Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 90119-0111 CONTACT features a CRIMP terminal type for 24-22 AWG wires. With a finish thickness of 40, it has a straight mounting style and square pin-socket contact design. Ideal for applications requiring female contacts with cable entries ranging from 0.04 to 0.058 inch.
Median Price
$0.164
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.103
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.151
$0.087
$0.068
Element14
$0.148
$0.117
Newark
$0.173
DigiKey
$0.280
$0.130
RS (Exports)
Mouser Electronics
TTI
Powell Electronics
Heilind Electronics
Verical
Chip1Stop
TTI Europe
Distrelec
Farnell
$0.061
$0.057
Interstate Connecting
$0.184
$0.171
PSC Electronics
Digiode
$0.098
Nova Conductors
NAC Semi
Sensible Micro Corp
Vyrian
IBS Electronics
ECAB
VNN
Semicontronic
$0.085
$0.084
Corphita
$0.093
Netroflash
$0.124
$0.121
Argo Parts USA
$0.126
Continental Prestige Electronics
$0.268
$0.141
$0.110
Andel Nordic
$0.530
$0.368
Aztec Data Supply Inc.
$6.609
Abacus Technologies
Eastek
Perfect Parts
GreenTree Electronics
EMSNET (Excess)
Authorized Procurement Solutions
Kepictronics
The 40 finish thickness ensures durability and longevity of the product, making it a reliable choice for various applications.
Crimp terminals provide a secure connection between wires, ensuring reliable performance and reducing the risk of connectivity issues.
The minimum cable entry size of 0.04 inch allows for compatibility with a wide range of cables, making this product versatile and suitable for different wiring setups.
The use of contacts in this product facilitates the transmission of electrical signals, ensuring seamless communication within an assembly.
Support for a minimum wire size of 24 AWG ensures compatibility with smaller gauge wires, offering flexibility in wiring configurations.
The maximum wire size of 22 AWG allows for compatibility with larger gauge wires, making this product suitable for a wide range of wiring applications.
The maximum cable entry size of 0.058 inch provides compatibility with a variety of cables, offering versatility in wiring installations.
The female contact gender ensures compatibility with male connectors, enabling seamless connections in electronic assemblies.
The straight mounting style simplifies installation and ensures a neat and organized setup, making this product easy to use and maintain.
The square pin-socket contact style offers a secure and reliable connection, reducing the risk of signal loss or interference in electrical setups.
Phosphor bronze is known for its excellent electrical conductivity and corrosion resistance, making it a reliable material choice for electrical contacts.
The terminal length of 0.168 inch provides ample space for wire termination, ensuring a secure and stable connection between wires and contacts.
Assembly Products 90119-0111 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
90119-0111 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Fairchild Semiconductor
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
Surge Components
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
DS18B20
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
M24308/25-9F
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; DIN Conformity: NO; Mounting Option-2: SCREW; MIL-Connector Accessory Name: SCREW ITEM; IEC Conformity: NO; Usage: M24308 SERIES CONNECTOR;
1051430
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
W3S-1939
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Design: POWER AND SIGNAL; Wire Gauge (AWG): 0; Maximum Operating Temperature: 125 Cel; Material: POLYBUTYLENE TEREPHTHALATE;
1735801-1
TE Connectivity's 1735801-1 CONTACT is a FEMALE signal connector with rated voltage of 250V and current of 3A. It supports wire gauge from 30 to 24 AWG, operating temperatures from -25 to 105 °C, and is ideal for applications requiring DISCRETE WIRE connections like part numbers 1735447 and 2041423.
12124582
Delphi Connection Systems
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Minimum Cable Entry: .075 inch; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN;
5-962885-1
TE Connectivity 5-962885-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 22 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and cable entry from 0.043" to 0.063", operating b/w -40°C to 140°C temperature range.
SXA-001T-P0.6L
J S T Mfg
SXA-001T-P0.6L by J S T Mfg is a CRIMP terminal CONTACT with 3A rated current, suitable for XA CONNECTOR applications. It has approvals from CSA, TUV, and UL, with a temperature range of -25 to 85 °C. The FEMALE contact is made of PHOSPHOR BRONZE material and supports wire sizes from 26 to 22 AWG.
33000-1003
Molex
Molex 33000-1003 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can handle up to 10A current at 500V DC. With operating temperatures from -40°C to 105°C, it accommodates wire sizes up to 22 AWG in straight mounting applications.
33012-3001
Molex 33012-3001 is a CRIMP terminal CONTACT for MX150 CONNECTOR, with 16-14 AWG wire size range and 22A rated current. Made of COPPER ALLOY, it has a contact resistance of 8 mohm and operates b/w -40 to +105 °C.
5318201
Altech
CONNECTOR ACCESSORY; Maximum Operating Temperature: 120 Cel; DIN Conformity: NO; Material: GLASS FILLED POLYAMIDE6; Additional Features: IP68; Minimum Operating Temperature: -30 Cel;
16-02-0109
CONNECTOR ACCESSORY;
13697408
Aptiv
Aptiv 13697408 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has 0.0551-0.0748 inch cable entry range. Ideal for applications requiring MALE contact gender in Assembly Products category.
316400-1
TE Connectivity 316400-1 CONTACT features crimp terminal type, rated 3A current at 50V DC voltage. With a finish thickness of 7.87mm, it is ideal for signal design applications with wire gauge ranging from 20 to 22 AWG.
0460-202-1631
TE Connectivity's 0460-202-1631 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 150 °C, suitable for wire gauges 16-20 AWG. With a rated current of 13 A, it is commonly used in male contact applications requiring a straight mounting style and round pin-socket contact design.
02-08-1004
Molex 02-08-1004 is a CRIMP CONTACT FEMALE terminal made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
204370-2
TE Connectivity's 204370-2 is a CRIMP terminal CONTACT for 2221860 SERIES CONNECTOR with finish thickness of 50, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a rated current of 5 A and operates b/w -55 °C to 125 °C, making it ideal for SIGNAL applications requiring male contact gender.
5016471000
Molex 5016471000 is an IGRID receptacle housing with stamped contact design. It supports wire sizes from 26-22 AWG, rated for 250V AC/DC and 2A current. Ideal for signal applications, featuring copper alloy material and straight mounting style.
SPUD-001T-P0.5
SPUD-001T-P0.5 by J S T Mfg is a UL approved CONTACT with CRIMP terminal type, rated for 250V AC/DC, 3A current. Ideal for applications requiring FEMALE contacts with wire sizes ranging from 26-22 AWG and operating temperatures of -25 to 85°C.
HD30-24BT-BK
CONNECTOR ACCESSORY; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -29 Cel; Wire Gauge (AWG): 0; Material: POLYVINYLCHLORIDE; Maximum Wire Size: 0 AWG;
AWM-2SA
Amphenol
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
90119-2110
Molex 90119-2110 is a female contact with square pin-socket design. It supports wire sizes from 24 to 22 AWG and has a terminal length of 0.168 inch. Ideal for applications requiring crimp terminals in straight mounting style with finish thickness of 25.
90119-0109
CONNECTOR ACCESSORY; Minimum Wire Size: 24 AWG; Contact Gender: FEMALE; Terminal Type: CRIMP; Assembly Item Name: CONTACT; Minimum Cable Entry: .04 inch;
90119-0110
The Molex 90119-0110 is a C-GRID IIITM modular crimp housing with finish thickness of 15. It features compression contact style for female gender contacts, suitable for signal design. This assembly product supports wire sizes from 22 AWG to 24 AWG and cable entries ranging from 0.04" to 0.058", ideal for various electronic applications.
90119-2109
Molex 90119-2109 CONTACT features CRIMP terminals for 24-22 AWG wires. Designed for SIGNAL applications, with FEMALE contact gender and STRAIGHT mounting style. Ideal for assemblies requiring 0.04-0.058 inch cable entry.
90119-2111
CONNECTOR ACCESSORY; Minimum Cable Entry: .04 inch; Contact Style: SQUARE PIN-SOCKET; Terminal Type: CRIMP; Finish Thickness: 40; Additional Features: MATING: GOLD, TERMINATION: TIN (200), UNDERPLATING THICKNESS: NICKEL (70);
90119-2121
CONNECTOR ACCESSORY; Material: PHOSPHOR BRONZE; Maximum Cable Entry: .048 inch; Terminal Length: .168 inch; Minimum Wire Size: 28 AWG; IEC Conformity: NO;
90119-0120
The Molex 90119-0120 is a crimp terminal with a finish thickness of 100. It is used as a connector accessory in assembly products, featuring a square pin-socket contact style and made of phosphor bronze material. Its min wire size is 28 AWG and max cable entry is 0.048 inch.
90119-0122
Molex 90119-0122 CONTACT features CRIMP terminal type, suitable for 26-28 AWG wires. With 0.03-0.048 inch cable entry, it is ideal for straight mounting applications. Made of PHOSPHOR BRONZE, this FEMALE contact has a SQUARE PIN-SOCKET design.
90119-0121
Molex 90119-0121 CONTACT features CRIMP terminal type, suitable for 26-28 AWG wires. With a finish thickness of 25, it is ideal for applications requiring FEMALE contact gender and STRAIGHT mounting style. Max cable entry of 0.048 inch makes it versatile for various assembly products.
90119-2120
CONNECTOR ACCESSORY; Minimum Cable Entry: .03 inch; Material: PHOSPHOR BRONZE; MIL Conformity: NO; Finish Thickness: 40; Contact Design: LOOSE;
90119-2122
Molex 90119-2122 is a female contact with square pin-socket design. It supports wire sizes from 28 to 26 AWG and has a terminal length of 0.168 inch. Ideal for applications requiring crimp terminals in assembly products.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved