Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 982660349 is a UL-approved flat cable with tin finish copper alloy conductor. It has a rated voltage of 60V, resistance of 0.73 ohm, and can handle temperatures from -40 to 105 °C. Ideal for applications requiring a 0.03 mm2 cross section area and 0.5A rated current in electrical wiring setups.
Median Price
$4.100
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Verical
1+ parts
$4.120
100+ parts
$4.050
1k+ parts
$3.980
10k+ parts
-
Newark
$4.370
DigiKey
$3.940
Chip1Stop
$4.180
$3.870
Master Electronics
$4.080
$4.010
Powell Electronics
$4.000
Farnell
Digiode
$3.648
Nova Conductors
$3.660
TestEquity
$4.400
Vyrian
VNN
IBS Electronics
$3.975
TME
Semicontronic
$3.220
$3.140
$3.123
Corphita
$3.456
Aranea Global
$3.587
$3.443
Continental Prestige Electronics
Argo Parts USA
Andel Nordic
$18.570
$12.997
Assy Fe
Having UL approval ensures that the product meets safety and quality standards, giving users peace of mind when using the electrical wires and cables.
Suitable for low voltage applications, making it ideal for use in various electronic devices and circuits.
Polyester insulation provides good electrical properties and resistance to heat, ensuring stable performance in different environments.
With a high maximum operating temperature, this product can withstand elevated temperatures without compromising its performance or safety.
Copper alloy conductors offer excellent conductivity and durability, making the electrical wires and cables efficient in transmitting electrical signals.
Electrical Wires & Cables 982660349 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
982660349 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN-2803A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Loras Industries
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Silicon Standard
Wuxi Xuyang Electronic
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
5479CSL002
Alpha Wire
Alpha Wire 5479CSL002 is a 24 AWG stranded cable with PVC jacket, shielding, and tin finish. Rated for 300V, it's ideal for communication/control applications with 18 conductors and operating temperatures from -20 to 80°C.
93900601000
Belden
WIRE AND CABLE;
M27500-22SB2T23
TE Connectivity
TE Connectivity's M27500-22SB2T23 is a 600V electrical wire with a tin conductor finish and modified radiation cross-linked ETFE polymer insulation. It has a max operating temperature of 150°C and can withstand temperatures as low as -65°C. This flexible cord and fixture wire, approved by MIL-DTL-27500, is commonly used in applications requiring a 22 AWG wire size, such as aerospace and military industries.
3580/9SL005
P569-003
Tripp Lite
CABLE ASSEMBLY;
4160700
Lapp Group Pvt
4160700 by Lapp Group Pvt is a stranded wire with approvals from CE, CSA, HAR, and UL. Featuring tinned copper conductor material, it has a rated voltage of 600V and can operate b/w -40 to 105°C. Ideal for cabling applications, this flexible cord has a wire gauge of 10 AWG and a cross-section area of 6mm².
P137-06N-VGA
CAU3AA-2M
L-com
P005-006
Tripp Lite P005-006 power cable, rated 250V, 15A, with IEC-320-C14 to IEC-320-C13 connectors. Ideal for PC, monitor, server, PDU, and UPS applications. Operating temperature range: -20°C to 60°C.
TTL-232R-3V3
FTDI
TTL-232R-3V3 by FTDI is a 24 AWG communication cable with USB to UART connectors. It has UL approval, operates b/w -40°C to 85°C, and features a 5mm diameter. Ideal for connecting devices requiring reliable data transmission in various applications.
1655WH005
TTL-232R-5V-WE
FTDI's TTL-232R-5V-WE is a 6-conductor communication cable with CE and UL approvals. It operates b/w -40°C to 85°C, suitable for instrumentation and control applications. Featuring 24 AWG wire gauge and 5mm diameter, it ensures reliable connectivity in various electrical setups.
151670313
Molex
Molex 151670313 is a UL-approved flat cable with 16 copper alloy conductors, rated for 60V and 0.5A. Constructed with tin finish and polyester insulator, it operates b/w -40 to 105 °C. Ideal for electrical wiring applications requiring flexibility and durability in various industries.
44A0111-22-91
TE Connectivity's 44A0111-22-91 is a 600V rated wire with TIN finish, suitable for applications requiring flexibility. With a conductor made of copper alloy and operating temperatures ranging from -65°C to 150°C, it is ideal for use in fixtures and cords. The wire has a diameter of 1.19mm, stranding of 19X34, and is categorized under SPEC 44 cables.
12512
Helukabel
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Wire & Cable Name: CONTROL CABLE; Application: MACHINE TOOLS, CONTROL SYSTEMS, CONNECTION BETWEEN CONTROL; DIN Conformity: NO;
135101-02-M0.25
Amphenol
3365/20
3m Electronic Products Division
The 3m Electronic Products Division 3365/20 is a UL-approved FLAT FLEXIBLE CABLE with 20 conductors of TINNED COPPER. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20 to 105°C. Ideal for applications requiring flexibility and durability in electrical wiring setups.
M17/60-RG142
Elspec
WIRE AND CABLE; Rated Voltage: 1900 V; Shielding: YES; Maximum Operating Temperature: 200 Cel; Conductor Finish: SILVER; Approvals (V): MIL;
M22759/11-22-9
Carlisle Interconnect Technologies
M22759/11-22-9 by Carlisle IT is a MIL-approved stranded wire with silver finish, PTFE insulation, and copper conductor. It operates b/w -55 to 200 °C, with 22 AWG and resistance of 0.0495 ohm. Ideal for applications requiring smoke emission control, overload stability, and flammability resistance.
CAB.011
Taoglas
Taoglas CAB.011 cable features stranded construction with FEP jacket and shielding, rated for 30V. Ideal for applications requiring high temperature resistance up to 105°C, it has a copper conductor finished in silver, UL approval, and connectors IPEX MHFI to SMA(F).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
982670233
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 8;
982661034
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Conductor Material: COPPER ALLOY; MIL Conformity: NO;
982661014
Molex 982661014 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a max operating temperature of 105°C and min of -40°C, this 0.03 mm2 cross-section cable has 31 conductors and is ideal for low current (0.5A) electrical wiring needs.
982670387
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 22;
982670431
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 26;
982661009
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; IEC Conformity: NO; Cross Section Area: .03 mm2;
982660193
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; Construction: FLAT;
982670409
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 24;
982660061
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; DIN Conformity: NO; Wire & Cable Name: FLAT CABLE;
982670255
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 10;
982660404
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Construction: FLAT; Resistance: .73 ohm;
982670277
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 12;
982660989
Molex 982660989 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor. Polyester insulator withstands -40 to 105 °C. Ideal for applications requiring 0.03 mm2 cross section area, 0.73 ohm resistance, and 0.5A rated current in electrical wiring setups.
982670321
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 16;
982661013
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Insulator Material: POLYESTER;
982660343
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; No. of Conductors: 32; Minimum Operating Temperature: -40 Cel;
982661025
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; No. of Conductors: 31; Approvals (V): UL;
982660051
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; DIN Conformity: NO; Conductor Finish: TIN;
982661033
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; MIL Conformity: NO; Minimum Operating Temperature: -40 Cel;
982660325
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved