Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 5055680371 is a board connector with 0.05" mating contact pitch, suitable for applications requiring a durable male connector with 1.5A signal current rating. With a dielectric voltage of 70.7VAC and operating temperature range from -40 to 105°C, it offers reliable performance in various electronic devices.
Median Price
$0.522
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.389
1k+ parts
$0.380
10k+ parts
$0.325
Mouser Electronics
$0.660
$0.478
$0.426
$0.347
DigiKey
$0.477
-
Chip1Stop
$0.425
Verical
$0.412
Avnet
Newark
$0.640
TTI
$0.324
Digiode
$0.282
Nova Conductors
$0.444
IBS Electronics
$0.400
Vyrian
VNN
Semtec, LLC
Corphita
$0.267
Continental Prestige Electronics
$0.411
$0.403
Argo Parts USA
$0.399
Netroflash
Aztec Data Supply Inc.
$4.988
Andel Nordic
$9.586
$9.203
Perfect Parts
Assy Fe
EMSNET (Excess)
Glotronic Ltd.
Authorized Procurement Solutions
The small contact pitch ensures secure and precise connections, making this product suitable for applications requiring high reliability.
The compact body length saves space on the PCB and allows for dense packing of components, making it ideal for applications with limited space.
The high dielectric voltage rating ensures safe operation and reliable insulation, making this product suitable for high-voltage applications.
The high maximum operating temperature allows for use in a wide range of environments, making this product versatile and durable.
Polyamide is a durable and insulating material, ensuring reliable performance and electrical insulation in various conditions.
The high rated current allows for the transmission of stronger signals, making this product suitable for applications requiring high signal integrity.
The board connector type is commonly used and compatible with a wide range of PCBs, making this product versatile and easy to integrate.
Headers & Edge Type Connectors 5055680371 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
5055680371 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Good-ark Electronics
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comset Semiconductors
SHF-105-01-L-D-SM-LC
Samtec
The Samtec SHF-105-01-L-D-SM-LC is a 2-row, 10-contact board connector with Tin-Nickel finish. Featuring a terminal pitch of 1.27mm, it is designed for surface mount applications. Ideal for use in various electronic devices requiring male connectors with straight mounting style.
5023520400
Molex
The Molex 5023520400 is a board connector with a mating contact pitch of 0.079 inches and a body length of 0.472 inches. It has an insulation resistance of 1,000,000,000 ohms and is commonly used in commercial applications for its durability and right angle mounting style.
B5B-PH-SM4-TB(LF)(SN)
J S T Mfg
B5B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, suitable for applications requiring 2A signal current. Features include POLYAMIDE66 insulator, 800VAC dielectric voltage, and TIN (Sn) finish over COPPER contacts. Ideal for PCB mounting with RECTANGULAR contact pattern and WHITE insulator color.
801-43-020-10-002000
Mill-max Mfg
801-43-020-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 20 contacts, featuring MATTE TIN OVER NICKEL finish. It has a terminal pitch of 2.54mm and uses SOLDER termination. Ideal for applications requiring FEMALE contact gender in STRAIGHT mounting style on a PCB.
7-215083-6
TE Connectivity
TE Connectivity 7-215083-6 is a dual-row board connector with 0.1" pitch, rated for 100V and 1.5A signal current. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, suitable for commercial applications in cable mounting with 28 AWG wires.
S3B-PH-SM4-TB(LF)(SN)
S3B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with surface mount termination and right angle mounting style.
52271-1669
Molex 52271-1669 is a FFC/FPC connector with 16 contacts, mating pitch of 0.039", and body width of 0.118". It features TIN over nickel termination finish, polyamide insulator, and UL94V-0 flammability rating. Ideal for board mounting applications requiring surface mount termination in commercial settings.
1367073-1
TE Connectivity 1367073-1 is a 2-row board connector with 0.031" mating contact pitch. Featuring liquid crystal polymer insulator, it has a max operating temperature of 85°C and -55°C min. Ideal for commercial applications, this female connector offers 20 contacts and surface mount termination.
B2B-PH-SM4-TB
B2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, suitable for applications requiring 2A signal current. Featuring POLYAMIDE insulator and COPPER ALLOY contacts, it has an operating temperature range of -25 to 85°C and dielectric voltage of 800VAC.
B6BZR(LF)(SN)
B6BZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" mating contact pitch, 500VAC dielectric voltage, and 1A signal current rating. It is used in commercial applications, featuring GLASS FILLED POLYAMIDE insulation material and BRASS contact material for reliability.
801-47-053-10-002000
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
B04B-PASK(LF)(SN)
B04B-PASK(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" mating contact pitch and 800VAC dielectric voltage. Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, it operates b/w -25 to 85 °C and has UL 94V-0 flammability rating. Ideal for PCB applications requiring high insulation resistance and rated current of 3A.
SM04B-SRSS-TB(LF)(SN)
SM04B-SRSS-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contacts, surface mount termination, and right-angle mounting.
TSW-104-07-G-S
Samtec TSW-104-07-G-S is a 4-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body length of 0.4" and width of 0.098". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C, meeting UL standards.
3-1827253-6
TE Connectivity 3-1827253-6 is a 2-row stacking connector with 220 contacts, 0.02" pitch, and 200VAC dielectric voltage. Ideal for board mounting applications, it features a polyethylene insulator and operates b/w -40 to 85°C.
22-23-2021
Molex 22-23-2021 header connector features 0.1" mating contact pitch, 0.194" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with UL and CSA standards compliance.
HTSW-104-07-G-S
Samtec's HTSW-104-07-G-S is a 4-contact board connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.1", it has a body length of 0.4" and operates b/w -55°C to 125°C. Ideal for commercial applications, this header connector has a solder termination type and UL94V-0 flammability rating.
B2PS-VH
B2PS-VH by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 3.96mm and is ideal for right angle mounting on boards. This UL 94V-0 rated connector is commonly used in applications requiring secure male connections.
475532001
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
DF11-8DP-2DSA(01)
Hirose Electric
DF11-8DP-2DSA(01) by Hirose Electric is a 2-row, 8-contact board connector with gold over nickel termination. Featuring a mating contact pitch of 0.079", it offers high insulation resistance of 1Gohm and withstands up to 650VAC. Ideal for commercial applications, this connector has a temperature range from -30°C to 85°C and boasts durability of 50 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5055960401
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
5055960801
BOARD CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
5055960601
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
5055650501
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: .325 inch; Body or Shell Style: RECEPTACLE;
5055750271
5055670471
Headers and Edge Type Connectors; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
5055750471
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR; Durability: 30 Cycles;
5055512420
BOARD STACKING CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5055670271
Molex 5055670271 is a board connector with mating contact pitch of 0.049", insulation resistance of 100M ohm, and operating temperature range from -40 to 105°C. Ideal for applications requiring a male surface mount connector with right angle mounting style and rectangular PCB contact pattern.
5055680481
The Molex 5055680481 is a board connector with a mating contact pitch of 0.049 inches. It has a body length of 0.325 inch and a body width of 0.152 inch. This plug-style connector is commonly used in surface mount applications for PCBs, offering multiple mating options and UL flammability code 94V-0 compliance.
5055680581
Molex 5055680581 is a board connector with 5 contacts, 0.049" pitch, and GLASS FILLED POLYAMIDE insulator. Ideal for surface mount applications on PCBs due to its compact 0.374" x 0.152" x 0.165" dimensions and UL 94V-0 flammability rating. This male plug connector follows UL standards for reliable performance in various electronic devices.
5055670371
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 707VAC; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel;
5055681451
5055670671
Molex 5055670671 is a board connector with 6 contacts, rated at 1.5A signal current. It features a mating contact pitch of 0.049", GLASS FILLED POLYAMIDE insulator, and operates b/w -40 to 105°C. Ideal for applications requiring a right-angle plug with surface mount termination on PCBs.
5055750671
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
5055670331
5055680681
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Total No. of Contacts: 6;
5055680881
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Empty Shell: NO; Termination Contact Finish: NOT APPLICABLE;
5055670571
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 707VAC; No. of Connectors: ONE; UL Flammability Code: 94V-0;
5055680981
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 70.7VAC; No. of Connectors: ONE; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved