Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BLM31KN121SN1L by Murata is a FERRITE CHIP filter with 2 terminals, rated for 4A current. It has a DC resistance of 0.009 ohm and an output impedance of 120 OHM. Ideal for data line filtering applications due to its compact size and surface mounting type.
Median Price
$0.163
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.380
100+ parts
$0.185
1k+ parts
$0.121
10k+ parts
-
Arrow
$0.088
Verical
Farnell
$0.179
$0.104
Element14
$0.205
$0.124
$0.119
Chip1Stop
$0.109
$0.086
TTI Europe
$0.092
RS (Exports)
$0.116
Newark
$0.181
$0.122
Nova Conductors
$0.141
Maritex
$0.158
TME
$0.420
$0.194
$0.132
Chip Stock
IBS Electronics
$0.156
Vyrian
VNN
Bristol Electronics
Elcom Components
Prism Electronics
ComSIT Distribution GmbH
Netroflash
$0.139
Argo Parts USA
$0.137
Continental Prestige Electronics
$0.171
$0.118
$0.090
$0.080
Advanced Electronics
$1.093
$0.995
$0.896
Corohmni
$2.413
Eastek
$0.100
Abacus Technologies
iodParts Technologies Inc.
GreenTree Electronics
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$2.194
$2.149
Akira Global LLC
Having 2 terminals allows for a secure and stable connection.
Ferrite chip filters are effective in reducing electromagnetic interference, making this product suitable for noise-sensitive applications.
With a high maximum operating temperature, this data line filter can withstand heat without compromising performance.
The wide range of minimum operating temperature ensures that this product is suitable for various environments, including cold settings.
Tin terminal finish provides good conductivity and corrosion resistance, enhancing the durability of the filter.
The compact width makes this filter suitable for applications where space is limited.
Low DC resistance helps in minimizing power loss and ensuring efficient filtering.
The output impedance of 120 ohm is ideal for maintaining signal integrity and reducing reflections in the line.
The embossed packing method allows for easy handling and storage of the filters, ensuring they remain protected during transport.
Surface mounting type facilitates easy installation on PCBs, making the integration of these filters seamless.
With a rated current of 4 A, this filter can handle high current loads without overheating or compromising performance.
The low profile height of 1.6 mm allows for flexible placement and integration of the filter in compact electronic devices.
Data Line Filters BLM31KN121SN1L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Current:
Terminal Finish:
Width (mm):
BLM31KN121SN1L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
RC0402FR-0710KL
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
EU2B-YS3303C
Idec
ROTARY SWITCH;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ACF451832-333-TD01
TDK
ACF451832-333-TD01 by TDK is a data line filter with 1 function and a rated voltage of 50V. It has a min insulation resistance of 1000 Mohm and can be used for applications requiring attenuation at max frequency of 25 dB, such as in electronic devices or communication systems.
NFM21CC222R1H3D
Murata Manufacturing
Murata Manufacturing's NFM21CC222R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 2200uF capacitance. It is a feed through capacitor used in applications requiring surface mount filters for noise suppression.
MI0805K601R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.5 A;
1250F-003
Api Technologies
DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; JESD-609 Code: e4; Additional Features: PI-TYPE CIRCUIT; Minimum Operating Temperature: -55 Cel;
BLM15PX471SN1D
Murata Manufacturing's BLM15PX471SN1D is a FERRITE CHIP data line filter with 470 OHM output impedance, 0.2 ohm max DC resistance, and 0.6 A rated current. It operates b/w -55 to 125 °C and is ideal for surface mount applications in various electronic devices.
FLTR100V10Z
Ge Industrial Solutions
DATA LINE FILTER MODULE; Maximum DC Resistance: .014 ohm; Rated Current: 10 A; No. of Functions: 1; Height: 11.7 mm; Width (mm): 27.9;
FBMJ3216HS800-T8
Taiyo Yuden
Taiyo Yuden's FBMJ3216HS800-T8 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 80 ohms, operates b/w -40°C to 125°C, and has a compact size of 3.2mm x 1.6mm x 1.1mm. Ideal for surface mount applications requiring effective noise suppression in data lines.
NFM41CC222R2A3L
Murata's NFM41CC222R2A3L is a data line filter with 100V rated voltage, 2200uF capacitance, and -55 to 125°C operating temperature range. It features FEED THROUGH CAPACITOR type and is ideal for applications requiring high insulation resistance and surface mounting type.
BLM31AJ601SN1L
BLM31AJ601SN1L by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter measures L3.2XB1.6XH1.1 (mm) and is commonly used for impedance matching in electronic circuits.
744273501
Wuerth Elektronik & Kg
Wurth Elektronik 744273501 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 5uH. It operates b/w -40°C to 125°C, has Tin/Copper terminals, and dimensions of L9.5xB8.3xH5.3mm. Ideal for applications requiring a max current of 5A and output impedance of 500Ω in surface mount configurations.
74279277
Wurth Elektronik 74279277 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 mm and output impedance of 70 OHM. Rated current is 0.5 A, making it ideal for surface mount installations in the frequency range of 100-500 MHz.
MQPI-18LP-01
Vicor
Vicor's MQPI-18LP-01 is a 28V data line filter with 10 terminals, rated for 7A current. With a temperature range of -55 to 125°C, it offers an output impedance of 50Ω. Ideal for surface mount applications, this compact filter measures L24.867xB12.421xH3.353mm and is suitable for various electronic devices requiring noise suppression in data lines.
MMZ2012Y202BT
The TDK MMZ2012Y202BT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.5 ohm and output impedance of 2000 ohm, making it ideal for surface mount applications requiring effective filtering in electronic circuits.
ILHB1206ER121V
Vishay Intertechnology
Vishay Intertechnology's ILHB1206ER121V is a 120 OHM FERRITE CHIP filter with 2 terminals, rated for 6A current. Ideal for data line filtering applications, it operates b/w -55 to 125 °C and has a DC resistance of 0.02 ohm. Measuring L3.2XB1.6XH1.1 (mm), it is designed for surface mount installation at frequencies up to 100 MHz.
NFL21SP107X1C3D
Murata Manufacturing's NFL21SP107X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.135 uH inductance and 44 uF capacitance, it operates b/w -55 to 125 °C. Ideal for surface mount applications, this filter has three terminals and is packed in tape format.
BLM18SG331TN1D
BLM18SG331TN1D by Murata is a chip bead data line filter with 2 terminals, rated for 1A current. It operates b/w -55°C to 125°C, offering an output impedance of 330 ohm at frequencies ranging from 100 MHz. This ferrite chip filter in a 0603 case is ideal for surface mount applications in various electronic devices.
MPZ2012S601AT000
TDK's MPZ2012S601AT000 is an 0805 chip bead filter with a ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for data line filtering applications due to its compact size and high rated current of 2 A.
P0469NLT
Pulse Electronics
P0469NLT by Pulse Electronics is a DATA LINE FILTER with 2 functions, inductance of 630uH, and max operating temp of 120°C. Ideal for automotive applications due to AEC-Q200 screening level, rated current of 11.6A, and compact dimensions of L30.99xB25.4xH12.7mm.
PBY201209T-601Y-N
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
BLA31AG601SN4D
Murata Manufacturing's BLA31AG601SN4D is a Ferrite Chip Data Line Filter with 4 functions and 8 terminals. It has a max operating temperature of 125°C, DC resistance of 0.35 ohm, and output impedance of 600 ohm. Ideal for surface mount applications in electronics to reduce electromagnetic interference.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM31PG601SN1L
BLM31PG601SN1L by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L3.2xB1.6xH1.1 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.
BLM31PG121SN1L
Murata Manufacturing's BLM31PG121SN1L is a chip bead data line filter with 2 terminals, rated for 3A current. It offers 120 OHM output impedance, -55 to 125 °C operating temperature range, and 0.025 ohm DC resistance. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM31PG500SN1L
Murata Manufacturing's BLM31PG500SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.025 ohm. Ideal for applications requiring a 50 OHM output impedance, this ferrite chip filter is designed for surface mount installation in various electronic devices.
BLM31AF700SN1L
Murata Manufacturing's BLM31AF700SN1L is a Ferrite Chip Data Line Filter with 2 terminals, 70 Ohm output impedance, and 0.15 ohm max DC resistance. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronic devices requiring noise suppression.
BLM31PG330SN1L
Murata Manufacturing's BLM31PG330SN1L is a chip bead data line filter with 2 terminals, rated for 6A current. With dimensions of L3.2xB1.6xH1.1 mm, it offers an output impedance of 33 ohm and operates b/w -55 to 125°C. Ideal for surface mount applications in filtering frequencies from 100 MHz with a max DC resistance of 0.01 ohm.
BLM31SN500SN1L
Murata Manufacturing's BLM31SN500SN1L is a FERRITE CHIP filter with 2 terminals, rated for 10A current. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55 to 125 °C and has a max DC resistance of 0.0021 ohm. Ideal for data line filtering applications due to its 50 OHM output impedance and surface mounting type.
BLM31PG391SN1L
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .05 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
BLM31PG601SN1D
BLM31PG601SN1D by Murata is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600 OHM output impedance. Operating b/w -55 to 125 °C, it's ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 (mm) dimensions and low DC resistance of 0.09 ohm.
BLM31PG601SN1
Murata Manufacturing's BLM31PG601SN1 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600Ω output impedance. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55°C to 125°C, ideal for data line filtering in surface mount applications.
BLM31PG601SN1K
BLM31PG601SN1K by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. This ferrite chip filter comes in a compact 1206 case size for surface mounting method.
BLM31PG601SN1B
Murata Manufacturing's BLM31PG601SN1B is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in the frequency range of 100 MHz.
BLM31SN500SH1L
FERRITE CHIP; Maximum DC Resistance: .0016 ohm; Rated Current: 12 A; No. of Terminals: 2; Packing Method: TR, EMBOSSED, 7 INCH; No. of Functions: 1;
BLM31SN500SZ1L
FERRITE CHIP; Maximum DC Resistance: .0016 ohm; Rated Current: 12 A; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch); Minimum Operating Temperature: -55 Cel; No. of Terminals: 2;
BLM31AJ260SN1L
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: .5 A; No. of Terminals: 2; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch); Height: 1.1 mm;
BLM31PG121SN1B
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .025 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
BLM31PG121SH1L
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .02 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
BLM32A07PT
FERRITE CHIP; Maximum DC Resistance: 1 ohm; Rated Current: .2 A; No. of Functions: 1; Height: 1.1 mm; Mounting Type: SURFACE MOUNT;
BLM31PG391SN1B
BLM31KN102SN1L
FERRITE CHIP; Maximum DC Resistance: .075 ohm; Rated Current: 1.4 A; Maximum Operating Temperature: 125 Cel; No. of Functions: 1; No. of Terminals: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved