Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 982660051 is a UL approved flat cable with 6 conductors, made of tin-finished copper alloy. It has a rated voltage of 60V, resistance of 0.73 ohm, and can handle temperatures from -40 to 105 °C. Ideal for electrical wiring applications requiring a compact design and reliable performance.
Median Price
$2.406
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.830
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$2.290
$1.660
$1.480
Element14
$2.521
$1.917
DigiKey
$2.660
$1.873
$1.479
Verical
Nova Conductors
$1.649
Digiode
$1.738
VNN
Vyrian
Semicontronic
$1.190
$1.160
$1.154
Corphita
$1.647
Continental Prestige Electronics
$1.616
Argo Parts USA
Netroflash
$1.567
$1.534
Aztec Data Supply Inc.
$2.703
Andel Nordic
$41.730
$29.211
Having UL approval ensures that this product meets the necessary safety standards and regulations.
The flat construction of this cable makes it easy to install and manage, especially in tight spaces.
With a rated voltage of 60V, this cable is suitable for low voltage applications, such as small electronics and appliances.
The tin finish on the conductor enhances its conductivity and durability, ensuring a reliable electrical connection.
The polyester insulation provides good protection against heat and chemicals, making the cable suitable for a wide range of environments.
The high maximum operating temperature allows this cable to be used in various applications without the risk of overheating.
The low minimum operating temperature ensures that this cable remains functional even in extreme cold conditions.
A smaller wire gauge indicates a thicker conductor, which can handle higher currents and reduce power loss.
Copper alloy conductors offer a good balance of conductivity and strength, making the cable reliable and long-lasting.
The low resistance of this cable helps minimize power loss and ensures efficient energy transfer.
With a rated current of 0.5A, this cable is suitable for low power applications that do not require high currents.
Having 6 conductors allows for more complex wiring configurations, making this cable versatile and suitable for various applications.
The flat cable design is space-saving and easy to route, making it ideal for applications where neatness and organization are important.
Electrical Wires & Cables 982660051 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
982660051 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
Nte Electronics
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Telefunken Microelectronics
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
FDLL4148
Fairchild Semiconductor
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
3365/09-100SF
3m Electronic Products Division
3m Electronic Products Division's 3365/09-100SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and rated at 300V. It is UL and CUL approved, suitable for electrical applications requiring flexibility in confined spaces due to its construction and length of 30.48mm.
34440010250
Belden
Wires and Cables;
5010/25CSL005
Alpha Wire
The Alpha Wire 5010/25CSL005 is a stranded wire with PVC jacket, rated for 300V. Featuring 25 conductors of copper alloy, it has a temperature range of -35 to 105°C. Ideal for flexible cord and fixture wire applications, approved by CE, CSA, IEC, and UL.
P005-006
Tripp Lite
Tripp Lite P005-006 power cable, rated 250V, 15A, with IEC-320-C14 to IEC-320-C13 connectors. Ideal for PC, monitor, server, PDU, and UPS applications. Operating temperature range: -20°C to 60°C.
M81044/12-22-9
TE Connectivity
TE Connectivity's M81044/12-22-9 is a 600V stranded wire with tin finish, suitable for general purpose applications. Featuring a conductor made of copper alloy, it has a temperature range from -65 to 150°C and a diameter of 1.19mm. This MIL-DTL-81044 cable type is flexible and lightweight, ideal for various electrical projects.
34130
Helukabel
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Conductor Material: BARE COPPER; Wire & Cable Name: COMMUNICATION CABLE; Diameter: 11 mm;
M22759/34-20-9
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; No. of Conductors: 1; Maximum Operating Temperature: 150 Cel;
45306
CABLE ASSEMBLY; Connector Side-1: DB9 MALE; Connector Side-2: DB9 FEMALE; Shielding: NO; No. of Conductors: 9; Wire Gauge (AWG): 28;
151661014
Molex
Molex 151661014 flat cable with UL approval, rated for 60V, features 31 conductors of tin-finished copper alloy. With a max operating temp of 105°C and -40°C min, it's ideal for electrical wiring applications requiring flexibility and durability in various environments.
XS2W-D421-G81-SA
Omron
CABLE ASSEMBLY;
USB-RS485-WE-5000-BT
FTDI
FTDI USB-RS485-WE-5000-BT cable has 6 conductors, rated voltage of 5V, and a max operating temp of 85°C. Ideal for input/output applications, it is a communication cable with USB connector and TIN finish, suitable for various electrical setups.
5010/15CSL002
C3365/20
C3365/20 by 3M Electronic Products Division is a flat flexible cable with 20 conductors, rated at 300V. Featuring tinned copper conductor material and PVC insulation, it operates b/w -20°C to 105°C. Approved by CUL and UL, it is ideal for electrical wiring applications requiring flexibility and durability.
3365/40-300SF
3m Electronic Products Division's 3365/40-300SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and rated at 300V. Approved by CUL and UL, it's ideal for electrical applications requiring flexibility and durability in confined spaces.
FZTSPXNXNSNF020
Panduit
The Panduit FZTSPXNXNSNF020 is an ISO/IEC and TIA approved communication cable with LC cassette connectors on both sides. It has 12 conductors, a diameter of 10mm, and operates b/w -20°C to 70°C. Ideal for SAN applications due to its reliability and performance in various environments.
3625/14SF
3625/14SF by 3m Electronic Products Division is a UL approved stranded electrical wire with a rated voltage of 300V. It features a polyvinyl chloride insulator, can operate in temperatures ranging from -20 to 105 °C, and has 14 conductors. This flat flexible cable is ideal for various wire and cable applications.
87610601000
Belden 87610601000 is a UL-approved flexible cord with 2 conductors, tinned copper construction, and PVC jacket. It has a rated voltage of 300V, suitable for applications requiring a temperature range of -20 to 60°C. With a wire gauge of 22 AWG and stranding of 7x30, it is ideal for electrical wiring in various settings.
CS-DSSMDB9MF0-005
Amphenol
RJF22G03100BTX
Amphenol RJF22G03100BTX is an IEC-approved communication cable with 8 conductors, RJ45 connector, and 0.3mm length. Ideal for robotics and industrial process control applications, it operates b/w -40°C to 85°C temperature range.
55A0111-26-90
TE Connectivity's 55A0111-26-90 wire is stranded with tin finish, rated for 600V. With a conductor made of copper alloy, it operates b/w -65 to 150 °C and has a diameter of 0.81mm. Ideal for general purpose and lightweight applications, this flexible cord and fixture wire is commonly used in SPEC 55 cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
982670233
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 8;
982661034
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Conductor Material: COPPER ALLOY; MIL Conformity: NO;
982661014
Molex 982661014 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a max operating temperature of 105°C and min of -40°C, this 0.03 mm2 cross-section cable has 31 conductors and is ideal for low current (0.5A) electrical wiring needs.
982670387
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 22;
982670431
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 26;
982661009
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; IEC Conformity: NO; Cross Section Area: .03 mm2;
982660193
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; Construction: FLAT;
982670409
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 24;
982660061
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; DIN Conformity: NO; Wire & Cable Name: FLAT CABLE;
982670255
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 10;
982660404
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Construction: FLAT; Resistance: .73 ohm;
982670277
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 12;
982660989
Molex 982660989 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor. Polyester insulator withstands -40 to 105 °C. Ideal for applications requiring 0.03 mm2 cross section area, 0.73 ohm resistance, and 0.5A rated current in electrical wiring setups.
982670321
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 16;
982661013
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Insulator Material: POLYESTER;
982660343
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; No. of Conductors: 32; Minimum Operating Temperature: -40 Cel;
982661025
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; No. of Conductors: 31; Approvals (V): UL;
982660349
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Resistance: .73 ohm; DIN Conformity: NO;
982661033
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; MIL Conformity: NO; Minimum Operating Temperature: -40 Cel;
982660074
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Cross Section Area: .03 mm2; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved