Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 90122-0123, a board connector with 0.1" mating contact pitch, is ideal for commercial applications. Featuring 2 rows loaded with 6 contacts, it offers a rated current of 3A and operates b/w -55°C to 125°C. With solder termination and UL94V-0 flammability rating, this right-angle receptacle has a dielectric voltage of 350VDC.
Median Price
$1.050
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Arrow
1+ parts
$0.884
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.940
$0.890
Element14
$1.237
$0.854
$0.683
$0.636
Mouser Electronics
$1.460
$0.946
$0.766
Master Electronics
$1.830
$1.290
$1.170
DigiKey
$0.710
$0.670
NEP Electronics
Newark
$1.750
$1.250
Chip1Stop
$0.703
$0.669
Farnell
$0.778
Digiode
$0.147
Nova Conductors
Rapid Electronics
$0.965
TestEquity
$1.120
VNN
A&K Electronics
Rotakorn
Bristol Electronics
IBS Electronics
$0.938
$0.700
Vyrian
Prism Electronics
Corphita
$0.140
Netroflash
Continental Prestige Electronics
$1.180
$0.633
$0.606
Andel Nordic
$8.116
$7.792
Authorized Procurement Solutions
Perfect Parts
Assy Fe
GreenTree Electronics
Legend Electronics Inc. (Excess)
Speed Components Ltd (Excess)
Close contact pitch allows for high density connections, saving space on the PCB.
High insulation resistance ensures minimal leakage and reliable performance.
Withstands high voltages, ensuring safety and reliability in electrical connections.
Can operate in elevated temperatures without compromising performance.
Capable of carrying higher current signals, suitable for various applications.
Headers & Edge Type Connectors 90122-0123 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
90122-0123 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Starsea Electronics
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1-640456-5
TE Connectivity
TE Connectivity 1-640456-5 is a 15-contact board connector with 0.1" pitch, TIN finish, and UL94V-0 flammability rating. Ideal for commercial applications, it features a 5A signal current rating and operates b/w -55°C to 105°C temperature range.
22-10-2021
Molex
Molex 22-10-2021 header connector features 0.1" pitch, 0.19" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with a temperature range of 0-75°C. Male contact pins with matte tin finish over nickel for durability and reliability in PCB mounting.
47054-1000
The Molex 47054-1000 is a board connector with 4 contacts, 0.1" pitch, and 1500VAC dielectric voltage. It has a 0.425" body length, 0.229" width, and 0.5" depth. Ideal for commercial applications requiring a durable header connector with crimp termination and polarized housing.
DF3-4S-2C
Hirose Electric
DF3-4S-2C by Hirose Electric is a 4-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. It is used in cable mounting applications for signal currents up to 3A, featuring UL94V-0 flammability rating and POLYAMIDE insulator material.
70543-0003
Molex 70543-0003 header connector features 0.1" pitch, 850VAC dielectric voltage, and -40 to 105°C operating range. Ideal for board connections in commercial applications requiring a durable, polarized housing with matte tin finish and phosphor bronze contacts.
1-640456-6
TE Connectivity 1-640456-6 is a board connector with 16 contacts, 0.1" pitch, and 5A signal rating. It features tin finish, glass-filled polyester insulator, and operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable male connectors on PCBs.
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; JESD-609 Code: e3; Mounting Type: BOARD;
SSW-108-01-S-D
Samtec
SSW-108-01-S-D by Samtec is a 2-row, 16-contact board connector with a mating contact pitch of 0.1 inch. It features a liquid crystal polymer insulator and matte tin termination contact finish. This socket-style connector is commonly used in commercial applications requiring reliable connections on printed circuit boards.
TFSD-20-28C-H-34.00-S
Samtec's TFSD-20-28C-H-34.00-S is a 2-row, 40-contact board connector with female contacts for cable mounting. It features crimp termination and socket body style, ideal for high-density applications in electronics and telecommunications industries.
DF3A-4P-2DSA
DF3A-4P-2DSA by Hirose Electric is a 4-contact board connector with 0.079" pitch, suitable for commercial applications. It features a dielectric voltage of 650VAC, insulation resistance of 1Gohm, and operates b/w -30 to 85°C. Ideal for PCB mounting with solder termination and UL94V-0 flammability rating.
ESHF-105-01-L-D-SM-LC
ESHF-105-01-L-D-SM-LC by Samtec is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05", matte tin termination finish, and liquid crystal polymer insulator. It has a temperature range of -55 to 125°C and is ideal for commercial applications requiring a polarized housing and surface mount termination on rectangular PCB patterns.
504077-1891
Molex 504077-1891 is a PCB connector with 0.043" contact pitch, 8u plating thickness, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features liquid crystal polymer insulator material and operates b/w -40 to 85 °C.
B2P-VH-BK(LF)(SN)
J S T Mfg
B2P-VH-BK(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 10A signal current, and POLYAMIDE66 insulator. It has a dielectric voltage of 1500VAC and operates b/w -25 to 85°C. Ideal for PCB applications requiring a polarized housing with male SQ PIN-SKT contacts.
XHP-3
XHP-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, suitable for CABLE mounting. Featuring POLYAMIDE6 insulator and UL94V-0 flammability rating, it operates b/w -25 to 85°C. With 1000VAC dielectric voltage and 3A signal current, it's ideal for applications requiring FEMALE SQ PIN-SKT contacts.
SHF-105-01-L-D-SM-LC-TR
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
FTSH-105-01-F-DV-K-P-TR
Samtec's FTSH-105-01-F-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
B6BZR(LF)(SN)
B6BZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" mating contact pitch, 500VAC dielectric voltage, and 1A signal current rating. It is used in commercial applications, featuring GLASS FILLED POLYAMIDE insulation material and BRASS contact material for reliability.
51021-0200
The Molex 51021-0200 is a board connector with 0.049" pitch, 0.167" body length, and POLYBUTYLENE insulation material. It has 2 contacts, operates b/w -40 to 85°C, and features a female crimp termination for cable mounting. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability rating.
31249116
Ria Electronic
BOARD CONNECTOR; Option: GENERAL PURPOSE;
DM3CS-SF
The Hirose Electric DM3CS-SF is a card edge connector with 0.043" mating contact pitch, 500VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings, featuring male compression contacts and a surface mount termination type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
90120-0762
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
90120-0122
The Molex 90120-0122 is a board connector with a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage rating of 1000VAC. It is used in applications requiring a durable male connector with solder termination, suitable for commercial reliability standards.
90120-0763
Molex 90120-0763 is a board connector with 0.1" pitch, suitable for commercial applications. It features bright tin contact finish, 1000VAC dielectric voltage, and 3A signal current rating. Ideal for use in electronics requiring durable male connectors with solder termination.
90120-0126
90120-0123
90121-0766
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 350VDC; No. of Connectors: ONE;
90120-0926
90120-0124
90121-0772
The Molex 90121-0772 is a board connector with 12 contacts, 0.1" pitch, and 3A signal rating. It features a glass-filled polyester insulator, tin contact finish, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable right-angle mounting on PCBs.
90120-0125
90120-0128
90120-0764
90122-0780
Molex 90122-0780 is a 40-contact board connector with 2 rows, 0.1" pitch, and glass-filled polyester insulator. It operates b/w -55°C to 125°C, rated at 3A signal current, and has UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
90122-0765
90121-0762
90122-0125
90120-0956
90121-0763
90121-0922
The Molex 90121-0922 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.2 inch. It has an insulation resistance of 5G ohm and can withstand a dielectric voltage of 350VDC. This connector is commonly used in commercial applications due to its reliability and right angle mounting style.
90122-0132
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved