Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
7101MDABE22 by Molex is a SPDT toggle switch with a chrome actuator and stainless steel housing. It has an electrical life of 100,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring a reliable ON-ON contact function in temperatures ranging from -30 to 85°C.
Median Price
$10.167
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
VNN
Vyrian
Andel Nordic
$9.115
$8.750
AZTECH Wire
$10.069
Continental Prestige Electronics
$9.964
QUARKTWIN TECHNOLOGY LTD
Corphita
Argo Parts USA
Authorized Procurement Solutions
Chrome color gives a sleek and modern appearance to the toggle switch, making it visually appealing.
Stainless steel housing ensures durability and corrosion resistance, making the toggle switch suitable for various environments.
With a high electrical life of 100,000 cycles, this toggle switch is reliable and long-lasting.
SPDT switch function offers versatility and flexibility in controlling different circuit configurations.
With a maximum operating temperature of 85°C, this toggle switch can withstand high temperatures without malfunctioning.
Toggle Switches 7101MDABE22 attributes and parameters. Explore more Toggle Switches devices from Molex
Angle (Actuator):
Color (Actuator):
Finish (Actuator):
Length (Actuator):
Material (Actuator):
Type (Actuator):
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Diameter (Bushing):
Length (Bushing):
Type (Bushing):
Center Contact Material:
Center Contact Plating:
AC Maximum Power Rating R Load (Contact):
Contact Function:
Contact Resistance:
Contact Timing:
Dielectric Withstand Volts (V):
Electrical Life:
End Contact Material:
End Contact Plating:
Housing Material:
Insulation Resistance:
Manufacturer Series:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
PCB Hole Count:
Sealing:
Switch Function:
Switch Type:
Terminal Length:
Terminal Material:
Termination Type:
7101MDABE22 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
PCN Assembly/Origin - Multiple Devices Location 04/Sep/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Gec Plessey Semiconductors
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Bharat Electronics
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
FDN5618P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
102TL1-3D
Honeywell Sensing And Control
The Honeywell Sensing And Control 102TL1-3D Toggle Switch features SPDT switch function, with a body width of 22.61in and sealing for dust and water proofing. Ideal for panel mounting applications, it has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC.
P2011BP
Nkk Switches
TOGGLE SWITCH;
T102SHCQE
C & K Components
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): TOGGLE; Contact Function: OFF-ON; Solderability: MIL-STD;
12TS15-4
The Honeywell 12TS15-4 toggle switch features a SPDT switch function with a max AC contact current of 10A@277VAC. With dust-proof and water-proof sealing, it is ideal for panel mount-threaded applications requiring a lever actuator type and latched switch action. Measuring 19.05" in body width, 28.45mm in height, and 33.27mm in length/diameter, this toggle switch offers reliable performance in various industrial settings.
101TL1-2
101TL1-2 by Honeywell Sensing And Control is a dust and water-proof toggle switch with SPST function. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications, this switch features gold plating on end contacts and silver cadmium oxide material for center contacts.
8504K6
Safran Group
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Body Width: 23.11 inch; Body Height: 31.5 mm;
7301K2Z3GE
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 3PDT; Type (Actuator): LOCKING LEVER; Contact Function: ON-ON; Solderability: MIL-STD;
MS24523-27
Eaton Corporation
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Electrical Life: 20000 Cycle(s); DC Maximum Rating R Load (Contact): 15A@28VDC;
1TL1-1E
1TL1-1E by Honeywell Sensing And Control is a SPDT toggle switch with gold-plated contacts. It has a sealing rating of DUST PROOF and can handle up to 15A@125VAC. Ideal for applications requiring a latched switch function in environments with dust exposure.
7101SYCQE
Itt Cannon
7101SYCQE by ITT Cannon is a SPDT toggle switch with SILVER end contact plating. It has an electrical life of 100000 cycles and insulation resistance of 1000000000 ohm. Ideal for applications requiring a durable, high-performance toggle switch in harsh environments.
1TL11-82
1TL11-82 by Honeywell is a DPDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 15A@125VAC and DC contact voltage of 28V. Ideal for panel mounting applications requiring a momentary switch action.
100SP1T1B1M1QEH
E-switch
The E-switch 100SP1T1B1M1QEH is a SPDT toggle switch with 40000 cycles electrical life, 1000000000 ohm insulation resistance, and 5A@120VAC AC max rating. Ideal for applications requiring ON-ON contact function, it has a sealing of EPOXY and operates b/w -30 to 85 °C temperatures.
The ITT Cannon T102SHCQE is a SPST toggle switch with 30000 cycles electrical life. It has a body width of 5.08" and sealing with EPOXY TERMINAL SEAL for durability. Ideal for applications requiring a latched switch function, it can handle up to 2A@120VAC AC max rating R load.
A101SYCB04
TE Connectivity
TE Connectivity A101SYCB04 is a SPDT toggle switch with 1000000000 ohm insulation resistance. It has 0.4 A max AC/DC contact current, gold-plated center contact, and nickel-finished actuator. Ideal for panel mounting applications requiring ON-ON contact function in low voltage circuits up to 20 V.
MS90311-231
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LARGE LEVER; AC Maximum Rating R Load (Contact): 3A@115VAC; Switch Action: LATCHED;
4NT1-72
4NT1-72 by Honeywell Sensing And Control is a 4PDT toggle switch with dust and water proof sealing. It has a max AC contact current of 10A@277VAC and operates at temperatures up to 71°C. Ideal for panel mounting applications, this switch features a lever actuator and screw termination type.
1TL1-2G
1TL1-2G by Honeywell Sensing And Control is a SPST toggle switch with a locking lever actuator. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring dust-proof sealing, it features latched switch action and screw termination, suitable for panel mount-threaded installations.
8501K9
The Eaton Corporation 8501K9 is a DPST toggle switch with environmentally sealed sealing. It has an electrical life of 20,000 cycles and can handle up to 15A@115VAC AC max rating R load. Ideal for panel mounting applications requiring a latched switch action with a lever actuator type.
12149X778
Apem Components
The Apem Components 12149X778 is a black toggle switch with DPDT switch function. It has an electrical life of 20,000 cycles and insulation resistance of 1,000,000,000 ohms. With IP67 sealing and gold terminal finish, it is ideal for panel mount applications in environments with temperatures ranging from -40 to 85°C.
7565K5
7565K5 by Eaton Corporation is a DPDT toggle switch with 15A@125VAC rating. Featuring a lever actuator, it is panel mount-threaded for easy installation. Ideal for applications requiring reliable switching in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Solderability: MIL-STD;
ITT Cannon
7101SYZQE
7101SYZQE by ITT Cannon is a SPDT toggle switch with SILVER plating, suitable for applications requiring a 5A@120VAC AC max rating. Featuring STAINLESS STEEL housing and COPPER ALLOY terminals, it offers an electrical life of 100000 cycles. With EPOXY TERMINAL SEALING and GLASS FILLED NYLON insulator material, this switch operates b/w -30 to 85 °C temperatures.
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Solderability: MIL-STD;
7101SYZQES
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Solderability: MIL-STD;
7101L42HAW4SE2
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Solderability: MIL-STD;
7101SYZQE22
7101SYZQE2
7101MDABE
Molex
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Minimum Operating Temperature: -30 Cel;
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Maximum Operating Temperature: 85 Cel; Maximum AC Contact Voltage: 20 V; Body Width: 12.7 inch;
7101MDABE22
7101K2ZQE2
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LOCKING LEVER; Contact Function: ON-ON; Solderability: MIL-STD;
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LOCKING LEVER; Manufacturer Series: 7000; Body Width: 6.86 inch;
7101K2ZQE3
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LOCKING LEVER; Termination Type: SOLDER; Body Width: 6.86 inch;
7101MDABE2
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Termination Type: SOLDER;
7101MDABE72
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; End Contact Plating: GOLD OVER NICKEL;
7101MDABES
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved