Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 90814-0810 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1GΩ, and body width of 0.197". It is used for PCB mounting in various applications requiring a reliable and durable connection.
Median Price
$0.728
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.537
1k+ parts
$0.444
10k+ parts
$0.392
Element14
$0.770
$0.755
$0.733
$0.693
Mouser Electronics
$0.830
$0.595
$0.522
$0.459
Farnell
$0.856
$0.565
-
DigiKey
$0.890
Newark
$0.919
$0.710
$0.642
TTI Europe
$0.456
Chip1Stop
$0.479
RS (Exports)
$0.518
$0.439
Verical
$0.530
Powell Electronics
$0.413
Digiode
$0.109
Nova Conductors
$0.485
Rapid Electronics
$0.685
TME
$0.740
$0.461
$0.434
NAC Semi
$0.713
Vyrian
VNN
IBS Electronics
$0.561
LIBRA Elektronik GmbH
Sunrise Surplus Inc.
Corphita
$0.104
Aranea Global
$0.476
$0.457
Continental Prestige Electronics
Argo Parts USA
$0.471
Perfect Parts
Assy Fe
GreenTree Electronics
$0.465
Abacus Technologies
Andel Nordic
Eastek
0.05 - The close contact pitch ensures secure and reliable electrical connections.
1000000000 ohm - High insulation resistance helps to prevent electrical leakage and signal loss.
0.197 inch - The compact body width allows for space-saving installation on circuit boards.
TIN OVER NICKEL - The termination contact finish provides excellent corrosion resistance and ensures a long lifespan.
GLASS FILLED POLYAMIDE - The use of glass-filled polyamide as the insulator material enhances strength and durability.
2 - Having multiple rows loaded allows for increased connectivity options.
PEG - The PEG board mounting option facilitates easy and secure installation on the circuit board.
105 - The product can withstand high temperatures, making it suitable for various environments.
40 °C - The product can withstand low temperatures, ensuring reliable performance in extreme conditions.
2 - Multiple PCB rows provide flexibility in circuit board design and connectivity.
BOARD CONNECTOR - This connector type is specifically designed for board-to-board or board-to-cable connections.
94V-0 - The product meets strict safety standards and offers high resistance to fire.
1.2 A - The product can handle a high signal current, ensuring efficient signal transmission.
BEIGE - The attractive beige color adds aesthetic value to the product.
UL - The product adheres to the standards set by Underwriters Laboratories for safety and quality.
10 - With a sufficient number of contacts, the product allows for extensive connectivity options.
ONE - The product features a single connector for simple and easy installation.
BOARD - The board mounting type enables secure attachment to the circuit board.
1.27 - The precise terminal pitch ensures accurate electrical connections.
STAGGERED - The staggered contact pattern facilitates improved signal transmission and reduces crosstalk.
SURFACE MOUNT - The surface mount termination type offers convenient and efficient installation on the PCB surface.
MALE - The male contact provides compatibility and ease of connection with corresponding female connectors.
15 mohm - Low contact resistance ensures minimal signal loss and optimal performance.
RECEPTACLE - The receptacle style provides a secure and reliable connection point for mating connectors.
STRAIGHT - The straight mounting style simplifies installation and allows for a neat and organized PCB layout.
BLADE PIN-SKT - The blade pin-socket contact style ensures a solid and secure connection.
LOCKING - The locking mounting option adds extra security to prevent unintentional disconnection.
RECTANGULAR - The rectangular contact pattern offers versatility and ease of connection.
COMMERCIAL - The product is designed to meet the reliability requirements of commercial applications.
Headers & Edge Type Connectors 90814-0810 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
90814-0810 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Multiple Devices Location 05/Dec/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
Semtech Electronics
Meritek Electronics
54104-4031
Molex
Molex 54104-4031 is a FFC/FPC connector with 40 contacts, 0.020" pitch, and gold termination finish. Ideal for board mounting applications with a temperature range of -20 to 85°C. Features include polyamide insulator, 250VAC voltage rating, and UL94V-0 flammability code.
1-640456-5
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; No. of Rows Loaded: 1;
B4B-ZR-SM4-TF(LF)(SN)
J S T Mfg
B4B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
B10B-PHDSS(LF)(SN)
B10B-PHDSS(LF)(SN) by J S T Mfg is a 2-row BOARD CONNECTOR with 10 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 800VAC, it is ideal for applications requiring reliable board-to-board connections in electronics.
103948-9
TE Connectivity 103948-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features POLYETHYLENE insulation, tin/lead finish, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with latching mounting options.
10-11-2023
Molex 10-11-2023 is a board connector with 0.1" mating contact pitch, POLYAMIDE insulator, and 1000VAC dielectric voltage. It's ideal for commercial applications requiring a durable, polarized housing with 2 contacts and crimp termination for 22-30 AWG wires.
61300511121
Wuerth Elektronik & Kg
61300511121 by Wurth Elektronik is a BOARD CONNECTOR with 5 contacts, rated for 3A signal current. Featuring a mating contact pitch of 0.1", it has gold over nickel termination finish and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
78171-0004
Molex 78171-0004 is a board connector with 0.047" pitch, suitable for applications requiring 1.5A signal current. Featuring gold nickel finish and liquid crystal polymer insulator, it offers durability of 10 cycles. With a temperature range of -25 to 85°C, this male connector has a total of 4 contacts and is UL certified for reliability in commercial settings.
1-281739-0
TE Connectivity 1-281739-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and is suitable for applications requiring high insulation resistance.
DT06-6S-EP06
TE Connectivity's DT06-6S-EP06 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this polarized connector has a total of 6 contacts and UL certification.
7-215079-6
TE Connectivity 7-215079-6: Headers & Edge Type Connectors with 0.05" pitch, 1A signal current rating, and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. Ideal for board mounting applications in commercial settings due to its durability and UL Flammability Code of 94V-0.
87832-5622
Molex 87832-5622 is a 14-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Features include 1400VAC dielectric voltage, -55 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male connectors with surface mount termination.
22-01-3027
Molex 22-01-3027 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulator, it offers 700VAC dielectric voltage and operates b/w -40 to 105°C. With a removable contact block design, it has a durability of 25 cycles and supports up to 4A signal current.
FTSH-107-01-L-DV-K-A-TR
Samtec
Samtec's FTSH-107-01-L-DV-K-A-TR is a 2-row, 14-contact male board connector with tin finish. Operating b/w -55°C to 125°C, it has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in various electronic devices.
B06B-PASK-1
B06B-PASK-1 by J S T Mfg is a BOARD CONNECTOR with 6 contacts, made of COPPER ALLOY. It has Tin/Lead termination finish and 2mm terminal pitch for soldering. Ideal for applications requiring reliable male connectors in headers & edge type configurations.
FTSH-105-01-L-DV
The Samtec FTSH-105-01-L-DV is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, surface-mountable connector with a UL94V-0 flammability rating.
DF19G-20P-1H(52)
Hirose Electric
DF19G-20P-1H(52) by Hirose Electric is a 20-contact FFC/FPC connector with 0.93"x.065"x.224" dimensions, POLYAMIDE insulator, and UL 94V-0 flammability rating. Ideal for board mounting in applications requiring right angle receptacle connectors with square pin sockets.
1-2129458-1
TE Connectivity 1-2129458-1 is a PCB connector with 5 contacts, rated at 25V and 12.5A signal current. Made of polyethylene, it operates b/w -40 to 85°C. Ideal for board mounting applications requiring a right angle jack with solder termination.
22-55-2101
The Molex 22-55-2101 is a 2-row board connector with 0.1" pitch, suitable for commercial applications. Featuring glass-filled polyester insulator, it has 10 contacts and operates b/w -40 to 120°C. With crimp termination and female SQ pin-skt contact style, it is UL and CSA compliant for reliable performance in various electronic devices.
B4B-EH-A(LF)(SN)
B4B-EH-A(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.098" pitch, 0.492" body length, and 0.15" body width. It uses TIN COPPER termination for soldering applications in headers & edge type connectors. The connector features POLYAMIDE66 insulator material and BRASS contact material, suitable for various electronic devices requiring a male contact gender.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
90814-0904
The Molex 90814-0904 header connector features a mating contact pitch of 0.05", insulation resistance of 1G ohm, and body width of 0.197". Ideal for board mounting with a max operating temperature of 105°C, it is commonly used in commercial applications requiring a rated current of 1.2A.
90814-0806
The Molex 90814-0806 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1G ohm, and body width of 0.197". It is used in applications requiring a male blade pin-skt contact style, surface mount termination type, and UL flammability rating of 94V-0.
90814-3210
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 2;
90814-0804
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
90814-0808
The Molex 90814-0808 is a board connector with 0.05" contact pitch, 1.2A signal current rating, and -40 to 105°C operating temperature range. It features TIN over NICKEL finish, GLASS FILLED POLYAMIDE insulator, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable connections in electronic devices.
90814-3204
Molex 90814-3204 is a board connector with 0.05" pitch, 1.2A signal current rating, and -40 to 105°C operating temperature range. Ideal for commercial applications requiring male blade pin-skt contacts in a receptacle body style for surface mount termination on PCBs with staggered contact pattern.
90814-0820
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: STAGGERED;
908160008
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
908160012
Molex 908160012 is a board connector with 12 contacts, 0.05" pitch, and TIN over nickel finish. It has a temperature range of -40 to 105°C and insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable male connectors on PCBs with staggered contact pattern.
908160018
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
90814-0816
908160004
Molex 908160004 is a board connector with 0.05" pitch, suitable for commercial applications. Featuring TIN over NICKEL finish, it has 4 contacts and operates b/w -40 to 105°C. With a male contact gender and black insulator color, it offers high insulation resistance of 1G ohm.
90814-0210
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 10;
90814-0910
The Molex 90814-0910 is a board connector with a mating contact pitch of 0.05 inches and insulation resistance of 1,000,000,000 ohms. It has a body width of 0.197 inches and is made from glass-filled polyamide. This connector is commonly used in commercial applications for surface mount termination on PCBs.
90814-0916
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05;
90814-3818
90814-0004
90814-0812
The Molex 90814-0812 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1GΩ, and body width of 0.197". It is used for PCB mounting in various applications requiring a reliable and durable connection.
90814-0208
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Rated Current - Signal: 1.2 A;
90814-0822
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved