S temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.
GRJ31CR73A103KWJ3L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ32ER71A476KE11L
Murata Manufacturing's GRJ32ER71A476KE11L is a ceramic capacitor with 47uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. It is used in surface mount applications due to its compact rectangular package shape and wraparound terminals.
GRJ31CR71H475KE11L
Murata Manufacturing's GRJ31CR71H475KE11L is a 1206 SMT ceramic capacitor with 4.7uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
GRJ31CR72E104KWJ3L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ31CC71H475KE11K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ31CC71H475KE11L
GRJ32DR72J473KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ32EC71H106KE11L
Murata Manufacturing's GRJ32EC71H106KE11L is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications due to its compact size of 3.2mm x 2.5mm x 2.5mm and wraparound terminals for easy installation.
GRJ32EC71E226KE11L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ32QR72J223KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .022 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ32EC71E226KE11K
GRJ32DR73A153KWJ1K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .015 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved