Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73403-5762 SSMB Connector features 50 ohm impedance, 6 GHz frequency, and 1.3 VSWR. Ideal for RF applications with RG174/RG316 cables, operating from -40 to 105°C. Snap coupling type with nickel finish, suitable for high durability in cable assemblies.
Median Price
$0.989
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Digiode
Netroflash
$0.969
$0.940
$0.920
AZTECH Wire
$6.006
Andel Nordic
$6.507
$6.247
Corphita
Compact size allows for easy installation in tight spaces.
High insulation resistance ensures reliable performance and signal integrity.
Slim design suitable for compact electronic devices.
High dielectric strength for safe and efficient operation.
Provides ample space for secure cable connections.
Snap coupling for quick and easy mating of connectors.
Durable and reliable insulator material.
Can withstand high temperatures for extended periods.
Suitable for use in a wide range of temperature conditions.
Provides corrosion resistance for long-lasting performance.
Specific connector type for compatibility with various devices.
Low VSWR for efficient signal transmission.
Can withstand multiple connection cycles without degrading performance.
Easy to mount on cables for quick installation.
Matches standard impedance for optimal signal transfer.
Convenient option for customers requiring a complete solution.
Durable shell material for long-term use.
Compatible with popular cable types for versatile applications.
Secure termination method for stable connections.
Male contact for compatibility with female connectors.
Low contact resistance for high conductivity.
Jack style for easy connection with compatible plugs.
Straight mounting style for simple installation.
Coaxial contact design for efficient signal transmission.
High-frequency capability for versatile use cases.
SSMB Connectors 73403-5762 attributes and parameters. Explore more SSMB Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
Insulation Resistance:
Insulator Material:
Mating Info.:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73403-5762 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
DS18B20Z+T&R
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Electronics
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
903-415J-51P
Amphenol 903-415J-51P is a SSMB connector with 0.3 dB insertion loss, 50 ohm impedance, and 1400VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features gold-plated contacts, PTFE insulator, and brass shell for durability in commercial settings.
5414337-1
TE Connectivity
TE Connectivity's 5414337-1 RF SMB Connector features 0.3 dB Insertion Loss, SNAP Coupling Type, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for applications requiring a 50 ohm Characteristic Impedance, this connector operates b/w -65 to 165 °C with a max frequency of 4 GHz.
73100-0103
Molex
73100-0103 by Molex is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 1.3 VSWR. Ideal for board mounting in applications up to 4 GHz requiring reliable commercial-grade connectors with gold/nickel finish and PTFE insulator.
142212
Amphenol 142212 is an RF SMB connector with gold finish, suitable for 50 ohm impedance. It features a snap coupling type and polytetrafluoroethylene insulator material. Ideal for cable mounting applications requiring a female contact gender in a straight plug configuration.
142138
Amphenol 142138 is an RF SMB Connector with GOLD finish, POLYTETRAFLUOROETHYLENE insulator. It has SNAP coupling, suitable for BOARD mounting. Ideal for applications requiring reliable MALE contact in JACK body style.
1-1337478-0
TE Connectivity 1-1337478-0 is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 4 GHz max operating frequency. Ideal for applications requiring high-frequency signal transmission in environments with temperatures ranging from -65 to 165 °C. Suitable for KX 22A and KX 3B cable types, featuring a right-angle mounting style.
FA1-NZSP-C01-0
FA1-NZSP-C01-0 by Amphenol is an RF SMB connector with a nickel shell finish, suitable for RG-174/U cable termination. Its brass shell and PTFE insulator make it ideal for commercial applications requiring reliable female coax connections. The crimp termination and straight plug design offer secure locking mounting options.
903-367P-51A2
Amphenol 903-367P-51A2 is a RF SMB connector with 0.3 dB insertion loss, 1.5 VSWR, and 50 ohm impedance. It features gold termination finish, MIL conformity, and PTFE insulator material. Ideal for applications up to 4 GHz requiring snap coupling and right-angle mounting on cables with crimp termination.
414002-3
TE Connectivity's 414002-3 SSMB Connector features 0.25" body diameter, 1000000000 ohm insulation resistance, and 0.3 dB insertion loss. Ideal for RF applications with a max operating frequency of 4 GHz, this connector is designed for durability with a shell material of brass and termination type of crimp.
R125.680.000W
Radiall S A
R125.680.000W by Radiall S A is a RF SMA CONNECTOR with 1 port and 50 ohm characteristic impedance. It has a body length of 0.248 inch, insulation resistance of 5GΩ, and insertion loss of 0.07 dB. This connector is commonly used in commercial applications requiring durability, such as in board mounting for frequencies up to 18 GHz.
R114.163.000
R114.163.000 by Radiall S A is an RF SMB CONNECTOR with 1 dB Insertion Loss, GOLD OVER NICKEL Termination Contact Finish, and SNAP Coupling Type. It has a max operating frequency of 4 GHz and is ideal for applications requiring a 50 ohm characteristic impedance, such as cable mounting in right angle configurations.
73403-5112
RF SMB/SSMB Connectors; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
1-1337604-0
TE Connectivity 1-1337604-0 is a RF SMB Connector with 50 ohm impedance, suitable for applications up to 4 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator and GOLD finish, it has a temperature range of -65 to 165 °C. Ideal for board mounting, this FEMALE connector has a STRAIGHT JACK body style.
414002-1
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mounting Style: RIGHT ANGLE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
903-499J-51P2
Amphenol 903-499J-51P2 is a SSMB connector with 0.3 dB insertion loss, 50 ohm impedance, and 1400VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features gold-plated brass contacts and PTFE insulator for durability in commercial settings.
2291392-3
TE Connectivity's 2291392-3 is an EMI shielded SSMB connector with dielectric voltage of 800VAC. With a characteristic impedance of 50 ohm, it operates up to 6 GHz. Ideal for RF applications, this right-angle SMB connector has a zinc alloy shell and solder termination.
11.2520.001
Ims Connector Systems
11.2520.001 by Ims Connector Systems is a RF SMB connector with a characteristic impedance of 50 ohm and rated current of 1.5 A, suitable for applications requiring a max operating frequency of 4 GHz. With MIL conformity and durability up to 500 cycles, it features a right angle mounting style and female contact gender for reliable signal transmission in board-mounted setups.
131-3711-201
Ef Johnson
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Mating Contact Finish: GOLD (30); MIL Conformity: NO;
1060464-1
TE Connectivity's 1060464-1 SSMB Connector features a body size of 0.25" x 0.25" x 0.525", PTFE insulation, and gold shell finish. Ideal for RF applications with a characteristic impedance of 50 ohm, operating up to 4 GHz. Suitable for commercial use with durability of 500 cycles in board mounting configurations.
131-3701-411
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73404-0573
73403-6287
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Finish: NICKEL; Insulator Material: POLYPROPYLENE; Filter Feature: NO;
73404-0570
73403-6283
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; No. of Ports: 1; Body Depth: .669 inch;
73404-0572
73403-5765
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; Total No. of Contacts: 1; Termination Type: CRIMP;
73403-5766
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; Mounting Style: STRAIGHT; Total No. of Contacts: 1;
73403-5768
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; Maximum Operating Temperature (Cel): 105; Mounting Style: STRAIGHT;
73403-5769
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; Mounting Style: STRAIGHT; Body Width: .374 inch;
73403-5771
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; Panel Mount: NO; Shell Material: BRASS;
73403-5772
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; Body or Shell Style: JACK; Panel Mount: NO;
73403-5773
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Ports: 1; Minimum Operating Temperature: -40 Cel;
73403-6952
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Body Width: .374 inch; Maximum Operating Frequency: 6 GHz; Insulator Material: POLYPROPYLENE;
73403-5760
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: COAX; Mounting Type: CABLE; Mating Contact Finish: NOT APPLICABLE;
73403-5761
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Ports: 1; Contact Material: NOT APPLICABLE;
73403-5763
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; Cable Types: RG174, RG316; Filter Feature: NO;
73403-5764
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; Maximum Operating Temperature (Cel): 105; Mounting Type: CABLE;
73403-6293
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: .374 inch; Termination Type: CRIMP; Mating Contact Finish: NOT APPLICABLE;
73403-6280
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 6 GHz; Body or Shell Style: JACK; Insulator Material: POLYPROPYLENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved