Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
51281-0694 by Molex is a FFC/FPC connector with 6 contacts, 0.020" pitch, and 0.5A signal current rating. Featuring GLASS FILLED LIQUID CRYSTAL POLYMER insulator, it's ideal for board mounting applications at -20 to 85°C. With a right-angle mounting style and locking option, this UL-certified connector suits commercial reliability requirements.
Median Price
$0.294
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.174
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.317
$0.301
RS (Exports)
$0.400
Arrow
$0.505
$0.344
$0.274
Distrelec
$1.168
$0.879
$0.836
Verical
Chip1Stop
$0.271
Farnell
$0.297
Powell Electronics
$0.257
DigiKey
$0.273
Master Electronics
$0.241
Element14
$0.307
TTI
Newark
$0.280
$0.201
Digiode
$0.136
TestEquity
Nova Conductors
$0.330
Maritex
$0.660
$0.441
$0.300
$0.260
TME
$0.730
$0.493
$0.333
$0.290
Rapid Electronics
$1,016.837
Vyrian
IBS Electronics
$0.299
Bristol Electronics
VNN
Lantek
Semtec, LLC
Holdelec - ElecDif-Pro
Semicontronic
$0.122
$0.119
$0.118
Corphita
$0.129
Allen Electronics Distributors
$0.255
$0.243
$0.195
Modulus Dynamics
$0.308
Advanced Electronics
Continental Prestige Electronics
$0.323
Argo Parts USA
$0.320
CoreStaff
$0.341
$0.177
Andel Nordic
$6.707
$6.439
Aztec Data Supply Inc.
$7.186
Kepictronics
Assy Fe
Perfect Parts
S.R.D Solutions
GreenTree Electronics
Allows for precise and secure connection with other mating parts.
Proper length for fitting into various electronic devices or boards.
High insulation resistance ensures reliable performance and prevents electrical leakage.
Compact width for efficient use of space on the board or device.
Optimal depth for secure mounting and stability.
Durable and heat-resistant material for long-lasting use.
Easy and secure mounting option for stability on the board.
Suits a wide range of operating environments.
Suitable for use in low-temperature conditions without compromising performance.
Specifically designed for flat flexible cable connections for efficient routing in compact spaces.
Meets high safety standards for electrical components.
Capable of handling moderate current loads for signal transmission.
A sufficient number of contacts for various connection requirements.
Designed for secure attachment to PCBs for stable performance.
Optimal pitch for easy connection with compatible terminals.
Common and versatile contact pattern for easy integration.
Suitable for surface mounting on PCBs for efficient assembly.
Compatible with male connectors for secure and reliable connection.
Low contact resistance for efficient signal transmission.
Enables easy and secure mounting at a right angle for space-saving installation.
Durable contact style for consistent performance over time.
Includes a locking mechanism for secure connection and stability.
Common contact pattern for compatibility with various connectors.
Meets commercial reliability standards for consistent and dependable performance.
Headers & Edge Type Connectors 51281-0694 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
51281-0694 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - DK OBS NOTICE Mult Devs 22/Jun/2022
PCN Assembly/Origin - Mult Devs Supplier 11/May/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
EU2B-YS3103F
Idec
ROTARY SWITCH;
Boca Semiconductor
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Bytesonic Electronics
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
BM04B-SRSS-TB(LF)(SN)(P)
J S T Mfg
BM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and TIN finish. It is used for surface mount applications in headers & edge type connectors. The connector has UL Flammability Code of 94V-0 and mating contact finish of TIN OVER COPPER.
66506-320LF
Amphenol Communications Solutions
Amphenol Communications Solutions' 66506-320LF is a 2-row loaded board connector with 16 contacts. It has a terminal pitch of 2.54mm and is UL Flammability Code 94V-0 rated. This male connector is used for straight mounting on boards, making it suitable for various applications in the electronics industry.
43645-0500
Molex
The Molex 43645-0500 is a board connector with 5 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. It is commonly used in commercial applications requiring durable connectors with crimp terminations for cable mounting.
14-45-0222
Molex 14-45-0222 is a 22-contact board connector with 0.1" pitch, TIN over nickel finish, and glass-filled polyester insulator. It operates b/w -40 to 105°C, rated for 3A signal current, and has a durability of 25 cycles. Ideal for commercial applications requiring reliable male connectors with IDC termination in black color.
43650-0212
The Molex 43650-0212 is a board connector with 0.118" mating contact pitch, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 100u plating thickness. Ideal for applications requiring a durable male connector with 5A signal current rating, operating b/w -40 to 105°C in commercial settings.
1-640456-4
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; JESD-609 Code: e3; MIL Conformity: NO;
FTSH-110-01-L-DV-K-A-P-TR
Samtec
The Samtec FTSH-110-01-L-DV-K-A-P-TR is a 20-contact board connector with a mating contact pitch of 0.05". It features tin termination finish, liquid crystal polymer insulator, and gold mating contact finish. Ideal for commercial applications requiring a reliable, straight-mount male connector with surface mount termination.
351-10-139-00-004101
Preci-dip Sa
351-10-139-00-004101 by Preci-dip Sa is a BOARD CONNECTOR with GOLD contact finish. Featuring 39 contacts on a 2.54mm pitch, it is ideal for board mounting applications requiring male BRASS contacts. With UL Flammability Code of 94V-0, this STRAIGHT mounting style connector ensures reliable solder termination.
SSW-106-01-T-D
Samtec SSW-106-01-T-D is a 2-row, 12-contact board connector with a mating contact pitch of 0.1". It features liquid crystal polymer insulator material and matte tin finish over nickel. Ideal for PCB applications requiring reliable female socket connectors with solder termination in commercial settings.
53048-0210
Molex 53048-0210 is a board connector with 2 contacts, 0.049" pitch, and TIN finish. It has a polyamide insulator, operates b/w -40 to 85°C, and features right-angle mounting. Ideal for commercial applications requiring reliable male connectors with rectangular contact pattern.
B3B-ZR-SM4-TF(LF)(SN)
B3B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and is ideal for surface mount applications in headers & edge type connectors.
TSW-106-07-G-S
Samtec TSW-106-07-G-S is a 6-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body size of 0.6" x 0.098" x 0.1". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C and meets UL standards.
45108-010030
3m Electronic Products Division
The 3M Electronic Products Division's 45108-010030 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1G ohm, and dielectric voltage rating of 1250VAC. It has female contacts, operates b/w -65 to 125°C, and is suitable for commercial applications requiring reliable signal currents up to 2.5A.
22-01-3057
Molex 22-01-3057 is a board connector with 0.1" pitch, suitable for commercial applications. Features include 5 contacts, 4A signal current rating, and -40 to 105°C operating temperature range. Ideal for cable mounting with crimp termination, this female connector offers high durability and polarization key for secure connections.
ESHF-105-01-L-D-SM-LC
ESHF-105-01-L-D-SM-LC by Samtec is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05", matte tin termination finish, and liquid crystal polymer insulator. It has a temperature range of -55 to 125°C and is ideal for commercial applications requiring a polarized housing and surface mount termination on rectangular PCB patterns.
MTCB1X-106-XXXCS025
TE Connectivity
BOARD CONNECTOR;
50-57-9402
The Molex 50-57-9402 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.199 inch. It has an insulation resistance of 10^10 ohm and is commonly used in commercial applications requiring a reliable, polarized housing for signal currents up to 3 A.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
DM1AA-SF-PEJ(72)
Hirose Electric
The Hirose Electric DM1AA-SF-PEJ(72) is a PCMCIA connector with 9 contacts, featuring a mating contact pitch of 0.098". It utilizes liquid crystal polymer insulator material and offers surface mount termination. Ideal for board mounting applications requiring a right angle mounting style.
71600-010LF
71600-010LF by Amphenol is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features an insulation resistance of 50G ohm, operates b/w -65 to 105°C, and has a durability of 100 cycles. Ideal for commercial applications requiring reliable signal connections in tight spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
51281-0594
Molex 51281-0594 FFC/FPC connector with 0.020" pitch, 5 contacts, and glass-filled LCP insulator. Ideal for board mounting in commercial applications. Operating temp -20 to 85°C, UL94V-0 rated, female contact type with surface mount termination.
51281-0598
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.02; Mounting Option-1: LOCKING;
51281-0894
51281-0894 by Molex is a FFC/FPC connector with 8 contacts, 0.020" pitch, and 0.5A signal rating. Ideal for board mounting applications, it features GLASS FILLED LIQUID CRYSTAL POLYMER insulation material and operates b/w -20 to 85°C.
51281-1294
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: .319 inch; Termination Contact Finish: NOT APPLICABLE;
51281-1494
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Body Length: .358 inch;
51281-1898
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE; UL Flammability Code: 94V-0;
51281-0898
The Molex 51281-0898 is a FFC/FPC connector with 8 contacts, featuring a mating contact pitch of 0.02" and insulator material made of glass-filled liquid crystal polymer. It is used for board mounting with a right-angle mounting style, suitable for applications requiring surface mount termination in compact spaces.
512811094
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 0.5;
51281-0940
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mounting Type: BOARD;
51281-0530
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Pattern: RECTANGULAR;
51281-0630
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Resistance: 20 mohm;
51281-0692
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mating Contact Pitch (inch): 0.020;
51281-0830
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Style: DUAL PRONG;
51281-0892
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mounting Style: RIGHT ANGLE;
51281-0930
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Insulation Resistance: 50000000 ohm;
51281-0992
51281-0540
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mixed Contacts: NO;
51281-0640
51281-0994
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: GLASS FILLED LIQUID CRYSTAL POLYMER; Termination Type: SURFACE MOUNT;
51281-0794
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Insulation Resistance: 50000000 ohm; Termination Type: SURFACE MOUNT; Mating Contact Pitch (inch): 0.020; Board Mounting Option: FITTING NAIL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved