Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Murata Manufacturing DLM0QSB350HY2D data line filter has 2 functions, rated at 5V with a max operating temperature of 85°C. With a min insulation resistance of 10 Mohm and output impedance of 35 ohm, it is ideal for applications requiring noise filtering in electronic circuits.
Median Price
$0.106
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.110
100+ parts
$0.072
1k+ parts
$0.059
10k+ parts
$0.055
Mouser Electronics
$0.060
$0.048
RS (Exports)
-
Farnell
$0.054
$0.044
Element14
$0.092
$0.074
Newark
$0.082
$0.070
Nova Conductors
Corohmni
$3.212
Continental Prestige Electronics
$0.063
$0.043
$0.037
Authorized Procurement Solutions
Netroflash
Ensures high insulation to prevent leakage current and ensure safety in electrical circuits.
Offers multiple filtering functions in a single component, providing efficient data line filtering.
Suitable for use with devices that operate at 5V, ensuring compatibility.
Provides multiple connection points for easy integration into circuits.
Specifically designed for effective filtering of data lines, ensuring signal integrity.
Can withstand high temperatures, making it suitable for various environmental conditions.
Capable of operating in extremely low temperatures, increasing versatility.
Compact size allows for space-saving installation in electronic devices.
Provides low resistance to maintain signal quality and efficiency.
Optimal length for fitting into circuits without taking up excessive space.
Offers the desired impedance for effective filtering of data signals.
Easily mountable on the surface of PCBs, simplifying assembly processes.
Designed to handle currents up to 0.12A, suitable for various electronic applications.
Low profile design for thin electronic devices and space-constrained applications.
Data Line Filters DLM0QSB350HY2D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
DLM0QSB350HY2D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
1N4148WT
Surge Components
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
MICRODIODE ELECTRONICS SHENZHEN CO LTD
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
D-08C2A
KEMET Corporation
The KEMET Corporation D-08C2A is a data line filter with 4 functions, rated at 50V and 0.5A. It offers a min insulation resistance of 10 Mohm and operates b/w -25 to 65°C. With dimensions of L21.0xB16.0xH14.0 mm, it is ideal for applications requiring noise filtering in electronic circuits.
EMI5204MUTAG
EMI5204MUTAG by Onsemi is a data line filter with 4 functions and 8 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount filter is suitable for applications requiring a capacitance of 14 uF and an output impedance of 50 ohm.
74279221111
Wuerth Elektronik & Kg
Wurth Elektronik 74279221111 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 5.4A current and 110Ω output impedance. Ideal for surface mount applications, it operates b/w -55°C to 125°C, measuring L3.2xB1.6xH1.1mm (L0.126xB0.063xH0.043 inch).
LI0805G301R-10
Laird Technologies
Laird Technologies' LI0805G301R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 mm, it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 ohm. Ideal for surface mount applications, it has a max DC resistance of 0.2 ohm and rated current of 0.7 A.
DLW43SH101XK2K
Murata Manufacturing
DLW43SH101XK2K by Murata Manufacturing is a FERRITE CHIP filter with 100uH inductance and 10 Mohm min insulation resistance. It has 2 functions, rated at 50V and 0.2A, suitable for AEC-Q200 applications in automotive electronics due to its compact size of L4.5xB3.2xH2.6mm for surface mounting.
HI1812V101R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 8 A;
BLM18AG601SN1J
Murata Manufacturing's BLM18AG601SN1J is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it operates b/w -55 to 125 °C and has a max DC resistance of 0.38 ohm. With dimensions of L1.6xB0.8xH0.8 (mm), it is ideal for applications requiring a 600 OHM output impedance at frequencies ranging from 100 MHz, packed in tape for surface mount installation.
ACM2012-201-2P-T002
TDK
ACM2012-201-2P-T002 by TDK is a FERRITE CHIP data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications requiring a compact size (L2.0XB1.2XH1.3 mm) and offers a min insulation resistance of 10 Mohm.
TPD4F003DQDR
TPD4F003DQDR by Texas Instruments is a data line filter with 4 functions and 8 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount device is suitable for applications requiring protection against voltage spikes and noise in data lines.
DR331-513AE
Bourns
Bourns DR331-513AE is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. With dimensions of L7.3xB5.4xH4.7 (mm), it's ideal for surface mount applications in temperature range -40 to 135°C, offering max DC resistance of 0.3 ohm and rated current of 0.5A.
BLM18BA220SN1D
Murata's BLM18BA220SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 22 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of 1.6x0.8x0.8mm.
74279271
Wurth Elektronik 74279271 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 mm and output impedance of 120 OHM. Rated current is 0.5 A, making it ideal for surface mount installations in electronic devices up to 600 MHz frequency range.
VFS6VD81E221T51B
Murata Manufacturing's VFS6VD81E221T51B is a 25V data line filter with 0.5 Mohm insulation resistance. It operates b/w -40 to 105 °C and has a capacitance of 220 uF. Ideal for applications requiring through hole mounting, rated current of 6A, and compact dimensions of L8.0xB2.54xH10.5 mm.
NFM18CC221R1C3D
Murata Manufacturing's NFM18CC221R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 220uF capacitance. It is a feed through capacitor suitable for applications requiring filtering of data lines in electronic circuits.
BLM18PG471SN1D
BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
MPZ1608S221ATD25
TDK's MPZ1608S221ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 2.2A current and 220 ohm output impedance. Operating b/w -55°C to 125°C, it's ideal for data line filtering in surface mount applications due to its compact dimensions of L1.6xB0.8xH0.8 mm.
744824101
Wurth Elektronik 744824101 is a UL-approved data line filter with 2 functions, rated at 250V and 10A. With inductance of 1000uH, it operates b/w -40 to 125 °C, ideal for applications requiring noise suppression in data transmission systems.
BLM18KG331SN1D
Murata Manufacturing's BLM18KG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.08 ohm and output impedance of 330 OHM at 100 MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression.
BLM18PG121SN1D
Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
SRF0905-100Y
Bourns SRF0905-100Y is a Data Line Filter with 2 functions, rated voltage of 50V, and inductance of 10uH. It operates b/w -40°C to 105°C, has a max DC resistance of 0.08 ohm, and output impedance of 200 ohm. Ideal for surface mount applications requiring filtering in data lines with a current rating of 1.6A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DLM0NSM900HY2D
DATA LINE FILTER; Maximum DC Resistance: 4.75 ohm; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; Minimum Insulation Resistance: 10 Mohm; Mounting Type: SURFACE MOUNT;
DLM0NSN900HY2D
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Rated Current: .1 A; Output Impedance (ohm): 90 OHM; Packing Method: TR, PAPER, 7 INCH; Maximum Operating Temperature: 85 Cel;
DLM0QSN650HY2D
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; Rated Current: .1 A; Rated Voltage: 5 V; Width (mm): 0.5; Length: .65 mm;
DLM0NSB120HY2D
DLM0NSB120HY2D by Murata Manufacturing is a data line filter with a rated voltage of 5V and a max operating temperature of 85°C. It has 2 functions and a min insulation resistance of 10 Mohm, making it suitable for various applications requiring effective filtering and protection.
DLM0QSN900HY2D
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Rated Current: .05 A; Minimum Insulation Resistance: 10 Mohm; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel;
DLM0QSB120HY2D
The Murata Manufacturing DLM0QSB120HY2D is a Data Line Filter with 2 functions, rated at 5V. It has a max operating temperature of 85°C and min insulation resistance of 10 Mohm. This filter is ideal for applications requiring noise suppression in data lines, offering a compact design suitable for surface mounting.
DLM0QSN500HY2D
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; Rated Current: .1 A; Maximum Operating Temperature: 85 Cel; No. of Functions: 2; Mounting Type: SURFACE MOUNT;
DLM0QSN900HY2B
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Rated Current: .05 A; Mounting Type: SURFACE MOUNT; Width (mm): 0.5; No. of Functions: 1;
DLM0QSB120HY2B
DATA LINE FILTER; Maximum DC Resistance: 2 ohm; Rated Current: .15 A; Length: .65 mm; No. of Terminals: 4; Rated Voltage: 5 V;
DLM0QSB350HY2B
DATA LINE FILTER; Maximum DC Resistance: 2.875 ohm; Rated Current: .12 A; Packing Method: BAG; BULK; Rated Voltage: 5 V; Maximum Operating Temperature: 85 Cel;
DLM0QSN500HY2B
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; Rated Current: .1 A; Width (mm): 0.5; No. of Functions: 2; Length: .65 mm;
DLM0QSN650HY2B
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; Rated Current: .1 A; Minimum Insulation Resistance: 10 Mohm; Minimum Operating Temperature: -40 Cel; Height: .3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved