Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Filter Feature: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Andel Nordic
$21.682
$20.815
Corphita
Headers & Edge Type Connectors 51281-2430 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
51281-2430 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Semtech
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Comset Semiconductors
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Vishay Telefunken
Infinex
N2510-6002-RB
3m Electronic Products Division
N2510-6002-RB by 3M is a board connector with 10 contacts, rated at 1.75A signal current. It features a mating contact pitch of 0.1", insulation resistance of 1G ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications requiring reliable connections in electronic devices.
3606
Aw Industries
CARD EDGE CONNECTOR; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: NO; Mounting Type: BOARD; Manufacturer Series: 3606;
TCMD-08-01
Samtec
Samtec's TCMD-08-01 is a 2-row board connector with 16 contacts made of phosphor bronze. It has a terminal pitch of 2mm and supports IDC/solder termination. Ideal for applications requiring male contact gender, straight mounting style, and compatibility with both board and cable mounting types.
2-5767004-2
TE Connectivity
TE Connectivity 2-5767004-2 is a board stacking connector with 39 contacts, rated at 11.5A for signal current. It features a mating contact pitch of 0.025", insulation resistance of 2M ohm, and dielectric voltage withstand of 500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
B4B-ZR(LF)(SN)
J S T Mfg
B4B-ZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for board mounting applications requiring male contact gender and solder termination.
DF3A-2P-2DSA
DF3A-2P-2DSA by Hirose Electric is a board connector with 0.079" mating contact pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a solder termination type and operates b/w -30 to 85 °C temperatures.
640456-2
TE Connectivity 640456-2 is a BOARD CONNECTOR with 0.1" pitch, suitable for commercial applications. Features BRASS contacts, TIN finish, and GLASS FILLED POLYESTER insulator material. Rated for 5A signal current with operating temperatures from -55 to 105°C.
22-28-5123
Molex
The Molex 22-28-5123 is a board connector with 12 contacts, rated at 4A signal current. It features a mating contact pitch of 0.1", insulation resistance of 50Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring durable connectors with solder termination and rectangular PCB contact pattern.
VHR-4N-R
BOARD CONNECTOR;
TCMD-10-01
Samtec's TCMD-10-01 is a 20-contact, dual-row board connector with gold over nickel finish. It features phosphor bronze contacts and supports IDC/solder termination. Ideal for applications requiring male connectors, it offers a terminal pitch of 2mm and can be mounted on both boards and cables in straight style configurations.
801-43-020-10-002000
Mill-max Mfg
801-43-020-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 20 contacts, featuring MATTE TIN OVER NICKEL finish. It has a terminal pitch of 2.54mm and uses SOLDER termination. Ideal for applications requiring FEMALE contact gender in STRAIGHT mounting style on a PCB.
DTM06-2S-E007
TE Connectivity DTM06-2S-E007 is a 1.47" x 0.569" x 0.508" board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 125°C. It has 2 contacts, UL 94V-0 flammability code, and supports up to 7.5A signal current. Ideal for cable mounting applications requiring polarized housing and strain relief.
823-22-014-10-000101
823-22-014-10-000101 by Mill-max Mfg is a 14-contact board stacking connector with gold over nickel finish. Featuring 2 rows, it has a terminal pitch of 2.54mm and UL flammability rating of 94V-0. Ideal for applications requiring reliable connections in electronic devices.
52465-1071
52465-1071 by Molex is a 2-row BOARD CONNECTOR with 0.031" pitch, 10 contacts, and 0.5A signal rating. It features LIQUID CRYSTAL POLYMER insulator, TIN finish, and 500VAC dielectric voltage. Ideal for commercial applications requiring STRAIGHT mounting and SURFACE MOUNT termination.
15-91-1142
Molex 15-91-1142 is a 14-contact board connector with 0.1" pitch, suitable for commercial applications. Features include GLASS FILLED LIQUID CRYSTAL POLYMER insulator, 105°C max operating temp, and 15u plating thickness. Ideal for PCB mounting with solder holding posts, this male connector has a rectangular contact pattern and UL94V-0 flammability rating.
DF19G-20S-1C(05)
DF19G-20S-1C(05) by Hirose Electric is a 20-contact male plug board connector with crimp termination. It has UL 94V-0 flammability rating and is suitable for cable mounting applications. Ideal for various electronic devices requiring reliable edge type connectors.
2-640456-2
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: COPPER ALLOY; IEC Conformity: NO; Mixed Contacts: NO;
43025-2400
The Molex 43025-2400 is a 24-contact board connector with 0.118" pitch, suitable for commercial applications. Featuring polyester insulation and UL94V-0 flammability rating, it operates b/w -40°C to 105°C. With a rated current of 2.5A, this female connector has a crimp termination type and requires min withdrawal force of 3.5584N.
50-57-9406
Molex 50-57-9406 is a board connector with 0.1" pitch, suitable for commercial applications. It features a 3A signal current rating, GLASS FILLED POLYESTER insulator, and operates b/w -40 to 105°C. Ideal for cable mounting with crimp termination, this connector has a total of 6 contacts in a polarized housing design.
TSW-108-17-T-S
TSW-108-17-T-S by Samtec is a 0.1 inch pitch board connector with 8 contacts and a max operating temperature of 105°C. It features a durable design with a mating contact finish of matte tin over nickel, making it suitable for various applications in electronics and PCB assemblies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved