Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 90152-2340 is a board connector with a mating contact pitch of 0.100 inch. It has a body length of 2 inch and width of 0.23 inch. This right angle mounting style connector has 40 contacts and is commonly used in PCB applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Nova Conductors
Semicontronic
$5.500
$5.362
$5.335
Aztec Data Supply Inc.
$6.623
AZTECH Wire
$13.655
Continental Prestige Electronics
Corphita
Bastille Electronics
Argo Parts USA
Allows for easy mating and connection with compatible components.
Provides ample space for connections and wiring.
Compact size allows for efficient use of space on the PCB.
Provides durability and insulation for safe operation.
Allows for multiple connections in a single connector.
Enables easy and precise placement on the PCB.
Ensures reliable conductivity and corrosion resistance.
Provides options for connecting multiple PCBs.
Specifically designed for PCB applications.
Professional and sleek appearance.
Allows for numerous connections in a single unit.
Simplifies assembly and installation.
Securely attaches to the PCB for stable connections.
Standard pitch for compatibility with various components.
Provides a consistent and easy-to-use layout.
Reliable and secure connection method.
Compatible with male connectors for reliable connections.
Allows for flexible PCB layout options.
Ensures secure and stable connections.
Provides ample length for soldering and connection.
Headers & Edge Type Connectors 90152-2340 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Filter Feature:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
90152-2340 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
Formosa Microsemi
NXP Semiconductors
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Microsemi
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
ZHR-8
J S T Mfg
ZHR-8 by J S T Mfg is a board connector with 8 contacts, 0.059" pitch, and 500VAC dielectric voltage. It is ideal for applications requiring a polarized housing, such as cable mounting with crimp termination. With a temperature range of -25 to 85°C, it offers reliable performance in various environments.
FTSH-105-01-L-DV-P-TR
Samtec
Samtec's FTSH-105-01-L-DV-P-TR is a 2-row, 10-contact board connector with a contact pitch of 1.27mm. Featuring gold mating contacts over nickel, it has a temperature range of -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
26-60-4040
Molex
Molex 26-60-4040 is a board connector with 4 contacts, 0.156" pitch, and 1500VAC dielectric voltage. Ideal for commercial applications, it features polyester insulation, brass contacts, and -40 to 105°C operating temperature range.
1-1473005-4
TE Connectivity
TE Connectivity 1-1473005-4 is a CARD EDGE CONNECTOR with 200 contacts, 0.024" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings due to its durability, right angle mounting style, and female contact gender.
HLW12S-2C7LF
Amphenol Communications Solutions
HLW12S-2C7LF by Amphenol is a 12-contact FFC/FPC connector with 0.039" mating pitch and tin finish. It is UL 94V-0 rated, suitable for board mounting with solder termination. Ideal for applications requiring straight female connectors in headers & edge type setups.
09061486901
Harting Electronics & Kg
09061486901 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.2", Insulation Resistance of 1TΩ, and Dielectric Withstanding Voltage of 1550VAC. Ideal for board connections in applications requiring durability, reliability, and high current signal transmission at temperatures ranging from -65 to 125°C.
50-37-5023
The Molex 50-37-5023 is a board connector with a mating contact pitch of 0.098". It features an insulation resistance of 1G ohm and can withstand up to 1000VAC. This dual-polarized connector, suitable for commercial applications, has a rated current of 3A and operates b/w -40°C to 105°C.
1057
Keystone Electronics
PCB CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
S8B-PH-SM4-TB(LF)(SN)
S8B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 8-contact BOARD CONNECTOR with POLYAMIDE6T insulator, COPPER ALLOY contacts, and Tin (Sn) finish. It has 0.783" x 0.217" x 0.339" dimensions, operates b/w -25°C to 85°C. Ideal for PCB applications requiring right angle mounting and surface mount termination.
PHR-6-Y
PHR-6-Y by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and POLYAMIDE66 insulator. It has a dielectric voltage of 800VAC, operates b/w -25 to 85°C, and features FEMALE SQ PIN-SKT contacts for CABLE mounting applications.
53398-0571
Molex 53398-0571 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style and surface mount termination on a straight receptacle body for durability in PCB mounting.
502351-0800
The Molex 502351-0800 is a board connector with mating contact pitch of 0.079", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. It is used in commercial applications requiring an 8-contact male receptacle with crimp termination for cable mounting.
MTCB1X-106-XXXCS025
BOARD CONNECTOR;
B13B-PH-K-S(LF)(SN)
B13B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 1.098" length, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with 2A signal current, operating b/w -25°C to 85°C.
SHF-105-01-L-D-SM-LC-TR
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
324-91-162-41-002000
Mill-max Mfg
BOARD CONNECTOR; Contact Material: BERYLLIUM COPPER; JESD-609 Code: e0; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED;
TSM-104-01-T-SH
Samtec's TSM-104-01-T-SH header connector features a 0.1" contact pitch, matte tin finish, and liquid crystal polymer insulator. Ideal for board mounting with a temperature range of -55 to 105°C, it has a right-angle male contact style suitable for commercial applications.
1-2129458-1
TE Connectivity 1-2129458-1 is a PCB connector with 5 contacts, rated at 25V and 12.5A signal current. Made of polyethylene, it operates b/w -40 to 85°C. Ideal for board mounting applications requiring a right angle jack with solder termination.
6420-9200
3m Electronic Products Division
3M Electronic Products Division's 6420-9200 is a 20-contact board connector with 2 rows, 0.1" pitch, and glass-filled polyester insulator. It features UL94V-0 flammability rating, solder termination, and straight mounting style. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
851-
851- by Mill-max Mfg is a BOARD CONNECTOR with 1.27mm Terminal Pitch, SOLDER Termination Type, and MALE Contact Gender. It is used in Headers & Edge Type Connectors for STRAIGHT Mounting on PCBs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
90151-2114
The Molex 90151-2114 is a board connector with 14 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates in temperatures ranging from -55 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
90156-0144
Molex 90156-0144 is a board connector with 0.1" pitch, rated for 3A signal current. It features POLYPHENYLENE OXIDE insulation, operates b/w -55 to 105°C, and has a durability of 500 cycles. Ideal for commercial applications requiring a reliable female plug with crimp termination and rectangular contact pattern.
90152-2110
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VDC; No. of Connectors: ONE;
90156-0145
The Molex 90156-0145 is a board connector with a mating contact pitch of 0.1 inch. It has a body length of 0.542 inch and insulation resistance of 1000000000 ohm. This connector is commonly used in commercial applications and can withstand temperatures ranging from -55 to 105 °C.
90156-0142
The Molex 90156-0142 is a board connector with 0.1" pitch, rated for 3A signal current, and has a durability of 500 cycles. It features POLYPHENYLENE OXIDE insulation material and operates b/w -55 to 105°C. Ideal for commercial applications requiring a reliable female plug connector with crimp termination on cables.
90151-2116
90156-0160
Molex 90156-0160 is a board connector with 20 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -55°C to 105°C. Ideal for cable mounting applications, it offers durability up to 500 cycles and UL flammability rating of 94V-1.
90151-2210
90156-0143
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; Body Depth: .6 inch;
90151-2120
90152-2140
90151-2126
Molex 90151-2126 is a 26-contact board connector with 0.1" pitch, suitable for commercial applications. Features include 350VDC dielectric voltage, -55 to 125°C operating range, and UL94V-0 flammability rating. Ideal for PCB connections requiring high insulation resistance and reliable signal current of up to 3A.
90151-2512
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Style: STRAIGHT; Mating Contact Finish: NOT SPECIFIED;
90151-2150
90151-2124
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; No. of Rows Loaded: 2;
90152-2240
90152-2250
Molex 90152-2250 is a 2-row board connector with 50 contacts, 0.1" pitch, and 3A signal rating. Ideal for PCB applications requiring a reliable, high-density connection with solder termination. Operating temperature range from -55 to 125°C makes it suitable for commercial use cases.
90156-0146
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Insertion Force (N): 2.9468; No. of Rows Loaded: 1;
90156-0147
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Pitch (inch): 0.1; DIN Conformance: NO;
90152-2364
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved