Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
4TL1-4 by Honeywell Sensing And Control is a 4PDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 11A@125VAC and DC contact current of 18A@28VDC. Ideal for panel mounting applications, it offers momentary switch action with screw termination.
Median Price
$90.980
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$90.960
100+ parts
$82.910
1k+ parts
-
10k+ parts
TTI
$69.770
$69.070
$68.380
DigiKey
$238.088
$233.326
Nova Conductors
$67.090
Vyrian
VNN
Advanced Electronics
$1.141
$1.038
$0.936
Aztec Data Supply Inc.
$3.387
AZTECH Wire
$19.287
Ampacity Inc.
$52.350
Semicontronic
$51.041
$50.780
Corohmni
$59.580
Aranea Global
$65.748
$63.118
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
Wide body width provides durability and stability to the toggle switch, making it suitable for heavy-duty applications.
Dust and water proof sealing ensures reliable performance even in challenging environmental conditions, enhancing the longevity of the toggle switch.
The 4PDT switch function allows for multiple poles to be controlled simultaneously, providing versatile control options.
Compact body height makes the toggle switch suitable for installations where space is limited.
High maximum operating temperature range ensures the toggle switch can operate effectively in various temperature environments.
High AC contact current rating enables the toggle switch to handle heavy electrical loads without overheating.
High DC contact voltage rating makes the toggle switch compatible with various DC circuits and applications.
Traditional toggle switch design offers easy operation and reliable performance for controlling electrical circuits.
AC maximum contact rating ensures the toggle switch can safely handle high current loads at 125VAC.
Compact body length/diameter makes the toggle switch suitable for installations with space constraints.
High DC contact current rating allows the toggle switch to handle heavy DC loads at 28VDC.
High DC contact current rating ensures the toggle switch can safely handle heavy DC current loads without issues.
Momentary switch action provides temporary control of circuits, making it ideal for applications where momentary activation is needed.
Screw termination type makes installation and wiring of the toggle switch secure and convenient.
High AC contact voltage rating allows the toggle switch to be used in applications requiring up to 125VAC.
Threaded panel mounting feature ensures secure and stable installation of the toggle switch on panels or enclosures.
Toggle Switches 4TL1-4 attributes and parameters. Explore more Toggle Switches devices from Honeywell Sensing And Control
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Mounting Feature:
Maximum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
4TL1-4 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Renesas Electronics
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ6ENF10R0V
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
EU2B-YS3203C
Idec
ROTARY SWITCH;
Baneasa S A
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
MTA206N
Nidec Copal Electronics
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): LONG BAT; Contact Function: ON-ON; Solderability: WAVE;
AML23EBA2AA04
Honeywell Sensing And Control
Honeywell's AML23EBA2AA04 toggle switch offers SPDT function with 25000 cycles electrical life. With 2A@24VDC DC max rating, it is ideal for panel mounting applications requiring latched switch action. Featuring a paddle type actuator, this switch has dimensions of 18.92" x 36mm x 28.85mm and termination options of solder/quick connect.
7205SYZQE
C & K Components
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): TOGGLE; Solderability: MIL-STD; Material (Actuator): BRASS;
2TL1-2G
2TL1-2G by Honeywell Sensing And Control is a DPST toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel mount-threaded installations in environments up to 71°C.
2FB53-73/TABS
Carling Technologies
Carling Technologies 2FB53-73/TABS toggle switch has SPDT function with 50000 cycles electrical life. Insulation resistance is 100MΩ, suitable for applications requiring ON-ON contact function. With AC max rating of 15A@125VAC, it's ideal for panel mount-threaded installations in various equipment.
MS25307-232
Eaton Corporation
Eaton Corporation's MS25307-232 is a DPDT toggle switch with 20000 cycles electrical life. It has a body width of 25.78 inch and sealing for environmental protection. Ideal for applications requiring a latched switch function, with max AC contact current of 25A@115VAC.
T102SHCQE
Itt Cannon
The ITT Cannon T102SHCQE is a SPST toggle switch with 30000 cycles electrical life. It has a body width of 5.08" and sealing with EPOXY TERMINAL SEAL for durability. Ideal for applications requiring a latched switch function, it can handle up to 2A@120VAC AC max rating R load.
102TL1-3D
The Honeywell Sensing And Control 102TL1-3D Toggle Switch features SPDT switch function, with a body width of 22.61in and sealing for dust and water proofing. Ideal for panel mounting applications, it has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC.
11NT1-3
11NT1-3 by Honeywell Sensing And Control is a SPST toggle switch with a lever actuator. It has a dust-proof and water-proof sealing, making it suitable for various applications. With max AC contact current of 15A@277VAC and DC contact current of 20A@28VDC, it can operate at temperatures up to 71°C.
2TL1-5
2TL1-5 by Honeywell Sensing And Control is a DPDT toggle switch with dust-proof sealing. It has a max AC contact current of 11A@125VAC and DC contact current of 18A@28VDC. Ideal for panel mounting applications, this switch features a lever actuator and can operate at temperatures up to 71°C.
12146AGX408
Apem Components
12146AGX408 by Apem Components is a toggle switch with DIALLYL PHTHALATE housing and SILVER terminals. It has an electrical life of 50000 cycles, insulation resistance of 1000000000 ohms, and can handle up to 4A@125VAC. Ideal for panel mounting applications requiring a reliable ON-ON contact function in temperatures ranging from -40°C to 85°C.
101TL1-2D
101TL1-2D by Honeywell is a SPST toggle switch with a lever actuator. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. With dust-proof and water-proof sealing, it is ideal for panel mount applications requiring a latched switch action in environments up to 71°C.
D22019P
Nkk Switches
D22019P by Nkk Switches is a SPDT toggle switch with gold-plated brass terminals. It has an electrical life of 50,000 cycles and insulation resistance of 1G ohm. With a max operating temperature of 70°C and min of -10°C, it is ideal for applications requiring reliable switching in various environments.
8500K3
Safran Group
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-OFF-(ON); Diameter (Bushing): .432 inch;
2-1825138-8
TE Connectivity
TE Connectivity 2-1825138-8 is a DPDT toggle switch with 40000 cycles electrical life. It has insulation resistance of 1G ohm and can handle up to 5A@28VDC. Ideal for applications requiring a latched ON-ON switch function, such as panel-mounted controls in industrial settings.
MTG426N
TE Connectivity's MTG426N Toggle Switch features 4PDT switch function, 3A@250VAC AC max rating, and 4A@28VDC DC max rating. Ideal for applications requiring a durable toggle switch with gold-plated contacts, such as industrial control panels and electronic equipment.
4-1825136-5
TE Connectivity 4-1825136-5 Toggle Switch offers 6000 cycles electrical life, SPDT switch function, and 1000000000 ohm insulation resistance. Ideal for panel mounting applications with a max AC contact voltage of 125V and DC contact current of 5A@28VDC.
112TW1-3D
112TW1-3D by Honeywell Sensing And Control is a DPDT toggle switch with sealing for dust, water, and environmental protection. It has a max AC contact current of 5A@115VAC and DC contact voltage of 28V. Ideal for applications requiring a locking type actuator, such as panel mount-threaded installations.
B13AV
B13AV toggle switch by Nkk Switches features a SPDT switch function with 50000 cycles electrical life. It has a DC max power rating of 0.4VA@28VDC and insulation resistance of 500M ohm, making it ideal for applications requiring ON-OFF-ON contact functions in temperatures ranging from -30 to 85°C.
29ET5-T
29ET5-T toggle switch by Honeywell features a corrosion-proof sealing, 4PST switch function, and a lever actuator. With a max DC contact voltage of 28V and current rating of 7A@28VDC, it is ideal for panel mount-threaded applications requiring latched switch action.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
4TL1-3D
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): STANDARD LEVER; AC Maximum Rating R Load (Contact): 15A@115VAC; Termination Type: SCREW;
4TL1-3
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): STANDARD LEVER; Contact Function: ON-ON; Body Width: 33.53 inch;
4TL1-6
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PST; Maximum DC Contact Voltage: 28 V; Body Length/Diameter: 41.66 mm; Sealing: DUST PROOF; WATER PROOF;
4TL1-2D
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PST; Type (Actuator): LOCKING LEVER; DC Maximum Rating R Load (Contact): 20A@28VDC; Termination Type: SCREW;
4TL1-12M
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LEVER; Switch Action: LATCHED; AC Maximum Rating R Load (Contact): 15A@277VAC;
4TL1-61
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PST; Switch Action: MOMENTARY; AC Maximum Rating R Load (Contact): 11A@125VAC; Body Width: 33.53 inch;
4TL112
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PST; Type (Actuator): LEVER; DC Maximum Rating R Load (Contact): 20A@28VDC; Sealing: DUST PROOF; WATER PROOF;
4TL11-10K
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LOCKING LEVER; Sealing: DUST PROOF; WATER PROOF; Maximum Operating Temperature: 71 Cel;
4TL153-51
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LEVER; Body Height: 34.29 mm; AC Maximum Rating R Load (Contact): 11A@125VAC;
4TL159-3
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Termination Type: SCREW; Body Length/Diameter: 41.66 mm; Maximum AC Contact Current: 15 A;
4TL1-12H
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LEVER; Maximum AC Contact Current: 15 A; Maximum DC Contact Current: 20 A;
4TL144-1G
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Maximum DC Contact Current: 20 A; Maximum AC Contact Voltage: 125 V;
4TL144-5M
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): LEVER; Maximum AC Contact Current: 11 A; AC Maximum Rating R Load (Contact): 11A@125VAC;
4TL187-10J
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LOCKING LEVER; Body Length/Diameter: 41.66 mm; Switch Action: LATCHED;
4TL141-1M
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LOCKING LEVER; Sealing: DUST PROOF; WATER PROOF; Body Height: 34.29 mm;
4TL141-1N
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LOCKING LEVER; Maximum Operating Temperature: 71 Cel; Maximum AC Contact Voltage: 125 V;
4TL141-3G
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LOCKING LEVER; Maximum Operating Temperature: 71 Cel; Switch Action: LATCHED;
4TL141-5K
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LOCKING LEVER; AC Maximum Rating R Load (Contact): 11A@125VAC; Maximum DC Contact Current: 18 A;
4TL141-5N
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LOCKING LEVER; Manufacturer Series: 4TL141; Termination Type: SCREW;
4TL141-7E
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): LOCKING LEVER; Maximum DC Contact Voltage: 28 V; DC Maximum Rating R Load (Contact): 18A@28VDC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved