Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 76866-1011 is a Telecom & Datacom Connector with GLASS FILLED POLYETHYLENE insulator. Features 36 contacts, UL 94V-0 flammability rating, and FEMALE contact gender. Ideal for board and panel mounting in right angle configuration for telecom and datacom applications.
Median Price
$16.634
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$20.360
100+ parts
$15.080
1k+ parts
-
10k+ parts
Verical
$12.908
Nova Conductors
Digiode
$19.332
VNN
Vyrian
Chip Stock
K-1 Technologies
Component Sense
TME
$14.360
Prism Electronics
First Choice Components Inc.
Sensible Micro Corp
Electronics Depot
Aztec Data Supply Inc.
$5.606
AZTECH Wire
$10.555
Continental Prestige Electronics
$16.240
$13.590
Corphita
$18.315
Andel Nordic
$20.310
$14.214
Semicontronic
$23.880
$23.283
$23.164
Kepictronics
Eastek
Argo Parts USA
Netroflash
$14.778
$14.326
$14.024
Abacus Technologies
Perfect Parts
Speed Components Ltd (Excess)
The use of glass filled polyethylene as the insulator material provides high durability and resistance to heat, making the connector reliable for long term use in various environments.
Specifically designed for telecom and datacom applications, ensuring optimal performance and compatibility with telecommunications equipment and systems.
Having a UL flammability rating of 94V-0 means that this connector meets the industry standard for fire safety, providing peace of mind in case of potential fire hazards.
With 36 contacts available, this connector allows for multiple connections and signal transmissions, making it suitable for complex telecom and datacom setups.
The versatility of board and panel mounting options makes installation and integration of this connector into existing systems convenient and efficient.
The press fit termination type ensures a secure and reliable connection, reducing the risk of signal loss or disconnection during operation.
The female contact gender design offers compatibility with male connectors, allowing for easy and reliable connections in telecom and datacom applications.
The right angle mounting style provides flexibility in installation and space-saving benefits, making it ideal for applications where limited space or specific orientation is required.
Telecom & Datacom Connectors 76866-1011 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
76866-1011 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 76866 Series Design 16/Oct/2015 Drawing 26/Mar/2019
PCN Assembly/Origin - 768661y1y Material Manufacture 13/Dec/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
Grande Electronics
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
749195-2
TE Connectivity
TE Connectivity's 749195-2 is a EMI shielded connector with 68 contacts, nickel finish, and zinc alloy shell. Ideal for telecom/datacom applications, it features IDC termination, male contact gender, and UL94V-0 flammability rating.
5-2301996-5
TE Connectivity 5-2301996-5 is a telecom & datacom connector with EMI shielding, LCP insulator, and tin termination. It has 8 contacts, UL94V-0 flammability rating, and operates b/w -40°C to 85°C. Ideal for board mounting applications in telecommunications and data communication systems.
ZX62D-AB-5P8(30)
Hirose Electric
Hirose Electric's ZX62D-AB-5P8(30) USB connector features gold termination, 85°C max operating temp, and 1.8A signal current. Ideal for telecom/datacom applications, with male contact gender, right angle mounting style, and locking option for surface mount PCBs.
MRJ-5381-M1
Amphenol
Amphenol MRJ-5381-M1 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. It features gold over nickel mating contact finish, polyethylene insulator material, and staggered PCB contact pattern. Ideal for commercial applications requiring durable connectors with high insulation resistance and wide operating temperature range from -40 to 105°C.
5-2337992-5
TE Connectivity 5-2337992-5 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40°C to 85°C, and mounts on a board lock for right-angle installation.
5607-4200-SH
3m Electronic Products Division
5607-4200-SH by 3M is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for board mounting applications in telecom and datacom systems, featuring a male plug body style with surface mount termination.
MRJR-5384-B1
Amphenol MRJR-5384-B1 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. Featuring a zinc alloy shell, it has a body size of 1.193" x 0.709" x 1.115". Ideal for board mounting with solder termination, this UL-rated connector operates b/w -40°C to +105°C.
1051640001
Molex
Molex 1051640001 USB connector with 5 contacts, gold finish, and liquid crystal polymer insulator. Ideal for telecom & datacom applications requiring surface mount board mounting in a right angle receptacle design. Stainless steel shell with matte tin finish ensures durability and reliability.
921
Keystone Electronics
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Minimum Operating Temperature: -25 Cel;
2041126-1
TE Connectivity's 2041126-1 is a Telecom & Datacom Connector with EMI shielding, 0.45" body depth, and polyethylene insulator. It operates b/w -40 to 85°C, has 8 contacts, and a nickel-finished brass shell. Ideal for telecom and datacom applications requiring surface mount termination on boards.
RJHSE-5080-A2
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
2294415-1
TE Connectivity 2294415-1 is a Telecom & Datacom Connector with EMI shielding. It features Liquid Crystal Polymer insulator, 8 contacts, and 1.5A signal current rating. Ideal for board mounting applications in telecom and datacom systems.
1734099-7
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Insulator Material: LIQUID CRYSTAL POLYMER; Filter Feature: NO;
74960-3018
Molex 74960-3018 is a Telecom & Datacom Connector with 18 contacts, Tin finish, and Polyethylene insulator. Ideal for surface mount board applications in telecom and datacom systems due to its female contact gender and right angle mounting style.
2301995-3
TE Connectivity's 2301995-3 is a Telecom & Datacom Connector with EMI shielding. Featuring LCP insulator, it has 8 contacts and operates b/w -40 to 85°C. Ideal for board mounting applications due to its BOARD LOCK option.
5520425-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: TOP ENTRY; Termination Type: SOLDER; Manufacturer Series: 5520425;
48204-0001
The Molex 48204-0001 USB connector features gold termination, glass-filled polyethylene insulator, and phosphor bronze contact material. Ideal for telecom/datacom applications, with a dielectric voltage of 500VAC and operating temperatures from -55 to 85°C. It offers a durable design with solderable retention clips for board mounting in commercial settings.
5555167-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; DIN Conformance: NO; Filter Feature: NO;
47659-1102
Molex 47659-1102 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator, Nickel shell finish, and Brass shell material. It has 19 contacts for surface mount termination on board. Ideal for telecom and datacom applications requiring female contact gender in straight mounting style.
440500003
Molex 440500003 is a telecom & datacom connector with dielectric voltage of 1000VAC. It features matte tin over nickel termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for board and panel mounting applications in telecommunications and data communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
76866-1013
The Molex 76866-1013 is a telecom and datacom connector with 144 contacts. It features a glass-filled polyethylene insulator material and has a UL flammability code of 94V-0. This right-angle mounting connector is suitable for board and panel applications.
76867-1011
The Molex 76867-1011 is a Telecom & Datacom Connector with 36 contacts, TIN finish, and GLASS FILLED POLYETHYLENE insulator. It is a right-angle board mount connector ideal for telecom and datacom applications requiring female contact gender and press-fit termination.
76867-0012
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; DIN Conformance: NO; Body or Shell Style: PLUG;
76867-0013
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Mixed Contacts: NO; Mounting Style: RIGHT ANGLE;
76867-0011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Insulator Material: GLASS FILLED POLYETHYLENE;
76866-0011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; UL Flammability Code: 94V-0; Mounting Type: BOARD;
768630001
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; JESD-609 Code: e0; Total No. of Contacts: 160;
76866-1015
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 72; Mounting Type: BOARD AND PANEL; Insulator Material: GLASS FILLED POLYETHYLENE;
76867-1012
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: NOT APPLICABLE; Empty Shell: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
76867-1013
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; DIN Conformance: NO; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved