Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 982660061 flat cable with UL approval, rated for 60V and conductor made of tin-coated copper alloy. Ideal for applications requiring a temperature range from -40 to 105 °C, featuring 6 conductors with a cross-section area of 0.03 mm2.
Median Price
$3.576
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$2.613
100+ parts
$2.191
1k+ parts
$1.969
10k+ parts
-
Farnell
$2.800
$2.390
$2.210
Mouser Electronics
$4.140
$3.000
$2.680
Element14
$4.230
$4.060
$3.830
DigiKey
$4.280
$2.999
$2.485
Newark
$5.490
$4.330
Verical
$3.186
Powell Electronics
$2.510
$2.330
Chip1Stop
$3.350
$2.910
Nova Conductors
$2.408
Digiode
$2.482
TestEquity
$3.010
TME
$3.920
$3.050
VNN
IBS Electronics
$2.791
$2.609
$2.230
Vyrian
Cyclops Electronics Ltd
Corphita
$2.352
Argo Parts USA
Continental Prestige Electronics
$2.360
Netroflash
Semicontronic
$4.830
$4.709
$4.685
Aztec Data Supply Inc.
$5.647
Andel Nordic
$35.870
$25.110
Perfect Parts
Assy Fe
Having UL approval ensures that the product has met safety and quality standards set by Underwriters Laboratories, making it a reliable choice.
The high rated voltage of 60V allows for safe and efficient power transmission in various electrical applications.
The tin finish on the conductor helps improve conductivity and corrosion resistance, ensuring long-lasting performance.
Polyester insulator material provides excellent insulation properties, protecting the cable from external factors and ensuring safety.
With a high maximum operating temperature of 105°C, this cable can withstand elevated temperatures without compromising performance.
The low minimum operating temperature of -40°C allows this cable to be used in cold environments without risk of damage.
The small wire gauge of 32 ensures flexibility and easy installation in tight spaces or complex configurations.
Copper alloy conductors offer high conductivity and strength, ensuring efficient power transmission and durability.
The rated current of 0.5A indicates the maximum current the cable can safely carry, making it suitable for low-power applications.
Having 6 conductors allows for multiple signals or power sources to be transmitted through a single cable, reducing clutter and simplifying installation.
The flat cable design is space-saving and easy to route, making it ideal for applications where traditional round cables may be bulky or obtrusive.
Electrical Wires & Cables 982660061 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
982660061 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Nexperia
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
ROHM
UC-20AMM-QA8A01
Amphenol UC-20AMM-QA8A01 cable features UL approval, PVC jacket, and shielding. With USB C to USB A connectors, 24 AWG wire gauge, and 4 conductors, it's ideal for data transfer in various electrical applications.
34138
Helukabel
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Maximum Operating Temperature: 70 Cel; Conductor Material: BARE COPPER; Approvals (V): CE; DIN; VDE;
1099
Adafruit Industries
CABLE ASSEMBLY; Connector Side-1: MICRO USB B MALE; Connector Side-2: MICRO USB-A FEM.; Shielding: NO;
221612
Lapp Group Pvt
221612 by Lapp Group Pvt is a stranded wire with PVC jacket, rated at 600V. Ideal for industrial and automotive plants, tray wiring applications. Features include 16 AWG bare copper conductor, flexible cord type, and operating temperatures from -25 to 90 °C.
3365/16-300SF
3m Electronic Products Division
3m Electronic Products Division's 3365/16-300SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V, it has a wire gauge of 28 AWG and length of 91.44mm. Ideal for electrical applications requiring flexibility and durability in confined spaces.
7000-88081-0100030
Murrelektronik
CABLE ASSEMBLY;
M17/113-RG316
Carlisle Interconnect Technologies
WIRE AND CABLE; Shielding: YES; Construction: STRANDED; Wire Gauge (AWG): 25; Wire & Cable Name: COMMUNICATION CABLE; Insulator Material: PTFE;
175101-10-M0.75
P004-010
Tripp Lite
8916189100
Belden
Belden 8916189100 is a stranded communication cable with tinned copper conductor, rated for 600V and 39A. Featuring approvals from CE, CSA, and UL, it has a temperature range of -30 to 105°C. Ideal for electrical wiring applications requiring reliable performance in various environments.
M22759/11-22-5
Specialty Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Operating Temperature: 200 Cel; Construction: STRANDED; Diameter: 1.24 mm;
35108BK199
Alpha Wire
Alpha Wire 35108BK199 is a stranded wire with polyethylene jacket, shielding, and tin finish. Rated for 300V, it has PVC insulation and operates b/w -30 to 80°C. Ideal for flexible cords and fixtures due to its copper alloy conductor, 0.326 mm2 area, and 7X30 stranding.
FFSD-05-D-02.00-01-N
Samtec
FFSD-05-D-02.00-01-N by Samtec is a UL approved stranded flat cable with tin conductor finish and PVC insulation. It operates b/w -40 to 105°C, has 10 conductors, each with a cross-section area of 0.0509 mm2. Ideal for high reliability applications requiring a rated current of 2.3A.
U050-003
CABLE ASSEMBLY; Connector Side-1: USB 2.0 A MALE; Connector Side-2: MICRO USB B MALE; Shielding: NO; DIN Conformity: NO; MIL Conformity: NO;
CO-174BNCRBNC-001
TTL-232R-3V3
FTDI
TTL-232R-3V3 by FTDI is a 24 AWG communication cable with USB to UART connectors. It has UL approval, operates b/w -40°C to 85°C, and features a 5mm diameter. Ideal for connecting devices requiring reliable data transmission in various applications.
M22759/11-22-9
Quirk Wire
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; No. of Conductors: 1; Insulator Material: PTFE; Stranding: 19X34;
35110BK199
Alpha Wire 35110BK199 is a CE-approved electrical wire with stranded construction and polyethylene jacket. Featuring 300V rating, it has tin-finished copper alloy conductors suitable for flexible cord and fixture wire applications. With a temperature range of -30 to 80°C, this wire offers shielding and resistance of 0.054 ohm.
C3365/26
C3365/26 by 3M EPD is a UL/CUL approved flat flexible cable with 26 conductors of 28 AWG tinned copper. Featuring PVC insulation, it operates b/w -20°C to 105°C, making it ideal for electrical wiring applications requiring flexibility and durability.
34105
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Wire & Cable Name: COMMUNICATION CABLE; IEC Conformity: NO; Diameter: 17.5 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
982670233
Molex
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 8;
982661034
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Conductor Material: COPPER ALLOY; MIL Conformity: NO;
982661014
Molex 982661014 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a max operating temperature of 105°C and min of -40°C, this 0.03 mm2 cross-section cable has 31 conductors and is ideal for low current (0.5A) electrical wiring needs.
982670387
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 22;
982670431
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 26;
982661009
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; IEC Conformity: NO; Cross Section Area: .03 mm2;
982660193
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; Construction: FLAT;
982670409
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 24;
982670255
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 10;
982660404
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Construction: FLAT; Resistance: .73 ohm;
982670277
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 12;
982660989
Molex 982660989 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor. Polyester insulator withstands -40 to 105 °C. Ideal for applications requiring 0.03 mm2 cross section area, 0.73 ohm resistance, and 0.5A rated current in electrical wiring setups.
982670321
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 16;
982661013
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Insulator Material: POLYESTER;
982660343
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; No. of Conductors: 32; Minimum Operating Temperature: -40 Cel;
982661025
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; No. of Conductors: 31; Approvals (V): UL;
982660349
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Resistance: .73 ohm; DIN Conformity: NO;
982660051
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; DIN Conformity: NO; Conductor Finish: TIN;
982661033
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; MIL Conformity: NO; Minimum Operating Temperature: -40 Cel;
982660058
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; No. of Conductors: 6; Resistance: .73 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved