Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; UL Flammability Code: 94V-0; Filter Feature: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$6.489
$6.229
Corphita
Combination Line Connectors 51233-2015 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
51233-2015 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
Zowie Technology
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Yangzhou Yangjie Electronics
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
D369-R33-NS1
TE Connectivity
TE Connectivity's D369-R33-NS1 is a Combination Line Connector with 3 contacts, rated at 500V and 5A. With a body size of 0.421" x 0.187" x 0.845", it is designed for applications requiring a polarized, preassembled female connector with crimp termination.
PL082X-301-10M8
AMPHENOL ICC
Combination Line Connectors;
DT04-2P-L012
TE Connectivity's DT04-2P-L012 is a 1.708" x 1.595" x 1.25" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125°C operation at 250V and 13A signal current. It features UL-rated polarization, panel mounting, and strain relief, making it ideal for applications requiring a polarized male receptacle with two contacts.
AT04-3P-KIT01
Amphenol
The Amphenol AT04-3P-KIT01 is a Combination Line Connector with dimensions of 0.96" x 0.827" x 1.7". It has a max operating temperature of 125°C and min of -55°C, suitable for applications requiring a rated current of 13A. This male connector features 3 contacts, copper alloy material, and is ideal for cable mounting in various electronic systems.
5-2232263-2
TE Connectivity 5-2232263-2 is a Combination Line Connector with dimensions 0.846" x 0.632" x 0.589". Rated for 600V, it operates b/w -55°C to 140°C. Ideal for panel mounting applications, it features UL and VDE standards compliance.
ATM04-4P
Amphenol's ATM04-4P is a combination line connector with a body size of 0.772" x 0.756" x 1.72". It has 2 rows and can handle temperatures from -55°C to 125°C. With a rated current of 7.5A, it is commonly used in cable applications as a male receptacle connector with square pin sockets.
DT04-08PA-C015
TE Connectivity's DT04-08PA-C015 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
AT06-2S-SR02BLK
The Amphenol AT06-2S-SR02BLK is a combination line connector with 2 contacts, rated for 13A signal current. Featuring a compact design of 0.594" x 0.72" x 1.61", it uses POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring female contact gender and plug body style.
DTM06-08SA
TE Connectivity's DTM06-08SA is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring UL compliance and polarization key feature.
1928403736
Robert Bosch
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; Body Width: .898 inch; Maximum Operating Temperature (Cel): 150;
30700-1080
Molex
The Molex 30700-1080 is a Combination Line Connector with dimensions of 0.608" x 0.928" x 1.243". It features SYNDIOTACTIC POLYSTYRENE insulator material, rated for -40 to 100°C operating temperature range, and can handle up to 7A signal current. Ideal for board mounting applications requiring an 8-contact male SQ PIN-SKT connector.
1473416-1
TE Connectivity's 1473416-1 is a Combination Line Connector with dimensions of 1.266" x 1.268" x 1.36". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40°C to 125°C. With a total of 26 contacts, it is used in cable mounting applications at mains connector ratings of 115/230VAC.
DT06-2S-E003
TE Connectivity's DT06-2S-E003 is a 1.228" x 0.591" x 0.621" combination line connector with 250V rated voltage and -55 to 125°C operating temperature range. Featuring UL 94V-0 flammability code, it has 13A signal current rating and glass-filled polyamide insulator for cable mounting applications.
12047937
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Insulator Material: POLYAMIDE66; IEC Conformity: NO;
9-1452380-9
TE Connectivity's 9-1452380-9 is a Combination Line Connector with dimensions 3.067" x 1.654" x 1.406". Rated for 14V, it has GLASS FILLED POLYAMIDE insulator and supports up to 30A signal current. Ideal for applications requiring a polarized connector with 96 contacts and operating temperatures from -40°C to 130°C.
180923
TE Connectivity 180923 is a Combination Line Connector with POLYAMIDE insulator. It has 2 contacts, suitable for cable mounting with 0.9"x.453"x.902" dimensions. Operating from -40 to 105°C, it's a female receptacle connector for mains rated at 115/230VAC, mating with 180924.
1-967622-1
TE Connectivity 1-967622-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It features 12 contacts in 3 rows, polarized key, and female contact gender. Ideal for cable mounting applications at 115/230VAC mains connector rating.
AT06-12SA-SS01
Amphenol's AT06-12SA-SS01 is a 2-row COMBINATION LINE CONNECTOR with 12 contacts, rated at 13A. It has dimensions of 1.598" x 0.815" x 1.354" and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT06-12PA-SS01 FEMALE connectors using RND PIN-SKT contact style.
54201415
Aptiv
Aptiv's 54201415 is a Combination Line Connector with dimensions of 1.311" x 1.006" x 1.378". It features POLYAMIDE insulator material, 3 loaded rows, and 14 male contacts. Ideal for automotive applications requiring reliable multi-contact connections in compact spaces.
5007620481
Molex 5007620481 is a COMBINATION LINE CONNECTOR with 48 contacts, Tin (Sn) - Nickel (Ni) finish. It uses SOLDER termination and mounts on BOARD. Ideal for applications requiring reliable male connectors like mating with 64320-1311, 64320-3311.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved