Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF MCX/MMCX Connectors; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
Median Price
$2.350
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Verical
1+ parts
$1.960
100+ parts
1k+ parts
$1.850
10k+ parts
Mouser Electronics
$3.310
-
$2.000
$1.990
DigiKey
$3.960
$2.775
$2.299
Newark
$3.340
$2.820
Powell Electronics
$2.210
$1.750
Farnell
$1.930
Chip1Stop
$2.320
Digiode
$1.862
Vyrian
TestEquity
IBS Electronics
$2.623
$2.468
$1.949
TME
$2.940
$2.490
$2.240
Corphita
$1.764
Andel Nordic
$2.446
$2.349
Assy Fe
Perfect Parts
MCX & MMCX Connectors 73366-0020 attributes and parameters. Explore more MCX & MMCX Connectors devices from Molex
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
73366-0020 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Hy Electronic
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
Transys Electronics
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
135-3701-201
Bel Fuse
135-3701-201 by Bel Fuse is an RF MMCX connector with a characteristic impedance of 50 ohm, suitable for commercial applications up to 6 GHz. Featuring a dielectric voltage rating of 700VAC and insulation resistance of 1 Gohm, it offers reliable performance in temperatures ranging from -55 to 155 °C. This snap-coupling type connector has a durable brass shell and PTFE insulator, ideal for board mounting with a locking option.
73366-0013
The Molex 73366-0013 is a RF MCX connector with a characteristic impedance of 50 ohm. It has an insertion loss of 0.45 dB and can withstand voltages up to 1050VAC. This connector is commonly used in commercial applications requiring reliable connections at frequencies up to 6 GHz.
73415-1121
Molex 73415-1121 is a RF MMCX connector with gold nickel finish, brass contact material, and 50 ohm impedance. It features snap coupling, male gender, and right angle mounting style. Ideal for cable termination in MCX & MMCX applications.
135-3711-201
Bel Fuse 135-3711-201 is an RF MMCX connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator, it offers high durability with 500 cycles and operates b/w -55°C to 155°C. Ideal for board mounting, this connector ensures reliable signal transmission with low contact resistance of 8 mohm.
133-3711-312
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Insulator Material: POLYTETRAFLUOROETHYLENE; Additional Features: STANDARD: MIL-PRF-39012;
73415-1692
Molex 73415-1692 RF MCX Connector has a characteristic impedance of 50Ω, insulator material PTFE, and coupling type SNAP. Ideal for board mounting in applications requiring female contact gender, surface mount termination, and straight mounting style.
135-9701-201
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Total No. of Contacts: 1; Manufacturer Series: 135;
MMCXV-J-P-HF-ST-TH1
Samtec
Samtec's MMCXV-J-P-HF-ST-TH1 is a RF MMCX connector with 50 ohm impedance, 1.3 VSWR, and 6 GHz operating frequency. Ideal for commercial applications, it features a 0.138" body diameter, PTFE insulator, and brass shell material for reliable performance in temperatures ranging from -65 to 125°C.
908-22101T
Amphenol
Amphenol's 908-22101T RF MMCX Connector features gold termination, liquid crystal polymer insulator, and beryllium copper contact material. With a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for board mounting in applications requiring high-frequency signal transmission.
60636031210620
Wuerth Elektronik & Kg
RF MCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
82_MMCX-S50-0-55/119_OM
Huber+suhner Ag
82_MMCX-S50-0-55/119_OM by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for applications up to 6 GHz. It features a gold finish, snap coupling type, and durability of 500 cycles. Ideal for surface mount board installations requiring high-frequency signal transmission.
R113424000
Radiall S A
Radiall S A's R113424000 RF MCX Connector features 0.07 dB insertion loss, 1.12 VSWR, and 50 ohm impedance for up to 6 GHz applications. With a gold over nickel finish and PTFE insulator, this surface mount connector is ideal for board mounting in high-frequency systems requiring reliable signal transmission.
R113.665.000
R113.665.000 by Radiall S A is a RF MCX connector with 50 ohm impedance, 0.07 dB insertion loss, and 1.14 VSWR. Ideal for applications requiring high durability, it features POLYTETRAFLUOROETHYLENE insulation material and operates b/w -55 to 155°C temperature range at frequencies up to 6 GHz.
Bel Fuse 133-3711-312 is an RF MCX connector with 50 ohm impedance, PTFE insulator, and brass shell. Operating at -65 to 165°C, it withstands up to 1400VAC and offers durability of 500 cycles. Ideal for board mounting in applications requiring a reliable female jack connector up to 6 GHz.
133-9701-201
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; IEC Conformity: NO; Mounting Style: STRAIGHT;
82_MMCX-S50-0-2/111_KE
Huber+suhner Ag's 82_MMCX-S50-0-2/111_KE is a RF MMCX connector with gold finish, suitable for board mounting. With 50 ohm impedance and 6 GHz frequency, it offers durability of 500 cycles. Ideal for commercial applications requiring reliable right-angle coax connections.
133-8433-101
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Style: COAX;
MCX-J-P-H-RA-SM1
Samtec's MCX-J-P-H-RA-SM1 is a RF MCX connector with 50 ohm impedance, GOLD finish, and SNAP coupling. Ideal for applications requiring surface mount termination, right angle mounting, and operating frequency up to 6 GHz.
919-382J-51P
RF MCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
R113.182.000W
R113.182.000W by Radiall S A is a RF MCX connector with 50 ohm impedance, 0.5 dB insertion loss, and 1.1 VSWR. It is used in applications requiring high durability, such as commercial-grade systems operating up to 6 GHz frequency range with RG-188 cables for reliable signal transmission.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved