Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73403-6287 is a RF SMB connector with characteristic impedance of 50 ohm, operating up to 6 GHz. It has a nickel-finished brass shell and polypropylene insulator, suitable for RG174 and RG316 cables. The snap-coupling type connector is commonly used in applications requiring high-frequency signal transmission.
Median Price
$2.180
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.700
1k+ parts
$1.220
10k+ parts
$1.090
Nova Conductors
$2.460
-
Vyrian
Digiode
VNN
Netroflash
$2.411
Andel Nordic
$7.276
$6.985
AZTECH Wire
$9.647
Corphita
Compact size allows for easy integration into various systems and assemblies.
Small footprint makes it suitable for applications with limited space.
Provides a sturdy and secure connection while still maintaining a compact design.
Snap-on coupling allows for quick and easy mating and unmating of connectors.
Polypropylene provides excellent insulation properties and durability for reliable performance.
Nickel finish offers corrosion resistance and a professional look.
Designed for RF applications, ensuring efficient signal transmission.
Suitable for cable installations, providing flexibility and ease of use.
Matches common RF cables and components for optimal signal transfer.
Brass construction offers durability and electrical conductivity for reliable performance.
Compatible with commonly used RF cables, offering versatility in connectivity options.
Crimp termination ensures a secure and reliable connection without soldering.
Male gender is common in RF applications, providing compatibility with various systems.
Jack style allows for easy mating with female connectors, increasing versatility.
Straight mounting simplifies installation and alignment in systems and assemblies.
Coaxial contact style ensures efficient signal transmission with minimal loss.
Suitable for high-frequency applications up to 6 GHz, providing reliable performance in demanding environments.
SSMB Connectors 73403-6287 attributes and parameters. Explore more SSMB Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
Filter Feature:
Insulator Material:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
73403-6287 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
131-3303-501
Bel Fuse 131-3303-501 is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications requiring durable connectors with 4 GHz frequency support. Features include POLYTETRAFLUOROETHYLENE insulator, BRASS shell material, and -65 to 165 °C operating temperature range.
2011260002
Molex
The Molex 2011260002 is a SSMB connector with a body length of 0.394 inch, body width of 0.372 inch, and body depth of 0.768 inch. It is commonly used in RF applications with a max operating frequency of 6 GHz and characteristic impedance of 50 ohm.
1-1337478-0
TE Connectivity
TE Connectivity 1-1337478-0 is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 4 GHz max operating frequency. Ideal for applications requiring high-frequency signal transmission in environments with temperatures ranging from -65 to 165 °C. Suitable for KX 22A and KX 3B cable types, featuring a right-angle mounting style.
414002-2
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Type: CABLE; Voltage Standing Wave Ratio: 1.51;
1060469-1
TE Connectivity's 1060469-1 SSMB Connector features a snap coupling type, PTFE insulator material, and gold shell finish. With a characteristic impedance of 50 ohm and max operating frequency of 4 GHz, it is ideal for RF applications requiring reliable performance in commercial settings. The right-angle mounting style with solder termination makes it suitable for board mounting in various electronic devices.
142321
Amphenol
The Amphenol 142321 is an RF SMB connector with a gold shell finish and PTFE insulator. It is a female coax plug suitable for semi-rigid cables, solder termination, and panel mounting. This commercial-grade connector offers reliable performance in various applications requiring secure locking connections.
903-499J-51P2
Amphenol 903-499J-51P2 is a SSMB connector with 0.3 dB insertion loss, 50 ohm impedance, and 1400VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features gold-plated brass contacts and PTFE insulator for durability in commercial settings.
413985-1
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Coupling Type: SNAP; DIN Conformance: NO;
R114665000
Radiall S A
The Radiall S A R114665000 SSMB Connector features 0.5 dB insertion loss, 1.2 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it offers gold termination with nickel barrier for reliable signal transmission in board and panel mounting setups.
TE Connectivity's 413985-1 SSMB Connector features 0.3 dB Insertion Loss, SNAP Coupling Type, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 4 GHz with 50 ohm impedance, it supports RG 316, RG 188, and RG 174 cables in temperatures ranging from -65 to 165 °C.
142146
Amphenol 142146 is a RF SMB connector with 0.6 dB insertion loss, 50 ohm impedance, and 4 GHz operating frequency. Ideal for commercial applications, it features gold termination finish, PTFE insulator material, and right-angle mounting style.
142252
Amphenol 142252 is an RF SMB connector with gold finish, snap coupling, and PTFE insulator. Ideal for cable mounting with crimp solder termination, male contact gender, and right angle mounting style. Perfect for applications requiring reliable RF connections in compact spaces.
131-3693-116
Cinch Connectivity Solutions
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Panel Mount: NO; Mounting Style: RIGHT ANGLE;
R114.003.000
The Radiall S A R114.003.000 SSMB Connector features 0.5 dB insertion loss, gold (Au) termination with Ni barrier, and SNAP coupling type. Ideal for RF applications up to 4 GHz, this male plug connector has a VSWR of 1.46 and 50 ohm impedance, suitable for cable mounting with clamp termination.
1-2291392-3
TE Connectivity 1-2291392-3 is an EMI shielded RF SMB connector with dielectric voltage of 800VAC. It has a characteristic impedance of 50 ohm, operates up to 6 GHz, and is suitable for board mounting applications. The connector features a zinc alloy shell, right angle mounting style, and solder termination type.
131-1402-116
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Maximum Operating Frequency: 4 GHz; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE;
131-3701-811
Bel Fuse's 131-3701-811 RF SMB Connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and male contact gender. With durability of 500 cycles, it is ideal for commercial applications requiring a max frequency of 4 GHz in temperatures ranging from -65 to 165°C.
1060455-1
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Termination Type: SOLDER; Coupling Type: SNAP; IEC Conformity: NO; Body or Shell Style: RECEPTACLE;
142194-75
Amphenol 142194-75 is a RF SMB connector with 75 ohm impedance, gold shell finish, and PTFE insulator. It is used in commercial applications for RG-179/U cable termination, featuring a right angle plug design with locking mounting option.
414026-2
TE Connectivity 414026-2 is a RF SMB connector with characteristic impedance of 50 ohm and insertion loss of 0.3 dB. It has a durable brass shell, rated for 500 cycles, suitable for board mounting applications up to 4 GHz frequency range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73403-5112
RF SMB/SSMB Connectors; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
73404-0573
73404-0570
73403-5762
Molex 73403-5762 SSMB Connector features 50 ohm impedance, 6 GHz frequency, and 1.3 VSWR. Ideal for RF applications with RG174/RG316 cables, operating from -40 to 105°C. Snap coupling type with nickel finish, suitable for high durability in cable assemblies.
73403-6283
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; No. of Ports: 1; Body Depth: .669 inch;
73404-0572
73403-6948
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Additional Features: POLARIZED; Body Depth: .669 inch; Coupling Type: SNAP;
73403-6951
RF SMB CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Cable Types: RG174, RG316; Termination Type: CRIMP; Panel Mount: NO;
73403-6290
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: .374 inch; Mounting Type: CABLE; Body Depth: .669 inch;
73403-6291
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Mounting Type: CABLE; Body or Shell Style: JACK;
73403-6292
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: COAX; No. of Ports: 1; Body Depth: .669 inch;
73403-6285
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: COAX; Coupling Type: SNAP; Body Width: .374 inch;
73403-6293
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: .374 inch; Termination Type: CRIMP; Mating Contact Finish: NOT APPLICABLE;
73403-6282
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Finish: NICKEL; Body Depth: .669 inch; Contact Material: NOT APPLICABLE;
73403-6289
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Body Width: .374 inch; No. of Ports: 1;
73403-6281
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; No. of Ports: 1; Mounting Type: CABLE;
73403-6284
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Body or Shell Style: JACK; Termination Type: CRIMP;
73403-6288
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Cable Types: RG174, RG316; Termination Type: CRIMP;
73403-6280
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 6 GHz; Body or Shell Style: JACK; Insulator Material: POLYPROPYLENE;
73403-6286
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Body Length: .472 inch; Body Width: .374 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved