Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Insulator Material: POLYCARBONATE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Andel Nordic
$1.060
$0.745
Corphita
Telecom & Datacom Connectors 90075-0009 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Body Depth:
Body Length:
Body or Shell Style:
Cable Types:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
90075-0009 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Taitron Components
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Shandong Yiguang Electronic Joint Stock
Alpha & Omega Semiconductor
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
1-5749111-0
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN OVER NICKEL; UL Flammability Code: 94V-0; Termination Type: IDC;
2007435-1
TE Connectivity
TE Connectivity 2007435-1 is a Telecom & Datacom Connector with 0.303" body length, 0.646" width, and 0.909" depth. It has 19 contacts, POLYETHYLENE insulator material, and operates b/w -20°C to 85°C. Ideal for board mounting applications in telecom and datacom systems.
2130830005
Molex
TELECOM AND DATACOM CONNECTOR;
MUC-20PFFR-JS8A02
Amphenol
USB CONNECTOR;
5749699-7
TE Connectivity 5749699-7 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. Ideal for commercial applications, it has a temperature range of -55 to 105°C and offers high durability with 800 cycles.
MTCC2R-020-020-01
TE Connectivity's MTCC2R-020-020-01 is a 3" telecom connector with 5000000000 ohm insulation resistance and 2121VAC dielectric voltage. It operates b/w -65 to 125 °C, UL-rated for 5A current, crimp termination, and nickel finish. Ideal for telecom & datacom applications requiring reliable signal connections.
09454521920
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1-2201855-1
TE Connectivity 1-2201855-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. It has 8 contacts, male gender, and insulation resistance of 500MΩ. Ideal for telecom and datacom applications due to its durability, polarization key feature, and copper alloy shell material.
1735284-2
TE Connectivity 1735284-2 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and 22 contacts. It operates b/w -40 to 85°C, suitable for telecom applications requiring a rated current of 1.5A. The connector features a polarized key, UL flammability rating of 94V-0, and surface mount termination.
SS-7188S-A-NF-1-50
Bel Fuse
Bel Fuse SS-7188S-A-NF-1-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for board mounting at a pitch of 2.54mm. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
ZX80-B-5P(30)
Hirose Electric
ZX80-B-5P(30) by Hirose Electric is a USB connector with 5 contacts, gold finish, and liquid crystal polymer insulator. It is used in telecom & datacom applications for board and panel mounting due to its nickel shell and stainless steel material. The connector has a UL flammability rating of 94V-0.
6116522-1
TE Connectivity 6116522-1 is a Telecom & Datacom Connector with EMI shielding, 8 contacts, and insulation resistance of 500M ohm. It has a body length of 1.31", suitable for panel mounting applications in telecom and datacom equipment. The connector features a right-angle mounting style and solder termination, ensuring durability with 750 cycles lifespan.
USB4055-30-A
Global Connector Technology
USB4055-30-A by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ, suitable for telecom/datacom applications. With a durable design lasting up to 10,000 cycles, this right-angle receptacle has a surface mount termination type and operates b/w -40°C to 85°C.
ARJM11D7-502-AB-EW2
Abracon
Abracon's ARJM11D7-502-AB-EW2 is a Telecom & Datacom Connector with 8 contacts, gold finish, and polarized housing. It has a body size of 0.626" x 0.543" x 0.839", operates b/w -40°C to 85°C, and features staggered PCB contact pattern. Ideal for board mounting in telecom and datacom applications.
RJE60-188-5401
Amphenol RJE60-188-5401 is a Telecom & Datacom Connector with 8 contacts, rated at 1.25A signal current. It features a dielectric voltage of 1400VAC and insulation resistance of 500MΩ. Ideal for telecom applications requiring right-angle mounting and solder termination.
IX80G-A-10P
IX80G-A-10P by Hirose Electric is a Telecom & Datacom Connector with GOLD contact finish, POLYAMIDE insulator, and TIN shell. It has 10 contacts, suitable for BOARD AND PANEL mounting in applications like TELECOM AND DATACOM. Compatible mating connector: IX30G-A-10S-CV(7.0).
TDS8PC5
Infinite Electronics International
TDS8PC5 by Infinite Electronics International is a Telecom & Datacom Connector with dimensions of 0.46" x 0.26" x 0.66". It features Phosphor Bronze contacts, Polycarbonate insulator, and Brass shell material suitable for IDC termination in telecom applications. Rated for 1.5A signal current, UL certified, and supports wire sizes from 24-26 AWG.
USB-RS232-WE-1800-BT_3.3
FTDI
USB-RS232-WE-1800-BT_3.3 by FTDI is a USB connector with 4 contacts, male gender, and plug body style. It features a filter, cable assembly option, and is suitable for Telecom & Datacom applications.
RJHSE-5380
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: .65 inch; MIL Conformity: NO;
J1B1211CCD
Wiznet
J1B1211CCD by Wiznet is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and NICKEL shell finish. It has a PCB contact row spacing of 2.54mm and operates b/w -40 to 85°C. Ideal for board and panel mounting in telecommunications and data communication applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved