Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
51281-0894 by Molex is a FFC/FPC connector with 8 contacts, 0.020" pitch, and 0.5A signal rating. Ideal for board mounting applications, it features GLASS FILLED LIQUID CRYSTAL POLYMER insulation material and operates b/w -20 to 85°C.
Median Price
$0.364
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.547
100+ parts
$0.257
1k+ parts
-
10k+ parts
Arrow
$0.743
$0.542
PEI Genesis
Chip1Stop
$0.357
Master Electronics
$0.090
Verical
$0.098
Farnell
$0.439
Powell Electronics
$0.099
DigiKey
$0.370
TTI Europe
$0.315
RS (Exports)
$0.405
$0.353
Mobius Materials
$0.319
Nova Conductors
$0.509
Digiode
$0.520
Maritex
$1.617
Rapid Electronics
$1,459.928
IBS Electronics
$0.298
Vyrian
Sensible Micro Corp
VNN
Chip Stock
Greenchips
SIE Connect GmbH - GreenChips
Speed Components Ltd
Semicontronic
$0.268
$0.261
$0.260
Modulus Dynamics
$0.409
Corphita
$0.492
Continental Prestige Electronics
$0.499
Argo Parts USA
$0.494
Andel Nordic
$2.479
$2.380
Aztec Data Supply Inc.
$10.245
Perfect Parts
Authorized Procurement Solutions
Kepictronics
Assy Fe
Benley Electronics
EMSNET (Excess)
Netroflash
$0.484
$0.473
0.020 - Close contact pitch allows for high density of connections, making it suitable for compact electronic devices.
0.24 inch - Compact body length saves space and allows for efficient placement on circuit boards.
50000000 ohm - High insulation resistance ensures reliable and safe operation of the connector.
0.047 inch - Thin body width allows for flexibility in design and placement on PCBs.
0.159 inch - Adequate body depth provides stability and secure connection within the device.
GLASS FILLED LIQUID CRYSTAL POLYMER - High-quality material ensures durability and longevity of the connector.
FITTING NAIL - Easy and secure board mounting option for quick and hassle-free installation.
85 - Wide operating temperature range makes it suitable for various environmental conditions.
20 °C - Allows for operation in low temperature conditions without compromising performance.
FFC/FPC CONNECTOR - Specific connector type designed for flexible flat cables or printed circuit boards for seamless connection.
94V-0 - Highly flame-resistant material ensures safety and protection against fire hazards.
0.5 A - Suitable for carrying moderate current signals without overheating or degradation.
UL - Compliance with industry standards ensures quality and reliability of the product.
8 - Sufficient number of contacts for multiple connections within the device.
BOARD - Secure mounting type ensures stability and durability of the connector.
0.5 - Standard terminal pitch for compatibility with various electronic components.
RECTANGULAR - Common contact pattern for easy integration with PCB layouts.
SURFACE MOUNT - Surface mount termination for convenient and reliable connection on the PCB.
FEMALE - Female contact gender for compatibility with male connectors, allowing for versatile use.
20 mohm - Low contact resistance ensures efficient signal transmission and minimal power loss.
RIGHT ANGLE - Right angle mounting style for flexible positioning and space-saving design.
BELLOWED TYPE - Bellows contact design for enhanced durability and resistance to mechanical stress.
LOCKING - Secure locking mechanism for stable and reliable connection.
RECTANGULAR - Rectangular contact pattern for easy and precise alignment during connection.
COMMERCIAL - Commercial-grade reliability for consistent performance in everyday use.
Headers & Edge Type Connectors 51281-0894 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
51281-0894 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Devs 22/Jun/2022
PCN Assembly/Origin - Mult Devs Supplier 11/May/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
BM08B-SRSS-TBT(LF)(SN)
J S T Mfg
BM08B-SRSS-TBT(LF)(SN) by J S T Mfg is a 8-contact BOARD CONNECTOR with 0.039" pitch, 0.039" row spacing, and 100000000 ohm insulation resistance. It features POLYAMIDE insulator, tin finish, and operates b/w -25 to 85 °C. Ideal for applications requiring a polarized housing with UL94V-0 flammability rating.
70107-0004
Molex
Molex 70107-0004 is a BOARD CONNECTOR with 5 contacts, UL 94V-0 rated. It features MALE gender, CRIMP termination, and CABLE mounting. Ideal for various applications requiring reliable edge type connectors.
SSW-110-01-G-D
Samtec
SSW-110-01-G-D by Samtec is a 2-row, 20-contact board connector with a mating contact pitch of 0.1". It features gold over nickel termination finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable socket connections on PCBs with a rectangular contact pattern.
DF11-4DS-2C
Hirose Electric
The Hirose Electric DF11-4DS-2C is a 2-row board connector with 4 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring a durable socket-style connector with crimp termination, suitable for commercial use in environments ranging from -30 to 85°C.
2-1761608-3
TE Connectivity 2-1761608-3 is a board connector with 10 contacts, dual polarization, and solder termination. It has a mating contact pitch of 0.1 inch and operates b/w -65 to 105 °C. Ideal for commercial applications requiring a reliable male plug with straight mounting and blue insulator color.
61300611821
Wuerth Elektronik & Kg
61300611821 by Wurth Elektronik is a BOARD CONNECTOR with 6 contacts, rated at 3A. It features GOLD contact finish, POLYBUTYLENE TEREPHTHALATE insulator material, and operates b/w -40 to 125 °C. Ideal for commercial applications requiring a reliable connection on PCBs with a mating contact pitch of 0.1 inch.
10151114-001TLF
Amphenol Communications Solutions
Amphenol's 10151114-001TLF card edge connector features a mating contact pitch of 0.02", UL flammability code of 94V-0, and total of 314 contacts. Ideal for board mounting with solder holding posts, this female connector has a durability of 50 cycles and is suitable for applications requiring a rated current signal of 1.1A.
1-2199119-5
TE Connectivity 1-2199119-5 is a card edge connector with 67 contacts, rated at 0.5A. It has a mating contact pitch of 0.019", operates b/w -40 to 80°C, and features a polarized design for secure connections. Ideal for board mounting applications requiring high reliability and signal integrity.
FTSH-105-01-F-DV-K-P
Samtec's FTSH-105-01-F-DV-K-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
307-074-422-278
Edac
Edac 307-074-422-278 is a CARD EDGE CONNECTOR with 74 contacts, 2 rows, and 0.156" pitch. It has a dielectric voltage of 2545VAC, insulation resistance of 5000000000 ohm, and operates b/w -40 to 105 °C. Ideal for board and panel mounting applications requiring high current signal connections.
PHR-3
PHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with POLYAMIDE66 insulator. It has 0.079" contact pitch, 800VAC dielectric voltage, and -25 to 85 °C operating temp range. Ideal for CABLE mounting, it features FEMALE contacts with 20 mohm resistance and 0.019" min insulation diameter.
831-43-025-10-001000
Mill-max Mfg
831-43-025-10-001000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish, and 2mm pitch. Ideal for board-to-board connections in various electronic applications due to its FEMALE contact gender, SOLDER termination, and STRAIGHT mounting style.
3674
Lumberg Connect
3674 by Lumberg Connect is a BOARD CONNECTOR with 25 contacts, Tin (Sn) finish. It has a Terminal Pitch of 5mm and UL Flammability Code of 94V-0. Ideal for applications requiring RIGHT ANGLE mounting in Headers & Edge Type Connectors.
51021-0600
The Molex 51021-0600 is a board connector with 6 contacts, 0.049" pitch, and 353VAC voltage withstand. Ideal for commercial applications, it has a temperature range of -40 to 105°C and features crimp termination for durability in cable mounting setups.
DF11-10DP-2DS(24)
DF11-10DP-2DS(24) by Hirose Electric is a 10-contact board connector with 0.079" pitch, suitable for PCB applications. It features a dielectric voltage of 650VAC, insulation resistance of 1Gohm, and operates b/w -30 to 85°C. Ideal for commercial use, it offers durability of 30 cycles and solder termination type.
154763
Erni Electronics
Erni Electronics 154763 is a Headers & Edge Type Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 10^10 ohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for board stacking applications, featuring liquid crystal polymer insulator material and gold mating contact finish.
DF40C-100DS-0.4V(51)
DF40C-100DS-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" mating pitch, 50000000 ohm insulation resistance, and 100VAC dielectric voltage. Ideal for applications requiring high durability and reliability in commercial settings with -35 to 85 °C operating temperature range.
66506-320LF
Amphenol Communications Solutions' 66506-320LF is a 2-row loaded board connector with 16 contacts. It has a terminal pitch of 2.54mm and is UL Flammability Code 94V-0 rated. This male connector is used for straight mounting on boards, making it suitable for various applications in the electronics industry.
1658621-1
TE Connectivity 1658621-1 is a dual-row board connector with 10 contacts, 0.1" pitch, and polyethylene insulation. It operates b/w -65 to 105°C, rated at 1A signal current, suitable for ribbon cable termination in commercial applications.
22-01-3047
Molex 22-01-3047 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulation, it offers 700VAC dielectric voltage and operates b/w -40 to 105 °C. Ideal for commercial applications requiring a durable, polarized female connector with 4A signal current capacity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
51281-0594
Molex 51281-0594 FFC/FPC connector with 0.020" pitch, 5 contacts, and glass-filled LCP insulator. Ideal for board mounting in commercial applications. Operating temp -20 to 85°C, UL94V-0 rated, female contact type with surface mount termination.
51281-0598
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.02; Mounting Option-1: LOCKING;
51281-0694
51281-0694 by Molex is a FFC/FPC connector with 6 contacts, 0.020" pitch, and 0.5A signal current rating. Featuring GLASS FILLED LIQUID CRYSTAL POLYMER insulator, it's ideal for board mounting applications at -20 to 85°C. With a right-angle mounting style and locking option, this UL-certified connector suits commercial reliability requirements.
51281-1294
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: .319 inch; Termination Contact Finish: NOT APPLICABLE;
51281-1494
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Body Length: .358 inch;
51281-1898
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE; UL Flammability Code: 94V-0;
51281-0898
The Molex 51281-0898 is a FFC/FPC connector with 8 contacts, featuring a mating contact pitch of 0.02" and insulator material made of glass-filled liquid crystal polymer. It is used for board mounting with a right-angle mounting style, suitable for applications requiring surface mount termination in compact spaces.
512811094
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 0.5;
51281-0940
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mounting Type: BOARD;
51281-0592
51281-0630
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Resistance: 20 mohm;
51281-0692
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mating Contact Pitch (inch): 0.020;
51281-0830
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Style: DUAL PRONG;
51281-0892
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mounting Style: RIGHT ANGLE;
51281-0930
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Insulation Resistance: 50000000 ohm;
51281-0992
51281-0540
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mixed Contacts: NO;
51281-0840
51281-0994
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: GLASS FILLED LIQUID CRYSTAL POLYMER; Termination Type: SURFACE MOUNT;
51281-0794
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Insulation Resistance: 50000000 ohm; Termination Type: SURFACE MOUNT; Mating Contact Pitch (inch): 0.020; Board Mounting Option: FITTING NAIL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved