Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER; Rated Current: 6 A; Length: 8 mm; Capacitance: 1000 uF; Maximum Operating Temperature: 85 Cel; No. of Terminals: 3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters DSS6NB32A102T41B attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Capacitance:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Material:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
DSS6NB32A102T41B Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Surge Components
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MI0805K400R-10
Laird Technologies
MI0805K400R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 40 OHM. Ideal for surface mount applications in various electronic devices requiring noise suppression and signal filtering capabilities.
NFE61PT472C1H9L
Murata Manufacturing
Murata Manufacturing's NFE61PT472C1H9L is a 3-terminal data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 4700uF capacitance. It operates b/w -25°C to 85°C and is ideal for surface mount applications requiring noise filtering in data lines.
D-08C2A
Tokin
DATA LINE FILTER; Maximum DC Resistance: .07 ohm; Rated Current: .5 A; Width (mm): 16.0; Rated Voltage: 50 V; Dimensions: L21.0XB16.0XH14.0 (mm)/L0.827XB0.63XH0.551 (inch);
ACP3225-102-2P-TL000
TDK
TDK's ACP3225-102-2P-TL000 is a 2-function data line filter with 60V rated voltage and 1.2A current. With dimensions of L3.2xB2.5xH1.9 mm, it operates b/w -25 to 85 °C, ideal for surface mount applications in various electronic devices.
MMZ1608S601ATA00
TDK's MMZ1608S601ATA00 is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and min operating temperature of -55°C. This surface mount filter, measuring L1.6XB0.8XH0.8 (mm), is commonly used for impedance matching in electronic circuits.
ACM7060-701-2PL-TL01
TDK's ACM7060-701-2PL-TL01 is a data line filter with 2 functions, rated at 80V and 4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L7.0xB6.0xH3.5 mm. Ideal for applications requiring noise suppression in data lines.
YFF31HC2A105MT000N
YFF31HC2A105MT000N by TDK is a FEED THROUGH CAPACITOR with 100 V rated voltage, 40 dB max insertion loss, and 6 A rated current. Ideal for data line filtering applications due to its compact dimensions of L3.2XB1.6XH1.3 (mm) and surface mounting type.
FBMH3225HM601NT8
Taiyo Yuden
Taiyo Yuden's FBMH3225HM601NT8 is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40°C to 125°C, measures 3.2mm in length, and is ideal for surface mount applications requiring noise suppression in electronic circuits.
BK1608HS220-TV
BK1608HS220-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 22 OHM output impedance. Ideal for data line filtering applications due to its compact dimensions of L1.6xB0.8xH0.8 (mm) and surface mounting type.
4400-099LF
Cts
4400-099LF by Cts is a Data Line Filter with 20000 Mohm Min Insulation Resistance, 50 V Rated Voltage, and FEED THROUGH CAPACITOR filter type. It operates b/w -55 to 125 °C, has a Max Insertion Loss of 70 dB, and a Capacitance of 50000 uF. Ideal for panel mounting applications requiring up to 10 A rated current.
FCFBMJ2125HS420-T
Taiyo Yuden's FCFBMJ2125HS420-T is a Ferrite Chip Data Line Filter with 2 terminals, 42 Ohm output impedance, and 4A rated current. It operates b/w -40°C to 85°C, has a max DC resistance of 0.008 ohm, and dimensions of L2.0xB1.25xH0.85 (mm). Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
NFM21CC471R1H3D
Murata Manufacturing's NFM21CC471R1H3D is a data line filter with 470uF capacitance, 50V rated voltage, and 1A rated current. It features a feed through capacitor design for high insulation resistance applications. Ideal for surface mount installations in various electronic devices operating b/w -55°C to 125°C.
BLM21AG151SN1D
BLM21AG151SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to reduce noise in data lines.
BLM18SG121TN1
Murata Manufacturing's BLM18SG121TN1 is a FERRITE CHIP data line filter with 120 OHM output impedance, 3A rated current, and -55 to 125 °C operating temperature range. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.
NFW31SP106X1E4L
Murata Manufacturing's NFW31SP106X1E4L is a 3-terminal data line filter with 30 dB attenuation at 1000 MHz. It operates b/w -40 to 85 °C and has a rated voltage of 25 V, making it ideal for high-frequency noise suppression in electronic devices. With dimensions of L3.2XB1.6XH1.8 mm, this surface mount filter offers max insertion loss of 30 dB and is suitable for tape and reel packaging applications.
742792118
Wuerth Elektronik & Kg
Wurth Elektronik 742792118 is a chip bead data line filter with FERRITE CHIP type. It operates b/w -55 to 125 °C, has 80-100 MHz frequency range, and 600 OHM output impedance. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
BLM21PG600SN1
Murata Manufacturing's BLM21PG600SN1 is a FERRITE CHIP data line filter with dimensions 2x1.25x0.85mm, rated current of 3A, and output impedance of 60 ohm. It operates b/w -55 to 125°C, has a max DC resistance of 0.025 ohm, and is designed for surface mount applications in electronic devices.
P0473NLT
Pulse Electronics
Pulse Electronics P0473NLT is a data line filter with 2 functions, AEC-Q200 screening level. It offers inductance of 880uH, max operating temp of 120°C, and rated current of 1.63A. Ideal for applications requiring surface mount filters with dimensions L12.7xB12.7xH5.46mm like automotive electronics.
BLM18KG102SN1D
Murata Manufacturing's BLM18KG102SN1D is a FERRITE CHIP filter with 2 terminals, rated at 0.8A current and 1000Ω output impedance. It operates b/w -55°C to 125°C, ideal for data line filtering in surface mount applications.
BNX022-01L
BNX022-01L by Murata Manufacturing is a data line filter with a rated voltage of 50V and attenuation of 35dB at max frequency. It has a compact size of L12.1XB9.1XH3.1 (mm) and is suitable for surface mount applications in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved