Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 51110-0860 is a 2-row board connector with 8 contacts, featuring a mating contact pitch of 0.079". It has an insulation resistance of 1G ohm and operates b/w -40°C to 105°C. Ideal for commercial applications, it uses crimp termination and supports wire sizes from 30 AWG to 24 AWG.
Median Price
$0.301
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
Arrow
1+ parts
$0.178
100+ parts
$0.171
1k+ parts
-
10k+ parts
Avnet
$0.232
Interstate Connecting
$0.277
$0.243
$0.219
Verical
$0.284
$0.262
Heilind Electronics
$0.305
$0.257
$0.241
Mouser Electronics
$0.420
$0.292
$0.253
Distrelec
$0.423
$0.369
$0.271
RS (Exports)
$0.540
$0.460
$0.389
RS Americas
$0.545
$0.415
$0.333
DigiKey
$0.550
$0.360
$0.283
Chip1Stop
$0.618
$0.390
Powell Electronics
$0.287
Master Electronics
$0.297
$0.264
TTI
NEP Electronics
TTI Europe
$0.211
$0.157
$0.154
Element14
$0.337
$0.323
$0.309
Newark
$0.258
$0.201
PSC Electronics
Digiode
$0.169
DF Sales Co.
Nova Conductors
$0.295
TestEquity
$0.310
TME
$0.330
$0.218
$0.200
Component Electronics Inc.
$3.850
$2.880
$2.500
Vyrian
IBS Electronics
$0.320
$0.302
VNN
ACDS - Activité Composants Distribution Service
Resion
Pegasus Components GmbH
Connector Distribution Corp
Right Parts Inc.
FDH Electronics
Inventory MP
Bristol Electronics
Elcom Components
Bisco
Sensible Micro Corp
$0.224
$0.207
J & M Industries LLC
Semicontronic
$0.124
$0.121
$0.120
Corphita
$0.160
Aranea Global
$0.289
$0.278
Argo Parts USA
$0.286
Continental Prestige Electronics
$0.513
$0.299
$0.242
Andel Nordic
$0.786
$0.755
Aztec Data Supply Inc.
$10.118
Perfect Parts
Authorized Procurement Solutions
Kepictronics
Robosynatics
$9.910
$9.708
Lucentia Tech
Cyclops Electronics Ltd (Excess)
Speed Components Ltd (Excess)
EMSNET (Excess)
Close contact pitch allows for efficient signal transmission and connectivity.
High insulation resistance ensures reliable and safe operation.
Can withstand high temperatures, suitable for various operating environments.
Wide temperature range allows for versatile use in different conditions.
Can handle a decent amount of current for signal transmission.
Compatible with small wire sizes for flexibility in connectivity.
Can be easily mounted on cables for convenient installation.
Crimping termination provides a secure and reliable connection.
Female contacts are versatile and widely used in electronic applications.
Receptacle design allows for easy insertion and removal of connections.
Headers & Edge Type Connectors 51110-0860 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
51110-0860 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Packaging - Carton Box, SPQ 22/Oct/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
World Products
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
Hy Electronic
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Transistor & Electronic
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
B2B-PH-SM4-TB(LF)(SN)
J S T Mfg
B2B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, POLYAMIDE6T insulator, and -25 to 85°C operating range. It has 2 contacts for surface mount applications on PCBs.
3220-10-0300-00-TR
Cnc Tech
3220-10-0300-00-TR by Cnc Tech is a BOARD CONNECTOR with 2 rows, 10 contacts, and BRASS material. It features Gold (Au) termination with Nickel (Ni) barrier for durability. Ideal for surface mount applications in electronics requiring high-quality male connectors.
66506-313LF
AMPHENOL ICC
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
823-22-020-10-001101
Mill-max Mfg
823-22-020-10-001101 by Mill-max Mfg is a board stacking connector with 20 contacts in 2 rows. It features gold over nickel termination, UL94V-0 flammability rating, and solder termination type. Ideal for applications requiring reliable male connectors with straight mounting style.
51700
Amphenol Icc's 51700 board connector features mixed contacts, UL 94V-0 flammability rating, and 2.54mm terminal pitch. Ideal for applications requiring male contact gender, press fit or solder termination, and straight mounting style.
22-04-1021
Molex
Molex 22-04-1021 header connector features 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board connections in applications requiring a durable, polarized housing with male SQ pin-skt contacts.
BM08B-SRSS-TB(LF)(SN)
BM08B-SRSS-TB(LF)(SN) by J S T Mfg is a 8-contact BOARD CONNECTOR with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features POLYAMIDE insulator, COPPER ALLOY contacts, and operates b/w -25 to 85 °C.
FTSH-105-01-L-DV-K-A-TR
Samtec
Samtec's FTSH-105-01-L-DV-K-A-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring gold over nickel finish, it has a rated signal current of 3.4A and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
T821110A1S100CEU
Amphenol
Amphenol T821110A1S100CEU is a 2-row board connector with 10 contacts, featuring gold flash over nickel finish. It uses brass as contact material and has a terminal pitch of 2.54mm for solder termination. Ideal for applications requiring male connectors in straight mounting style on boards with UL94V-0 flammability rating.
02T-JWPF-VSLE-S
BOARD CONNECTOR; DIN Conformance: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
1761606-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Manufacturer Series: 1761606; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
B2B-PH-K-S-GW
B2B-PH-K-S-GW by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2mm and is ideal for applications requiring male contact gender in straight mounting style on boards.
7-188275-4
TE Connectivity
TE Connectivity 7-188275-4 is a FFC/FPC connector with 0.05" contact pitch, rated for 1.5A signal current at 100V. With POLYAMIDE46 insulator and UL94V-0 flammability rating, it's ideal for board mounting applications requiring high reliability in commercial settings.
B2B-XH-A-E(LF)(SN)
B2B-XH-A-E(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for commercial applications, this connector has a rated current of 3A and operates b/w -25 to 85 °C temperatures.
FTSH-110-01-L-DV-K-A-P-TR
The Samtec FTSH-110-01-L-DV-K-A-P-TR is a 20-contact board connector with a mating contact pitch of 0.05". It features tin termination finish, liquid crystal polymer insulator, and gold mating contact finish. Ideal for commercial applications requiring a reliable, straight-mount male connector with surface mount termination.
DTM06-2S
TE Connectivity's DTM06-2S is a 2-contact board connector with 0.157" pitch, rated for 7.5A signal current at 250V. Its glass-filled polyamide insulator and UL94V-0 flammability rating make it ideal for cable mounting applications requiring a polarized housing and wire termination.
61300411121
Wuerth Elektronik & Kg
61300411121 by Wurth Elektronik is a BOARD CONNECTOR with Mating Contact Pitch of 0.1", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 500VAC. It is used for commercial applications in electronics requiring a rated current of 3A, operating temperatures from -40 to 125°C, and a total of four contacts on one connector for signal transmission.
851-
851- by Mill-max Mfg is a BOARD CONNECTOR with 1.27mm Terminal Pitch, SOLDER Termination Type, and MALE Contact Gender. It is used in Headers & Edge Type Connectors for STRAIGHT Mounting on PCBs.
1367073-1
TE Connectivity 1367073-1 is a 2-row board connector with 0.031" mating contact pitch. Featuring liquid crystal polymer insulator, it has a max operating temperature of 85°C and -55°C min. Ideal for commercial applications, this female connector offers 20 contacts and surface mount termination.
SHF-105-01-L-D-SM
SHF-105-01-L-D-SM by Samtec is a 2-row board connector with a mating contact pitch of 0.05". Featuring gold over nickel finish, it has a rated signal current of 1.75A and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
51110-1050
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mixed Contacts: NO;
51110-0450
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Additional Features: MILLI-GRID, COMPATIBLE CONTACTS: 50394-8051; 50394-8052, POLARIZED; Maximum Insertion Force (N): 1.946;
51110-1056
Molex 51110-1056 is a 2-row board connector with 10 contacts, 0.079" pitch, and 0.402" body length. It uses crimp termination for 24-30 AWG wires in cable mounting applications. The polarized housing ensures secure connections meeting UL standards for commercial reliability.
51110-1051
The Molex 51110-1051 is a board connector with 2 rows, 10 contacts, and a mating contact pitch of 0.079". It has a body length of 0.402", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for cable mounting applications requiring durable connectors with female contacts and crimp terminations.
51110-1451
The Molex 51110-1451 is a board connector with 14 contacts, 2 rows, and a mating contact pitch of 0.079". It features a body length of 0.559", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for cable mounting applications requiring durable connectors with polarization key and UL94V-0 flammability rating.
51110-0660
Molex 51110-0660 is a 2-row board connector with 6 contacts, featuring a mating contact pitch of 0.079". It has an insulation resistance of 1G ohm and operates b/w -40 to 105°C. Ideal for cable mounting applications, it uses crimp termination and has a UL flammability rating of 94V-0.
51110-1060
Molex 51110-1060 is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.079". With insulation resistance of 1G ohm and rated current of 2A, it's ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -40 to 105°C.
51110-2051
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .189 inch; Contact Style: SQ PIN-SKT;
51110-1251
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 105; Insulator Material: GLASS FILLED POLYESTER;
51110-1651
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Filter Feature: NO; Mating Contact Pitch (inch): 0.079;
51110-2050
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707VAC; No. of Connectors: ONE;
51110-2451
Molex 51110-2451 is a 24-contact board connector with 0.079" pitch, glass-filled polyester insulator, and -40 to 105°C operating range. Ideal for commercial applications requiring polarized key, crimp termination, and locking mounting on cables.
51110-0650
The Molex 51110-0650 is a board connector with a mating contact pitch of 0.079 inches. It has a body length of 0.244 inch and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in commercial applications where reliable and secure connections are required.
51110-1260
The Molex 51110-1260 is a board connector with a mating contact pitch of 0.079 inches and a body length of 0.48 inch. It has an insulation resistance of 1,000,000,000 ohm and can withstand temperatures ranging from -40 to 105°C. This connector is commonly used in commercial applications requiring reliable connections.
51110-0850
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body Depth: .276 inch;
51110-0851
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Insertion Force (N): 1.96;
51110-1851
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; UL Flammability Code: 94V-0;
51110-2651
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 26; No. of Rows Loaded: 2;
51110-1256
Molex 51110-1256 is a 2-row board connector with 12 contacts, ideal for commercial applications. Featuring a mating contact pitch of 0.079", it supports wire sizes from 30 to 24 AWG. The receptacle-style connector has a polarized housing and uses crimp termination for secure cable mounting.
51110-080
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; Mounting Type: CABLE; Contact Style: SQ PIN-SKT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved