Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 90814-0804 is a board connector with 0.05" pitch, 1.2A signal current, and -40 to 105°C operating range. Ideal for commercial applications, it features surface mount termination, glass-filled polyamide insulator, and UL94V-0 flammability rating.
Median Price
$0.512
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.496
100+ parts
$0.472
1k+ parts
10k+ parts
-
Arrow
$0.529
$0.425
$0.366
$0.318
Mouser Electronics
$0.570
$0.471
$0.348
$0.317
DigiKey
$0.820
$0.568
$0.454
$0.377
Distrelec
$0.896
TTI Europe
$0.330
Chip1Stop
$0.304
$0.290
Verical
$0.294
Master Electronics
$0.410
$0.297
Powell Electronics
$0.289
$0.268
Element14
$0.555
$0.441
$0.426
Farnell
$0.250
Newark
$0.560
$0.503
RS (Exports)
$0.553
$0.509
TestEquity
$0.370
Digiode
$0.408
Nova Conductors
$0.499
Rapid Electronics
TME
$0.640
$0.477
$0.416
$0.324
NexGen Digital
IBS Electronics
$0.323
$0.299
Vyrian
VNN
ABC Electronics Ltd.
Semicontronic
$0.212
$0.207
$0.206
Corphita
$0.387
Argo Parts USA
$0.450
$0.436
Advanced Electronics
Netroflash
$0.489
Continental Prestige Electronics
$0.663
$0.378
$0.322
Andel Nordic
$7.041
$6.760
Aztec Data Supply Inc.
$8.621
Perfect Parts
Eastek
Assy Fe
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Computer Components Inc. - USA
The close contact spacing of 0.05 inch helps in providing a reliable connection and preventing signal interference.
High insulation resistance helps in ensuring minimal signal loss and maintaining signal integrity.
Compact body width of 0.197 inch allows for space-saving integration on the PCB.
Tin over nickel finish provides excellent conductivity and corrosion resistance for long-term performance.
The use of glass-filled polyamide as insulator material ensures high durability and resistance to heat and chemicals.
High maximum operating temperature of 105°C allows for reliable performance in various environments.
Low minimum operating temperature of -40°C enables usage in cold conditions without compromising functionality.
With 4 total contacts, this connector offers sufficient connectivity options for various applications.
Single connector design simplifies installation and maintenance procedures.
Board mounting option ensures secure attachment to the PCB for stable connections.
A high rated current of 1.2 A allows for the transmission of moderate power signals without overheating.
UL 94V-0 flammability rating provides assurance of fire safety compliance for the product.
Low contact resistance of 15 mohm ensures efficient signal transmission and minimal power loss.
Straight mounting style simplifies installation and ensures a clean and organized PCB layout.
Commercial-grade reliability ensures consistent performance and longevity under normal operating conditions.
Headers & Edge Type Connectors 90814-0804 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
90814-0804 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Raw Material Supplier 04/Jan/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WS
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Tak Cheong Electronics Holdings
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Excel (Suzhou) Semiconductor
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Vishay Telefunken
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
B2B-PH-SM4-TB
J S T Mfg
B2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, suitable for applications requiring 2A signal current. Featuring POLYAMIDE insulator and COPPER ALLOY contacts, it has an operating temperature range of -25 to 85°C and dielectric voltage of 800VAC.
52030-0829
Molex
The Molex 52030-0829 FFC/FPC connector has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 500VAC. It is used in applications requiring a durable, straight-mounting female connector with staggered PCB contact pattern for commercial reliability.
2-5767004-2
TE Connectivity
TE Connectivity 2-5767004-2 is a board stacking connector with 39 contacts, rated at 11.5A for signal current. It features a mating contact pitch of 0.025", insulation resistance of 2M ohm, and dielectric voltage withstand of 500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
61300811121
Wuerth Elektronik & Kg
61300811121 by Wurth Elektronik is a BOARD CONNECTOR with 8 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and can withstand up to 500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 125°C on PCBs with a rectangular contact pattern.
47352-1001
Molex 47352-1001 is a PCB connector with 0.043" pitch, GOLD finish, and 500VAC voltage rating. Ideal for board mounting applications in commercial settings, featuring liquid crystal polymer insulator and male contact gender. Operating temperature range from -20 to 85 °C with durability of 5000 cycles.
43025-1000
The Molex 43025-1000 is a board connector with 10 contacts arranged in S0P10 pattern. It has a mating contact pitch of 0.118", insulation resistance of 1Gohm, and rated current of 2.5A. Ideal for commercial applications, it features a polyamide insulator, operates b/w -40 to 105°C, and has UL94V-0 flammability rating.
65823-220LF
Amphenol Communications Solutions
Amphenol's 65823-220LF is a 20-contact board connector with nickel palladium gold finish. Featuring 2 rows, it has a terminal pitch of 2.54mm and UL94V-0 flammability rating. Ideal for applications requiring right-angle mounting in headers & edge type connectors.
FTSH-110-01-L-DV-K
Samtec
The Samtec FTSH-110-01-L-DV-K is a 2-row board connector with a mating contact pitch of 0.05 inches. It has a body length of 0.5 inches and can operate at temperatures ranging from -55 to 125°C. This connector is commonly used in commercial applications requiring reliable surface mount connections.
10152821-103Q000LF
Amphenol Communications Solutions' 10152821-103Q000LF is a card edge connector with 164 contacts, gold termination finish, and glass-filled polyamide insulator. It has a mating contact pitch of 0.039", operates b/w -55 to 105°C, and offers a rated current of 1.1A. Ideal for board mounting applications requiring durability and reliable signal transmission.
DF11-10DP-2DS(24)
Hirose Electric
DF11-10DP-2DS(24) by Hirose Electric is a 10-contact board connector with 0.079" pitch, suitable for PCB applications. It features a dielectric voltage of 650VAC, insulation resistance of 1Gohm, and operates b/w -30 to 85°C. Ideal for commercial use, it offers durability of 30 cycles and solder termination type.
87833-1420
Molex 87833-1420 is a 14-contact board connector with 2 rows, featuring tin finish, polyamide insulator, and phosphor bronze contacts. It operates b/w -55°C to 105°C, ideal for commercial applications requiring a reliable signal current of up to 2A. The right-angle receptacle design with locking mounting suits PCBs needing a mating contact pitch of 0.079".
B6B-ZR(LF)(SN)
B6B-ZR(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.059" pitch, GLASS FILLED POLYAMIDE66 insulator, and 500VAC dielectric voltage. It operates b/w -25 to 85 °C, suitable for applications requiring high insulation resistance and UL94V-0 flammability rating.
DF40C-100DS-0.4V(58)
DF40C-100DS-0.4V(58) by Hirose Electric is a 2-row, 100-contact board stacking connector with gold termination finish. Featuring liquid crystal polymer insulator, it offers 50000000 ohm insulation resistance and 100VAC dielectric voltage. Ideal for commercial applications requiring signal current of 0.3A, operating b/w -35 to 85°C temperature range.
B8B-PH-K(LF)(SN)
B8B-PH-K(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male SQ PIN-SKT contact style, such as PCB connections in electronics with operating temperatures ranging from -25 to 85 °C.
1-640456-6
TE Connectivity 1-640456-6 is a board connector with 16 contacts, 0.1" pitch, and 5A signal rating. It features tin finish, glass-filled polyester insulator, and operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable male connectors on PCBs.
52271-1669
Molex 52271-1669 is a FFC/FPC connector with 16 contacts, mating pitch of 0.039", and body width of 0.118". It features TIN over nickel termination finish, polyamide insulator, and UL94V-0 flammability rating. Ideal for board mounting applications requiring surface mount termination in commercial settings.
20021121-00006C4LF
Amphenol Communications Solutions' 20021121-00006C4LF is a board connector with 0.05" mating contact pitch, 100000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for applications requiring a durable male connector with surface mount termination and black insulator color.
47334-0001
The Molex 47334-0001 is a PCB connector with a mating contact pitch of 0.043" and a body length of 0.551". It has an insulation resistance of 100MΩ and is commonly used in board mounting applications.
BM02B-GHS-TBT(LF)(SN)(N)
BM02B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 1-row, surface mount board connector with tin termination contact finish. It has 2 contacts and a terminal pitch of 1.25mm. This connector is commonly used in headers & edge type connectors for various applications.
1-1473005-4
TE Connectivity 1-1473005-4 is a CARD EDGE CONNECTOR with 200 contacts, 0.024" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings due to its durability, right angle mounting style, and female contact gender.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
90814-0904
The Molex 90814-0904 header connector features a mating contact pitch of 0.05", insulation resistance of 1G ohm, and body width of 0.197". Ideal for board mounting with a max operating temperature of 105°C, it is commonly used in commercial applications requiring a rated current of 1.2A.
90814-0806
The Molex 90814-0806 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1G ohm, and body width of 0.197". It is used in applications requiring a male blade pin-skt contact style, surface mount termination type, and UL flammability rating of 94V-0.
90814-3210
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 2;
90814-0808
The Molex 90814-0808 is a board connector with 0.05" contact pitch, 1.2A signal current rating, and -40 to 105°C operating temperature range. It features TIN over NICKEL finish, GLASS FILLED POLYAMIDE insulator, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable connections in electronic devices.
90814-3204
Molex 90814-3204 is a board connector with 0.05" pitch, 1.2A signal current rating, and -40 to 105°C operating temperature range. Ideal for commercial applications requiring male blade pin-skt contacts in a receptacle body style for surface mount termination on PCBs with staggered contact pattern.
90814-0820
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: STAGGERED;
908160008
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
908160012
Molex 908160012 is a board connector with 12 contacts, 0.05" pitch, and TIN over nickel finish. It has a temperature range of -40 to 105°C and insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable male connectors on PCBs with staggered contact pattern.
908160018
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
90814-0816
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
908160004
Molex 908160004 is a board connector with 0.05" pitch, suitable for commercial applications. Featuring TIN over NICKEL finish, it has 4 contacts and operates b/w -40 to 105°C. With a male contact gender and black insulator color, it offers high insulation resistance of 1G ohm.
90814-0210
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 10;
90814-0910
The Molex 90814-0910 is a board connector with a mating contact pitch of 0.05 inches and insulation resistance of 1,000,000,000 ohms. It has a body width of 0.197 inches and is made from glass-filled polyamide. This connector is commonly used in commercial applications for surface mount termination on PCBs.
90814-0916
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05;
90814-3818
90814-0004
90814-0810
The Molex 90814-0810 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1GΩ, and body width of 0.197". It is used for PCB mounting in various applications requiring a reliable and durable connection.
90814-0812
The Molex 90814-0812 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1GΩ, and body width of 0.197". It is used for PCB mounting in various applications requiring a reliable and durable connection.
90814-0208
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Rated Current - Signal: 1.2 A;
90814-0822
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved