Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's 78253/55JVC-R is a SMPS transformer with dimensions 6.35mm x 9mm x 12.7mm for surface mount applications. It offers efficient power conversion, suitable for various electronic devices requiring compact transformers in power supplies.
Median Price
$4.220
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Element14
1+ parts
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$4.770
$3.882
$3.723
Mouser Electronics
$3.780
$3.250
Newark
$5.220
$4.330
Avnet
$2.738
$2.697
TTI
$2.820
$2.710
Farnell
$2.880
$2.670
Nova Conductors
$3.090
VNN
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Netroflash
Authorized Procurement Solutions
Robosynatics
$2.087
$1.933
Lucentia Tech
Allows for easy transportation and storage, making it convenient for manufacturers.
Compact size saves space in electronic devices, ideal for smaller designs.
Slim profile allows for versatile installation options, suitable for various applications.
Specifically designed for switch mode power supplies, ensuring efficient energy conversion.
Enables easy installation on circuit boards, simplifying the assembly process.
Optimal length for accommodating different components in tight spaces, offering flexibility in design.
SMPS Transformers 78253/55JVC-R attributes and parameters. Explore more SMPS Transformers devices from Murata Manufacturing
Height:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Packing Method:
Transformer Type:
Width:
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
M39029/56-351
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PLA51LA32
Vishay Intertechnology
Vishay Intertechnology's PLA51LA32 is a 2000W SMPS Transformer with primary inductance of 128uH. Ideal for applications requiring output voltage of 30V, it operates b/w -55°C to 125°C. With dimensions of 22x53x70mm, it is designed for chassis mounting and supports frequencies up to 100KHz.
CTX02-14659
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L10.0XB12.0XH6.2 (mm); Inductance (Primary): 547 uH; No. of Winding (Secondary): 2; No. of Winding (Primary): 1;
PA0491NLT
Pulse Electronics
PA0491NLT by Pulse Electronics is a 100W SMPS Transformer with primary inductance of 140uH. It operates b/w -40°C to 125°C, suitable for applications requiring an output voltage of 5V. With dimensions L23.37xB20.07xH8.6 mm, it is designed for surface mounting method and has a frequency range of 200KHz to 700KHz.
78250JC
Murata Manufacturing
Murata Manufacturing's 78250JC is a SMPS Transformer with dimensions of 6.35mm x 9mm x 12.7mm, suitable for surface mount applications. It offers efficient power conversion in compact spaces, making it ideal for various electronic devices requiring high-performance transformers.
FL2015-5LB
Coilcraft
Coilcraft FL2015-5LB is a 6W SMPS transformer with primary inductance of 20uH. Operating at -40 to 85°C, it outputs 1600V at max input voltage of 12V. Ideal for surface mount applications up to 100 KHz frequency.
YA9036-ALD
Coilcraft's YA9036-ALD is a 6W SMPS transformer with primary inductance of 24uH. It has 2 secondary windings, operates b/w -40 to 85°C, and outputs 24V. Ideal for surface mount applications in power supplies with input voltage range of 4-65V.
GA3372-ALD
Coilcraft's GA3372-ALD is a 13W SMPS transformer with primary inductance of 102uH. It has two secondary windings, outputting 5V each. Ideal for surface mount applications in power supplies, it operates b/w -40°C to 85°C and supports input voltages from 36V to 72V.
POE51Q-48ED
Coilcraft's POE51Q-48ED is a 51W SMPS Transformer with 22.2uH primary inductance, AEC-Q200 approval, and 48V output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact dimensions of 14x13x14.5mm for surface mount installation.
HA3803-BLD
Coilcraft's HA3803-BLD is a 10W SMPS transformer with primary inductance of 166.5uH, suitable for applications requiring 12V output voltage. With TR packing and dimensions L17.2xB14.98xH8.626 (mm), it operates b/w -40 to 125 °C, ideal for surface mounting in compact electronic devices.
750313970
Wuerth Elektronik & Kg
750313970 by Wurth Elektronik is a SMPS Transformer with inductance of 40uH. It has approvals from IEC and operates b/w -40 to 125°C. With output voltages of 3.3V, it is ideal for applications requiring a min input voltage of 18V and operating frequency range of 200-300 KHz.
PH9185.011NL
PH9185.011NL by Pulse Electronics is a 3W SMPS Transformer with primary inductance of 750uH. It operates b/w -40 to 125°C, suitable for surface mount applications due to its compact size (13x10x12.5mm).
PA5100.005NLT
PA5100.005NLT by Pulse Electronics is a 27W SMPS Transformer with 2 primary windings at 11uH inductance. It operates b/w -40 to 125 °C and outputs 5V, suitable for surface mount applications up to 200 KHz frequency.
74032
Power Integrations
74032 by Power Integrations is a 25W SMPS Transformer with primary inductance of 1100uH. It offers an output voltage of 24V and can handle input voltages ranging from 90V to 120V. Ideal for applications requiring efficient power conversion in compact spaces.
PE-68414NL
PE-68414NL by Pulse Electronics is a SMPS transformer with 65uH primary inductance, 0.63A output current, and -12V/12V dual output voltage. Ideal for POWER applications, it operates b/w -40°C to 130°C temperatures and has a 1:1.2:1.2 turns ratio for efficient performance.
POE26W3.3VS5-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: POE26W3.3VS5-R; Packing Method: REEL; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; TURNS RATIO: 1:0.29:0.29:0.83:0.42; Length: 21.5 mm;
PH0259NL
PH0259NL by Pulse Electronics is a SMPS transformer with primary inductance of 1800 uH. It operates b/w -40 to 125 °C and outputs 24 V. Ideal for applications requiring THROUGH HOLE MOUNTED transformers due to its compact size (18x16x18.3 mm).
76253/55ENC
Murata Manufacturing's 76253/55ENC is a SMPS transformer with dimensions of 15mm x 12.5mm x 15mm. It features matte tin terminal finish and through-hole mounting, suitable for power supply applications.
MA5519-AL
MA5519-AL by Coilcraft is a SMPS transformer with a power rating of 720W. It has one primary winding with an inductance of 190.8uH and a secondary winding for an output voltage of 12V. This transformer is commonly used in applications such as surface mount power supplies.
ZB1051-AED
Coilcraft's ZB1051-AED is a 10W SMPS transformer with 2 primary windings at 14uH. It operates b/w -40°C to 85°C, suitable for AEC-Q200 approved applications like power supplies and converters. Dimensions are 13.21mm x 10.92mm x 10mm, supporting up to 42V input voltage and outputting at 5V with a max frequency of 300KHz.
PH0256NL
PH0256NL by Pulse Electronics is a SMPS transformer with 3 primary windings, 2800uH inductance, and max operating temp of 125°C. Ideal for applications requiring a 5V output voltage, it has a min operating temp of -40°C and dimensions of 14.5mm x 16.5mm x 19mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
78253/55MVC
Murata Manufacturing's 78253/55MVC is a 1W SMPS Transformer with primary inductance of 600uH. It operates b/w -40 to 85°C, outputting 5V at a frequency of up to 500KHz. Ideal for surface mount applications requiring compact dimensions and reliable power conversion.
78253/55VC
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Height: 6.35 mm; Nominal Input Voltage (V): 5; Inductance (Primary): 190 uH; No. of Winding (Secondary): 1;
78253/55C
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Height: 6.35 mm; Power Rating: 1 W; Width: 9 mm; Maximum Operating Temperature: 85 Cel;
78253/55MC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Bright Tin (Sn); JESD-609 Code: e3; Maximum Operating Frequency: 500 KHz; No. of Winding (Primary): 1;
78253/35MC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Winding (Secondary): 1; Packing Method: TUBE; Inductance (Primary): 300 uH;
78253/55MVC-R
Murata Manufacturing's 78253/55MVC-R is a 1W SMPS Transformer with primary inductance of 600uH. It operates b/w -40 to 85°C, outputs 5V, and has a max frequency of 500KHz. Ideal for surface mount applications in power supplies.
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TUBE; No. of Winding (Secondary): 1; No. of Winding (Primary): 1; Height: 6.35 mm;
78253/55JC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; No. of Winding (Primary): 1; Height: 6.35 mm; Length: 12.7 mm;
78250JC-R
Murata Manufacturing's 78250JC-R is a SMPS transformer with dimensions of 6.35mm x 9mm x 12.7mm, designed for surface mount applications. It offers efficient power conversion and is ideal for compact electronic devices requiring high-performance transformers.
78250JVC-R
Murata Manufacturing's 78250JVC-R is a SMPS transformer with dimensions of 6.35mm x 9mm x 12.7mm for surface mount applications. It offers efficient power conversion, making it ideal for compact electronic devices requiring high-performance transformers in power supplies.
78250VC
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Width: 9 mm; No. of Winding (Primary): 1; Height: 6.35 mm;
78253/35JC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 6.35 mm; Packing Method: TR; Width: 9 mm; No. of Winding (Primary): 1;
78253/55MC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; No. of Winding (Secondary): 1; Width: 9 mm; Height: 6.35 mm;
78253/35MVC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Bright Tin (Sn); Inductance (Primary): 300 uH; Maximum Operating Temperature: 85 Cel; Height: 6.35 mm;
78253/55JC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Height: 6.35 mm; No. of Winding (Secondary): 1; JESD-609 Code: e3;
78253/55JVC
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 12.7 mm; Packing Method: TUBE; No. of Winding (Secondary): 1; Height: 6.35 mm;
Murata Power Solutions
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Output Voltage-1: 5 V; No. of Winding (Secondary): 1; Packing Method: TR, 15 INCH;
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Height: 6.35 mm; Length: 9.52 mm; No. of Winding (Secondary): 1;
78253/55JVC-R
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Winding (Secondary): 1; No. of Winding (Primary): 1; Length: 9.52 mm;
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Power Rating: 1 W; Packing Method: TUBE; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved