Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Andel Nordic
$0.880
$0.613
Corphita
Telecom & Datacom Connectors 75783-0308 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
Minimum Withdrawal Force (N):
75783-0308 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
4554
Jw Miller Magnetics
Other Semiconductors;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
Vishay Intertechnology
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
Kingwell Technonlogy
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
54602-908LF
Amphenol Communications Solutions
54602-908LF by Amphenol is a telecom & datacom connector with 0.602" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in applications requiring a durable, right-angle female jack connector with solder termination and UL certification.
438146621
Molex
Molex 438146621 is a telecom & datacom connector with 0.95" body length, 0.5" width, and 0.65" depth. It has 12 contacts, matte tin over nickel finish, and glass filled nylon insulator. Ideal for board and panel mounting in applications requiring high insulation resistance of 500000000 ohm and dielectric voltage of 1000VAC.
USB3145-30-1-A
Global Connector Technology
USB3145-30-1-A by Global Connector Technology is a USB connector with 5 contacts, rated for 1A signal current. It features a dielectric voltage of 500VAC and insulation resistance of 1Gohm, suitable for telecom & datacom applications. With a durable design lasting up to 10,000 cycles, it offers reliable performance in commercial settings.
UC-31PFFH-QF7001
Amphenol
USB CONNECTOR;
2250015-3
Bel Fuse
Bel Fuse's 2250015-3 is a telecom and datacom connector with a nickel shell finish and polyethylene insulator material. It features 8 contacts, solder termination type, and a jack body style. This connector is suitable for board and panel mounting in applications requiring UL 94V-0 flammability code compliance.
47018-2000
The Molex 47018-2000 is a telecom & datacom connector with 22 contacts, gold termination finish, and glass-filled plastic insulator. It has a dielectric voltage of 500VAC and operates b/w -35 to 85°C. Ideal for board mounting applications requiring high insulation resistance and polarization key for secure connections.
RJHSE-5E80
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: GOLD OVER NICKEL (50); JESD-609 Code: e3; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE;
6-555174-2
Commscope
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
10220-1210PE
3m Electronic Products Division
10220-1210PE by 3M is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 707VAC. Ideal for board and panel mounting in telecom and datacom applications due to its gold-plated contacts, glass-filled polyester insulator, and operating temperature range from -55°C to 105°C.
10029449-111RLF
The Amphenol Communications Solutions 10029449-111RLF is a Telecom & Datacom Connector with 0.59" body length, 100000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for telecom and datacom applications, this connector features POLYETHYLENE insulator material, FLASH plating, and a rated current of 0.5A.
292304-2
TE Connectivity
TE Connectivity's 292304-2 is a USB connector with a body length of 0.474", body width of 0.435", and body depth of 0.619". It is commonly used in telecom and datacom applications, offering a rated current of 1A, durability of 1500 cycles, and a min withdrawal force of 9.7856N.
ZX62R-B-5P(30)
Hirose Electric
ZX62R-B-5P(30) by Hirose Electric is a USB connector with 5 contacts, gold finish with nickel barrier, and liquid crystal polymer insulator. It is used in telecom & datacom applications for board and panel mounting due to its stainless steel shell and right-angle mounting style.
940-SP-3088R-A133
The Bel Fuse 940-SP-3088R-A133 is a telecom & datacom connector with dimensions of 0.46" x 0.312" x 0.885". It features a polycarbonate insulator, 50u plating thickness, and UL 94V-0 flammability code. This plug connector has 8 contacts, IDC termination type, and is suitable for commercial telecom and datacom applications.
74320-1004
Molex 74320-1004 is a Telecom & Datacom Connector with 0.075" pitch, 1.45" body length, and 1000000000 ohm insulation resistance. Ideal for board and panel mounting in telecom and datacom applications due to its gold termination finish, brass contact material, and UL reference standard compliance.
09455511103
Harting Electronics & Kg
09455511103 by Harting Electronics & Kg is a Telecom & Datacom Connector with insulator made of plastic. It has 8 contacts, rated at 1.5A signal current, and operates b/w -40 to 70°C. Ideal for commercial applications, this connector offers durability of 750 cycles and features a straight mounting style with solder termination.
ARJM11D7-009-AB-EW2
Abracon
Abracon's ARJM11D7-009-AB-EW2 is a telecom and datacom connector with a body length of 0.626", width of 0.543", and depth of 0.839". It features gold termination contact finish, a max operating temperature of 85°C, and a PCB contact row spacing of 2.54mm. This connector is commonly used in telecommunications and data communication applications for its polarized housing, right angle mounting style, and female contact gender.
2-5174225-5
TE Connectivity 2-5174225-5 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a body length of 2.516", insulation resistance of 1G ohm, and operates b/w -55°C to 105°C. Ideal for telecom/datacom applications requiring high reliability and signal current up to 1A in commercial settings.
6-2301994-2
TE Connectivity 6-2301994-2 is a EMI shielded connector with 0.537" body depth and liquid crystal polymer insulator. It has 8 contacts, solder termination, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications requiring board mounting with nickel finish shell.
USB4105-GF-A-
USB4105-GF-A- by Global Connector Technology is a USB connector with 24 contacts, rated for 5A signal current. It features liquid crystal polymer insulation, matte tin over nickel finish, and stainless steel shell material. Ideal for telecom & datacom applications, it has a dielectric voltage of 100VAC and operates b/w -40 to 85°C.
47590-1001
47590-1001 by Molex is a USB connector with 5 contacts, made of brass and housed in a stainless steel shell. It has a liquid crystal polymer insulator and matte tin finish. This right-angle receptacle is commonly used in telecom and datacom applications for surface mount board mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved