Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 51110-2051 is a 20-contact board connector with 0.079" pitch, glass-filled polyester insulator, and -40 to 105°C operating temperature range. Ideal for commercial applications, it features crimp termination, polarized keying, and UL94V-0 flammability rating.
Median Price
$0.392
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Sager
1+ parts
$0.213
100+ parts
-
1k+ parts
10k+ parts
Avnet
$0.268
Arrow
$0.313
$0.274
$0.249
Heilind Electronics
$0.345
$0.298
$0.281
Interstate Connecting
$0.405
$0.355
$0.320
RS Americas
$0.630
$0.504
$0.441
Distrelec
$0.675
$0.600
$0.547
DigiKey
$0.750
$0.515
Mouser Electronics
$0.760
$0.459
$0.458
RS (Exports)
$0.780
Element14
$1.010
$0.665
$0.521
TTI
$0.308
$0.292
$0.280
TTI Europe
$0.358
$0.338
$0.325
Verical
$0.242
Chip1Stop
$0.327
Newark
$0.592
$0.517
NEP Electronics
Master Electronics
$0.368
Farnell
$0.351
Powell Electronics
$0.400
$0.395
PSC Electronics
Digiode
$0.202
Maritex
$0.332
$0.248
$0.187
$0.152
Nova Conductors
$0.394
TME
$0.670
$0.558
FDH Electronics
$0.744
$0.601
$0.560
Vyrian
IBS Electronics
$0.381
NAC Semi
Electro Mavin
EMSNET
VNN
Mil-Aero Solutions, Inc.
LWI Electronics Inc
Component Sense
Resion
Semicontronic
$0.108
$0.105
Corphita
$0.192
Argo Parts USA
$0.383
Netroflash
$0.375
$0.367
Modulus Dynamics
$0.403
Continental Prestige Electronics
$0.522
$0.343
$0.307
Andel Nordic
$2.868
$2.753
Aztec Data Supply Inc.
$8.697
S.R.D Solutions
Kepictronics
Futuretech Components
EMSNET (Excess)
Assy Fe
Robosynatics
$0.792
Lucentia Tech
Perfect Parts
Standard Data Resources (Excess)
Closer contact pitch allows for more contacts to be placed in a smaller space, increasing connectivity options on the board.
A standard body length ensures compatibility with various devices and applications.
High insulation resistance helps prevent electrical leakage and ensures signal integrity.
Compact body width allows for efficient use of space on the board.
A sufficient body depth accommodates the contacts and wiring securely.
Durable and heat-resistant material provides protection and longevity to the connector.
Having two rows allows for increased connectivity options and versatility in usage.
High maximum operating temperature ensures stable performance in various environments.
Low minimum operating temperature allows for usage in cold conditions without compromising performance.
Specifically designed for board connections, ensuring a secure and reliable connection.
UL 94V-0 rating indicates high flame resistance, making this connector safe for use in different settings.
The polarization key helps to ensure correct alignment during mating, preventing incorrect connections.
Neutral black color easily blends with various board designs and aesthetics.
Compliance with UL standards ensures quality and safety of the connector.
Having 20 contacts provides ample connectivity options for various applications.
Crimp termination allows for a secure and reliable connection between the cable and connector.
Female contacts are commonly used for receiving pins and ensure proper mating with corresponding male connectors.
Low contact resistance ensures minimal signal loss and reliable conductivity.
Receptacle style allows for easy and secure connection with corresponding male connectors.
Square pin socket contact style provides a robust and secure connection.
Locking mounting option ensures the connector remains securely attached to the mounting surface.
Rectangular contact pattern allows for efficient use of space and easy alignment during mating.
Commercial-grade reliability ensures consistent performance in various commercial applications.
Headers & Edge Type Connectors 51110-2051 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
51110-2051 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Boca Semiconductor
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Telefunken Microelectronics
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
B2PS-VH-R(LF)(SN)
J S T Mfg
B2PS-VH-R(LF)(SN) by J S T Mfg is a 10A BOARD CONNECTOR with 0.156" pitch, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. Ideal for PCBs with RECTANGULAR contact pattern, it offers high insulation resistance of 1Gohm and operates b/w -25 to 85°C.
FTSH-105-01-F-DV-K-FR
Samtec
Samtec's FTSH-105-01-F-DV-K-FR is a 10-contact, 2-row male board connector with tin finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in headers & edge type connectors.
61000418221
Wuerth Elektronik & Kg
61000418221 by Wurth Elektronik is a 4-contact board connector with 0.1" pitch, gold over nickel finish, and polyamide insulator. It operates b/w -40 to 125°C, has a dielectric voltage of 500VAC, and offers an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable signal transmission in black insulator color.
TSW-103-07-G-S-LL
The Samtec TSW-103-07-G-S-LL is a 3-contact board connector with gold-plated phosphor bronze contacts. It has a mating contact pitch of 0.1" and termination via soldering, making it ideal for commercial applications requiring reliable connections on PCBs with a terminal pitch of 2.54mm.
70553-0001
Molex
Molex 70553-0001 is a board connector with 0.1" pitch, matte tin finish, and glass-filled polycarbonate insulator. Ideal for commercial applications, it features right-angle mounting and solder termination for reliable connections in electronic devices.
MM70-314B1-2-R300
Japan Aviation Electronics Industry
MM70-314B1-2-R300 by Japan Aviation Electronics features a mating contact pitch of 0.02", insulator made of glass-filled liquid crystal polymer, and total 314 contacts. It is a card edge connector with UL flammability code 94V-0, suitable for board mounting applications requiring right angle mounting style and surface mount termination type.
831-43-025-10-001000
Mill-max Mfg
831-43-025-10-001000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish, and 2mm pitch. Ideal for board-to-board connections in various electronic applications due to its FEMALE contact gender, SOLDER termination, and STRAIGHT mounting style.
B2B-PH-SM4-TB
B2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, suitable for applications requiring 2A signal current. Featuring POLYAMIDE insulator and COPPER ALLOY contacts, it has an operating temperature range of -25 to 85°C and dielectric voltage of 800VAC.
1231
Singatron Enterprise
BOARD CONNECTOR; DIN Conformance: NO; IEC Conformity: NO; Manufacturer Series: 1231; MIL Conformity: NO;
S6B-PH-SM4-TB(LF)(SN)
S6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.079" pitch, 800VAC dielectric voltage, and -25 to 85°C operating range. Ideal for PCB applications requiring male contact, surface mount termination, and right-angle mounting.
47334-0001
The Molex 47334-0001 is a PCB connector with a mating contact pitch of 0.043" and a body length of 0.551". It has an insulation resistance of 100MΩ and is commonly used in board mounting applications.
DTM04-2P-E003
TE Connectivity
DTM04-2P-E003 by TE Connectivity is a 1.68" x 0.651" x 0.638" board connector with GLASS FILLED POLYAMIDE insulator material. It has a rated voltage of 250V and can operate in temperatures ranging from -55 to 125°C. This male connector with one port and two contacts is suitable for cable mounting applications.
04R-JWPF-VSLE-S
BOARD CONNECTOR; MIL Conformity: NO; Contact Material: NOT SPECIFIED; DIN Conformance: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
324-91-161-41-002000
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e0; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Contact Material: BERYLLIUM COPPER;
51021-0300
The Molex 51021-0300 is a board connector with 3 contacts, 0.049" pitch, and insulation resistance of 100M ohm. It has a temperature range of -40 to 85°C, ideal for commercial applications requiring reliable female crimp connectors in cable assemblies with locking mounting option.
66506-322LF
Amphenol Communications Solutions
Amphenol's 66506-322LF is a 16-contact, 2-row board connector with a terminal pitch of 2.54mm and UL94V-0 flammability rating. It features male contacts for solder termination and straight mounting style, ideal for headers & edge type connectors in various electronic applications.
FTSH-105-01-L-DV-K-FR
Samtec's FTSH-105-01-L-DV-K-FR is a 10-contact, 2-row male board connector with tin finish and nickel barrier. Featuring a terminal pitch of 1.27mm, it is UL 94V-0 rated for surface mount applications. Ideal for use in headers & edge type connectors on PCBs.
31249116
Ria Electronic
BOARD CONNECTOR; Option: GENERAL PURPOSE;
61201021621
61201021621 by Wurth Elektronik is a board connector with 10 contacts, gold finish, and 3A signal current rating. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
B2B-PH-K-S(LF)(SN)
B2B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 800VAC dielectric voltage, and 2A signal current rating. Ideal for applications requiring high insulation resistance, POLYAMIDE66 insulator material, and TIN COPPER termination finish in a compact 0.232" x 0.177" x 0.236" body size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
51110-1050
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mixed Contacts: NO;
51110-0450
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Additional Features: MILLI-GRID, COMPATIBLE CONTACTS: 50394-8051; 50394-8052, POLARIZED; Maximum Insertion Force (N): 1.946;
51110-1056
Molex 51110-1056 is a 2-row board connector with 10 contacts, 0.079" pitch, and 0.402" body length. It uses crimp termination for 24-30 AWG wires in cable mounting applications. The polarized housing ensures secure connections meeting UL standards for commercial reliability.
51110-1051
The Molex 51110-1051 is a board connector with 2 rows, 10 contacts, and a mating contact pitch of 0.079". It has a body length of 0.402", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for cable mounting applications requiring durable connectors with female contacts and crimp terminations.
51110-1451
The Molex 51110-1451 is a board connector with 14 contacts, 2 rows, and a mating contact pitch of 0.079". It features a body length of 0.559", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for cable mounting applications requiring durable connectors with polarization key and UL94V-0 flammability rating.
51110-0660
Molex 51110-0660 is a 2-row board connector with 6 contacts, featuring a mating contact pitch of 0.079". It has an insulation resistance of 1G ohm and operates b/w -40 to 105°C. Ideal for cable mounting applications, it uses crimp termination and has a UL flammability rating of 94V-0.
51110-1060
Molex 51110-1060 is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.079". With insulation resistance of 1G ohm and rated current of 2A, it's ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -40 to 105°C.
51110-1251
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 105; Insulator Material: GLASS FILLED POLYESTER;
51110-1651
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Filter Feature: NO; Mating Contact Pitch (inch): 0.079;
51110-2050
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; No. of Connectors: ONE;
51110-0860
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Insertion Force (N): 1.946; Mating Contact Pitch (inch): 0.079;
51110-2451
Molex 51110-2451 is a 24-contact board connector with 0.079" pitch, glass-filled polyester insulator, and -40 to 105°C operating range. Ideal for commercial applications requiring polarized key, crimp termination, and locking mounting on cables.
51110-0650
The Molex 51110-0650 is a board connector with a mating contact pitch of 0.079 inches. It has a body length of 0.244 inch and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in commercial applications where reliable and secure connections are required.
51110-1260
The Molex 51110-1260 is a board connector with a mating contact pitch of 0.079 inches and a body length of 0.48 inch. It has an insulation resistance of 1,000,000,000 ohm and can withstand temperatures ranging from -40 to 105°C. This connector is commonly used in commercial applications requiring reliable connections.
51110-0850
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body Depth: .276 inch;
51110-0851
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Insertion Force (N): 1.96;
51110-1851
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; UL Flammability Code: 94V-0;
51110-2651
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 26; No. of Rows Loaded: 2;
51110-1256
Molex 51110-1256 is a 2-row board connector with 12 contacts, ideal for commercial applications. Featuring a mating contact pitch of 0.079", it supports wire sizes from 30 to 24 AWG. The receptacle-style connector has a polarized housing and uses crimp termination for secure cable mounting.
51110-2052
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mounting Option-1: LOCKING; Total No. of Contacts: 20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved