Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 90121-0762 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish contacts, it has an insulation resistance of 5Gohm and can handle up to 3A signal current. Ideal for PCB mounting with right-angle style, this male connector offers reliable performance at temperatures ranging from -55°C to 125°C.
Median Price
$0.580
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Verical
1+ parts
$0.570
100+ parts
-
1k+ parts
$0.560
10k+ parts
$0.490
DigiKey
$0.710
$0.466
Element14
$0.990
$0.649
$0.594
Mouser Electronics
$1.010
$0.704
$0.589
$0.531
PEI Genesis
Chip1Stop
$0.244
Master Electronics
$0.533
Powell Electronics
Farnell
$0.511
TTI
$0.296
$0.282
$0.266
Newark
$0.857
$0.738
TestEquity
$0.340
Nova Conductors
$0.349
Rapid Electronics
$0.453
Digiode
$0.615
TME
$0.950
$0.660
$0.575
IBS Electronics
$0.339
$0.278
Vyrian
J2 Sourcing AB
ComSIT Distribution GmbH
Inventory MP
Bristol Electronics
Vicor Industries, Inc.
Rebound Electronics
VNN
Prism Electronics
Ashlea Components Ltd
Argo Parts USA
$0.344
$0.333
Corphita
$0.582
Continental Prestige Electronics
$0.640
$0.369
$0.365
Andel Nordic
$0.980
$0.685
Assy Fe
Perfect Parts
EMSNET (Excess)
Netroflash
$0.342
$0.332
$0.325
The close proximity of the mating contact pitch allows for a compact design, making this product suitable for applications where space is limited.
The compact body length of 0.2 inch contributes to the overall small footprint of the connector, ideal for tight spaces.
With high insulation resistance, this connector provides reliable electrical insulation, ensuring signal integrity and preventing current leakage.
The high dielectric strength of 350VDC ensures safe operation in high voltage applications, reducing the risk of electrical breakdown.
The tin with nickel barrier contact finish provides corrosion resistance and reliable solder connections, enhancing the durability and longevity of the connector.
This UL flammability rating of 94V-0 indicates that the connector meets stringent fire safety standards, making it a safe choice for various applications.
Headers & Edge Type Connectors 90121-0762 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
90121-0762 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Other - 90121 Series Tooling 06/Mar/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Daco Semiconductor
Pulse Electronics
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
B3B-XH-AM(LF)(SN)
J S T Mfg
B3B-XH-AM(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and UL94V-0 flammability rating. Ideal for board mounting applications in electronics requiring reliable male connectors.
1410189-3
TE Connectivity
TE Connectivity 1410189-3: Headers & Edge Type Connector with 0.07" pitch, LCP insulator, and 1A signal current rating. Ideal for board connections in commercial applications due to its durability, UL certification, and polarization key feature.
43645-0600
Molex
The Molex 43645-0600 is a board connector with 6 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring durable connections, this header connector has a polyester insulator and UL94V-0 flammability rating.
823-22-020-10-001101
Mill-max Mfg
823-22-020-10-001101 by Mill-max Mfg is a board stacking connector with 20 contacts in 2 rows. It features gold over nickel termination, UL94V-0 flammability rating, and solder termination type. Ideal for applications requiring reliable male connectors with straight mounting style.
2-2013289-1
TE Connectivity 2-2013289-1 is a card edge connector with 204 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.024", operates b/w -55 to 85°C, and rated for 0.5A signal current. Ideal for board mounting applications requiring durable connectors with right-angle mounting style.
DM3CS-SF
Hirose Electric
The Hirose Electric DM3CS-SF is a card edge connector with 0.043" mating contact pitch, 500VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings, featuring male compression contacts and a surface mount termination type.
GHR-04V-S
GHR-04V-S by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.049" pitch, POLYBUTYLENE TEREPHTHALATE insulator, and 500VAC dielectric voltage. Ideal for CABLE mounting applications, it has a rated current of 1A and operates b/w -25 to 85°C.
09-50-3031
Molex 09-50-3031 is a board connector with 0.156" mating contact pitch, 0.464"x.25"x.625" body dimensions, and polyamide insulator material. It has 3 contacts, female gender, and bellowed type contact style for cable mounting applications. The UL-approved connector features a natural insulator color and locking mounting option for commercial reliability.
103956-9
TE Connectivity 103956-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features tin/lead finish, polyethylene insulation, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable female connectors with polarization key in black color.
BM04B-GHS-TBT(LF)(SN)
BM04B-GHS-TBT(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE9T insulator, and 500VAC dielectric voltage. Ideal for applications requiring a male connector with surface mount termination, operating b/w -25 to 85 °C, UL-rated for flammability.
TMM-104-01-L-S
Samtec
The Samtec TMM-104-01-L-S is a board connector with 4 contacts, featuring a mating contact pitch of 0.079", termination finish in Tin (Sn) with Nickel (Ni) barrier, and rated current of 3.2A. Ideal for commercial applications, it has an operating temperature range from -55°C to 125°C and insulator material made of Liquid Crystal Polymer.
DF11-14DS-2C(20)
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
VHR-4N-R
BOARD CONNECTOR;
324-91-161-41-002000
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e0; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Contact Material: BERYLLIUM COPPER;
FTSH-107-01-L-DV-K-A
The Samtec FTSH-107-01-L-DV-K-A is a 2-row, 14-contact board connector with Tin-Nickel finish. Operating from -55°C to 125°C, it has a pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in electronics requiring male connectors with straight mounting style.
04T-JWPF-VSLE-S
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; IEC Conformity: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
DF3-6S-2C
DF3-6S-2C by Hirose Electric is a 6-contact board connector with 0.079" pitch, suitable for cables with 22-28 AWG wire sizes. With a dielectric voltage of 650VAC and operating temperatures from -30 to 85°C, it's ideal for commercial applications requiring a reliable signal current of up to 3A.
78800-0001
Molex 78800-0001 is a card edge connector with 0.1" pitch, liquid crystal polymer insulator, and matte tin over nickel finish. It has 6 contacts, rated for 0.5A signal current, and operates b/w -30 to 85°C. Ideal for board mounting applications requiring high insulation resistance and reliable signal transmission.
114-00841-68
Amphenol Communications Solutions
Amphenol's 114-00841-68 PCB connector features a mating contact pitch of 0.043", liquid crystal polymer insulator, and right angle mounting style. With 8 contacts, it is ideal for board mounting applications in commercial settings.
3415
3m Electronic Products Division
CARD EDGE CONNECTOR; DIN Conformance: NO; IEC Conformity: NO; MIL Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
90120-0762
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
90120-0122
The Molex 90120-0122 is a board connector with a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage rating of 1000VAC. It is used in applications requiring a durable male connector with solder termination, suitable for commercial reliability standards.
90120-0763
Molex 90120-0763 is a board connector with 0.1" pitch, suitable for commercial applications. It features bright tin contact finish, 1000VAC dielectric voltage, and 3A signal current rating. Ideal for use in electronics requiring durable male connectors with solder termination.
90121-0766
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 350VDC; No. of Connectors: ONE;
90120-0126
90121-0772
The Molex 90121-0772 is a board connector with 12 contacts, 0.1" pitch, and 3A signal rating. It features a glass-filled polyester insulator, tin contact finish, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable right-angle mounting on PCBs.
90120-0125
90120-0123
90122-0780
Molex 90122-0780 is a 40-contact board connector with 2 rows, 0.1" pitch, and glass-filled polyester insulator. It operates b/w -55°C to 125°C, rated at 3A signal current, and has UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
90120-0956
90121-0763
90120-0128
90121-0922
The Molex 90121-0922 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.2 inch. It has an insulation resistance of 5G ohm and can withstand a dielectric voltage of 350VDC. This connector is commonly used in commercial applications due to its reliability and right angle mounting style.
90123-0112
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Rated Current - Signal: 3 A; Body Width: .1 inch;
90120-0124
90120-0160
90121-0129
The Molex 90121-0129 is a board connector with 9 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage rating of 350VDC. Ideal for commercial applications requiring a right-angle mounting style and solder termination, this connector operates b/w -55°C to 125°C temperature range.
90122-0775
90120-0764
90120-0800
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved