Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 90122-0765 is a board connector with 10 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1000VAC. Ideal for commercial applications requiring reliable connections in PCBs with a temperature range from -55 to 125°C.
Median Price
$2.117
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Arrow
1+ parts
$0.933
100+ parts
$0.915
1k+ parts
$0.902
10k+ parts
-
Element14
$2.915
$2.728
$2.579
$2.460
DigiKey
$3.210
$2.245
$1.860
Mouser Electronics
$3.340
$2.490
$2.120
$1.980
Newark
$3.650
$2.780
$2.400
Verical
$1.162
$1.000
Chip1Stop
$1.010
$0.950
$0.899
Farnell
$0.947
Master Electronics
$1.970
$1.850
$1.460
RS (Exports)
$2.264
$1.916
Digiode
$0.886
Rapid Electronics
$1.411
Nova Conductors
$1.600
TestEquity
$1.800
TME
$2.110
$1.610
$1.210
IBS Electronics
$1.188
$1.375
VNN
ACDS - Activité Composants Distribution Service
Vyrian
Speed Components Ltd
NAC Semi
$1.760
EMSNET
Semicontronic
$0.790
$0.770
$0.766
Corphita
$0.840
Argo Parts USA
$1.502
Continental Prestige Electronics
$1.472
Advanced Electronics
$1.532
Netroflash
$1.520
$1.488
Andel Nordic
$2.720
$1.904
Aztec Data Supply Inc.
$5.015
Eastek
Assy Fe
Authorized Procurement Solutions
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Close contact pitch allows for high density connections, making this product suitable for applications requiring multiple connections in a limited space.
Optimal length for secure connection and stability on the PCB.
High insulation resistance ensures minimal leakage and interference, improving signal integrity.
Withstanding voltage of 1000VAC provides safe and reliable performance in higher voltage applications.
Glass filled polyester provides good durability and resistance to heat and chemicals, ensuring long-term reliability.
High maximum operating temperature allows for use in a wide range of environments without compromising performance.
A thick plating ensures good conductivity and corrosion resistance for long-lasting connections.
A high-rated current capacity of 3A allows for handling of larger currents, suitable for signal transmission in various applications.
Low contact resistance ensures minimal power loss and signal distortion, maintaining high performance.
Headers & Edge Type Connectors 90122-0765 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
90122-0765 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rectron
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Cheng-yi Electronic
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
853-93-010-20-001000
Mill-max Mfg
Mill-max Mfg 853-93-010-20-001000 is a 10-contact, dual-row board connector with tin/lead finish. Featuring beryllium copper contacts, it's ideal for right-angle mounting on boards. This socket connector has a pitch of 1.27mm and is suitable for various electronic applications.
M80-5002042
Harwin Plc
The Harwin PLC M80-5002042 is a 20-contact board connector with 0.079" mating contact pitch, suitable for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 100M ohm and operates b/w -55°C to 125°C. With a durable design rated for 500 cycles, this male plug connector is ideal for commercial use in electronics requiring reliable signal transmission.
1-104257-1
TE Connectivity 1-104257-1 is a board connector with 12 contacts, 0.1" pitch, and 600VAC dielectric voltage. Ideal for commercial applications, it has a temperature range of -65 to 105°C and insulation resistance of 5G ohm.
B06B-PASK-1(LF)(SN)
J S T Mfg
B06B-PASK-1(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.079" pitch, suitable for applications requiring a rated current of 3A. Featuring a dielectric voltage of 800VAC and insulation resistance of 1Gohm, it has a temperature range from -25 to 85°C, making it ideal for various electronic devices.
823-22-012-10-000101
823-22-012-10-000101 by Mill-max Mfg is a 12-contact board stacking connector with gold over nickel finish. Featuring 2 rows, 2.54mm terminal pitch, and UL94V-0 flammability rating, it's ideal for board applications requiring reliable male contacts in straight mounting style.
SSW-102-01-T-D
Samtec
SSW-102-01-T-D by Samtec is a 2-row, 4-contact board connector with a mating contact pitch of 0.1". It features liquid crystal polymer insulator material and phosphor bronze contact material. Ideal for commercial applications requiring a reliable, straight-mount socket connection on PCBs.
35362-0450
Molex
Molex 35362-0450 is a board connector with 4 contacts, featuring 0.079" mating pitch and 0.406" body length. It uses matte tin finish, brass contact material, and polyamide insulator. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
B3B-XH-AM(LF)(SN)
B3B-XH-AM(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and UL94V-0 flammability rating. Ideal for board mounting applications in electronics requiring reliable male connectors.
6420-9200
3m Electronic Products Division
3M Electronic Products Division's 6420-9200 is a 20-contact board connector with 2 rows, 0.1" pitch, and glass-filled polyester insulator. It features UL94V-0 flammability rating, solder termination, and straight mounting style. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
QSH-030-01-L-D-A
Samtec's QSH-030-01-L-D-A is a 2-row board stacking connector with 60 contacts. It features a mating contact pitch of 0.02", insulation resistance of 5G ohm, and dielectric voltage rating of 375VAC. Ideal for applications requiring high durability and reliability in commercial settings, this connector has a temperature range from -55 to 125°C.
1367073-1
TE Connectivity 1367073-1 is a 2-row board connector with 0.031" mating contact pitch. Featuring liquid crystal polymer insulator, it has a max operating temperature of 85°C and -55°C min. Ideal for commercial applications, this female connector offers 20 contacts and surface mount termination.
S4B-XH-A(LF)(SN)
S4B-XH-A(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.098" mating contact pitch, suitable for applications requiring a max operating temperature of 85°C and min of -25°C. It features brass contacts with tin finish, UL94V-0 flammability rating, and insulation resistance of 1Gohm. Ideal for right-angle mounting on boards in various electronic devices.
B04B-PASK(LF)(SN)
B04B-PASK(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" mating contact pitch and 800VAC dielectric voltage. Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, it operates b/w -25 to 85 °C and has UL 94V-0 flammability rating. Ideal for PCB applications requiring high insulation resistance and rated current of 3A.
5023520400
The Molex 5023520400 is a board connector with a mating contact pitch of 0.079 inches and a body length of 0.472 inches. It has an insulation resistance of 1,000,000,000 ohms and is commonly used in commercial applications for its durability and right angle mounting style.
356-022-520-102
Edac
Edac 356-022-520-102 is a 22-contact card edge connector with 0.156" pitch, rated at 5A power. It features a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm. Ideal for board mounting applications in electronics, offering high reliability with UL certification and operating temperatures from -40 to 105°C.
XHP-2-R
XHP-2-R by J S T Mfg is a BOARD CONNECTOR with 2 contacts, UL 94V-0 rated. It features FEMALE contacts for CRIMP termination and is ideal for CABLE mounting applications.
GHR-08V-S
GHR-08V-S by J S T Mfg is an 8-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable connections in electronic devices.
N2520-6002-RB
N2520-6002-RB by 3M is a 20-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin finish, it offers high insulation resistance of 1G ohm and can withstand up to 1400VAC. With a temperature range of -55 to 105°C, this male connector is ideal for PCB mounting in various electronic devices.
746-066-520-601
Edac 746-066-520-601 is a 2-row card edge connector with 66 contacts. It features a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
22-29-2021
Molex 22-29-2021 header connector features 0.1" pitch, 4A signal current rating, and polyamide insulation for durability. Ideal for board connections in commercial applications with UL and CSA standards compliance. Dimensions: 0.2"x.23"x.46", operating temp range of 0-75°C, and matte tin over nickel finish for reliable solder termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
90120-0762
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
90120-0122
The Molex 90120-0122 is a board connector with a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage rating of 1000VAC. It is used in applications requiring a durable male connector with solder termination, suitable for commercial reliability standards.
90120-0763
Molex 90120-0763 is a board connector with 0.1" pitch, suitable for commercial applications. It features bright tin contact finish, 1000VAC dielectric voltage, and 3A signal current rating. Ideal for use in electronics requiring durable male connectors with solder termination.
90121-0766
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 350VDC; No. of Connectors: ONE;
90120-0126
90121-0772
The Molex 90121-0772 is a board connector with 12 contacts, 0.1" pitch, and 3A signal rating. It features a glass-filled polyester insulator, tin contact finish, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable right-angle mounting on PCBs.
90120-0125
90120-0123
90122-0780
Molex 90122-0780 is a 40-contact board connector with 2 rows, 0.1" pitch, and glass-filled polyester insulator. It operates b/w -55°C to 125°C, rated at 3A signal current, and has UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
90120-0956
90121-0763
90120-0128
90121-0922
The Molex 90121-0922 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.2 inch. It has an insulation resistance of 5G ohm and can withstand a dielectric voltage of 350VDC. This connector is commonly used in commercial applications due to its reliability and right angle mounting style.
90123-0112
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Rated Current - Signal: 3 A; Body Width: .1 inch;
90120-0124
90120-0160
90121-0129
The Molex 90121-0129 is a board connector with 9 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage rating of 350VDC. Ideal for commercial applications requiring a right-angle mounting style and solder termination, this connector operates b/w -55°C to 125°C temperature range.
90122-0775
90120-0764
90120-0800
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved