Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's GRJ31CR73A103KWJ3L is a ceramic capacitor with 0.01uF capacitance and 1000V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance under varying temperatures.
Median Price
$0.440
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Newark
1+ parts
$0.578
100+ parts
$0.268
1k+ parts
$0.204
10k+ parts
-
TTI Europe
Farnell
$0.303
$0.161
Nova Conductors
$0.238
Vyrian
Continental Prestige Electronics
$0.233
Argo Parts USA
$0.231
Authorized Procurement Solutions
Ceramic dielectric material provides excellent temperature stability and low loss, making this capacitor suitable for a wide range of operating conditions.
Rectangular packaging allows for efficient use of space on circuit boards and easy integration into existing designs.
Multi-layer construction provides high capacitance in a compact size, ideal for applications where space is limited.
TR packaging with embossed tape and 7-inch reel makes it convenient for automated pick-and-place assembly processes.
Two terminals simplify the connection process and ensure reliable electrical contact.
Surface mount technology (SMT) allows for easy and secure attachment to PCBs, enhancing durability and reliability.
Wraparound terminals provide a strong mechanical connection, reducing the likelihood of vibration-induced failures.
With a negative tolerance of 10%, this capacitor ensures consistency in performance and reliable operation within specified limits.
X7R temperature characteristics indicate a stable capacitance value over a wide temperature range, making it suitable for diverse environmental conditions.
With a high maximum operating temperature of 125°C, this capacitor is suitable for demanding applications and harsh operating environments.
Ceramic capacitors are known for their reliability, stability, and high capacitance values, making them a popular choice for various electronic applications.
A minimum operating temperature of -55°C ensures functionality even in extreme cold conditions, making this capacitor versatile and resilient.
The low temperature coefficient of 15% indicates minimal variation in capacitance with temperature changes, ensuring consistent performance over a wide range of operating conditions.
Surface mount capability simplifies assembly processes, reduces board space requirements, and enhances the overall reliability of the product.
Low profile design with a height of 1.6mm enables compact and space-efficient PCB layouts, ideal for applications with size constraints.
Square dimensions with a width of 1.6mm offer uniformity and symmetry, ensuring consistent electrical performance and ease of placement on the PCB.
With a length of 3.2mm, this capacitor provides a balance between compact size and proper separation for optimal circuit performance.
A positive tolerance of 10% ensures that the actual capacitance value will not exceed the specified limit, guaranteeing reliable and consistent operation.
With a capacitance of 0.01uF, this capacitor is suitable for filtering, decoupling, and resonance applications in electronic circuits.
A high rated DC voltage of 1000V makes this capacitor suitable for high voltage applications, ensuring reliable insulation and performance under elevated voltage conditions.
Fixed Capacitors GRJ31CR73A103KWJ3L attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Shape:
Width:
GRJ31CR73A103KWJ3L Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
4554
Jw Miller Magnetics
Other Semiconductors;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
FDLL4148
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
GCM188R72A103KA37D
Murata Manufacturing
Murata Manufacturing's GCM188R72A103KA37D is a ceramic capacitor with 0.01uF capacitance, 100V URdc, and X7R temperature characteristics. It is used in SMT applications for automotive electronics due to AEC-Q200 compliance and compact size of 1.6mm x 0.8mm x 0.8mm.
M39006/220350
Cornell Dubilier Electronics
M39006/220350 by Cornell Dubilier Electronics is a TANTALUM (WET) capacitor with a capacitance of 47 uF and rated DC voltage of 50 V. It has a tan delta of 0.11, leakage current of 0.001 mA, and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in through hole mount applications.
M39006/22-0360
KEMET Corporation
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 160 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C105K3PACTU
KEMET C0603C105K3PACTU is a 1uF ceramic capacitor with 10% tolerance, X5R temp coefficient, and 25V rated voltage. Ideal for SMT applications, it operates b/w -55°C to 85°C. Suitable for various electronic devices requiring compact and reliable capacitors.
C0603C104K3RACAUTO
KEMET C0603C104K3RACAUTO is a ceramic capacitor with 0.1uF capacitance, 25V rated DC voltage, and X7R temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance, -55 to 125 °C operating range, and compact SMT package design.
AR215C104K4R
KYOCERA AVX
AR215C104K4R by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating temperature range, and radial package style. Ideal for applications requiring high reliability in automotive electronics due to AEC-Q200 reference standard compliance.
CL10B475KQ8NQNC
Samsung Electro-mechanics
CL10B475KQ8NQNC by Samsung Electro-mechanics is a ceramic capacitor with a capacitance of 4.7 uF and a rated DC voltage of 6.3 V. It has a temperature coefficient of 0.15 ppm/°C and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
GRM155R61C105KA12D
The Murata Manufacturing GRM155R61C105KA12D is a ceramic capacitor with 1uF capacitance, rated for 16V. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Commonly used in SMT applications due to its small size (1x0.5x0.5mm) and multi-layer design for compact electronics.
GRM155R71E103KA01D
Murata Manufacturing's GRM155R71E103KA01D is a ceramic capacitor with 0.01uF capacitance and 25V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
C2012X7R1V475K125AC
TDK
TDK C2012X7R1V475K125AC is a SMT ceramic capacitor with 4.7uF capacitance, rated at 35V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact design and stable performance in various electronic devices.
C0805C104K5RAC
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C3216X5R1C476M160AB
TDK's C3216X5R1C476M160AB is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring compact size and high capacitance stability.
VJ0805Y104JXAAT
Vishay Intertechnology
Vishay Intertechnology's VJ0805Y104JXAAT is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 150°C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
T491A475K016AT
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
GA355DR7GF472KW01L
Murata Manufacturing's GA355DR7GF472KW01L is a ceramic capacitor with 0.0047uF capacitance, X7R temperature characteristics, and 250V rated AC voltage. Ideal for surface mount applications in electronics due to its compact size and high operating temperature range of -55 to 125 °C.
CGA3E2C0G1H120J080AA
TDK's CGA3E2C0G1H120J080AA is a 0603 SMT ceramic capacitor with capacitance of 0.000012 uF, rated for 50V. With C0G temperature characteristics and 30ppm/°C temp coef, it's ideal for AEC-Q200 applications requiring high precision and stability in harsh environments.
EMK107B7105KA-T
Taiyo Yuden
EMK107B7105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 125°C, making it suitable for various electronic applications requiring stable performance in a compact SMT package.
C1206F104K1RACTU
C1206F104K1RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 100 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This surface mount capacitor is commonly used in electronic circuits for various applications.
CC1206KKX7RDBB102
Yageo
CC1206KKX7RDBB102 by Yageo is a ceramic capacitor with a capacitance of 0.001 uF and a rated DC voltage of 2000 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This fixed capacitor is commonly used in surface mount applications.
ZRB18AR61E106ME01L
Murata Manufacturing's ZRB18AR61E106ME01L is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 15% temp coef. Ideal for SMT applications due to its small size (1.6mm x 0.8mm x 1mm) and wraparound terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GRJ32DR73A153KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .015 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ31BR72J682KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0068 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ31CZ72A475KE01L
GRJ31CZ72A475KE01L by Murata Manufacturing is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in electronic circuits.
GRJ32DC72A475KE11L
GRJ32DC72A475KE11L by Murata is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. Its X7S temperature characteristics make it suitable for applications requiring stable performance in a wide temperature range (-55 to 125 °C). With a compact SMT package style, it is ideal for surface mounting in various electronic devices.
GRJ32ER71H106KE11L
Murata Manufacturing's GRJ32ER71H106KE11L is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. It is used in surface mount applications for its compact size and high operating temperature range of -55 to 125°C.
GRJ31BR73A102KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ32DR73A223KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .022 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ31CC72A475KE01K
Murata Manufacturing's GRJ31CC72A475KE01K is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring compact rectangular package design.
GRJ31CC72A475KE01L
GRJ31CC72A475KE01L by Murata Manufacturing is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. It has X7S temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.
GRJ32ER71A476KE11L
Murata Manufacturing's GRJ32ER71A476KE11L is a ceramic capacitor with 47uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. It is used in surface mount applications due to its compact rectangular package shape and wraparound terminals.
GRJ31CR71H475KE11L
Murata Manufacturing's GRJ31CR71H475KE11L is a 1206 SMT ceramic capacitor with 4.7uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
GRJ31CR72E104KWJ3L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ31CC71H475KE11K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ31CC71H475KE11L
GRJ32DR72J473KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ32EC71H106KE11L
Murata Manufacturing's GRJ32EC71H106KE11L is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications due to its compact size of 3.2mm x 2.5mm x 2.5mm and wraparound terminals for easy installation.
GRJ32EC71E226KE11L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ32QR72J223KWJ1L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .022 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRJ32EC71E226KE11K
GRJ31CR73A103KWJ3K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved