Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 75710-5006 is a board connector with 132 contacts in 11 rows, featuring a mating contact pitch of 0.073". It has a body width of 0.917" and termination contact finish of TIN over NICKEL. Ideal for commercial applications requiring reliable right-angle mounting on PCBs.
Median Price
$37.240
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Arrow
1+ parts
$15.474
100+ parts
-
1k+ parts
10k+ parts
Verical
$36.720
$34.730
Mouser Electronics
$42.520
$39.100
$38.520
DigiKey
$42.710
Farnell
$62.710
Master Electronics
$37.060
Newark
$44.980
Powell Electronics
$28.590
$26.640
PEI Genesis
Chip1Stop
$25.500
Digiode
$14.700
NAC Semi
$18.990
Nova Conductors
$23.160
TestEquity
$32.310
TME
$119.890
$102.330
Vyrian
VNN
IBS Electronics
$38.961
MRC Electronics
Velocity Electronics
Prism Electronics
Inventory MP
Bristol Electronics
Andel Nordic
$1.575
$1.512
Aztec Data Supply Inc.
$8.349
Semicontronic
$13.150
$12.821
$12.756
Corphita
$13.927
AZTECH Wire
$17.114
Advanced Electronics
$19.181
$18.222
Continental Prestige Electronics
$22.255
$21.810
Netroflash
$22.697
Argo Parts USA
Perfect Parts
Assy Fe
The close proximity of mating contacts ensures a secure and reliable connection, making this product suitable for high-performance applications.
The compact body width allows for efficient use of space on the PCB while still providing a large number of contacts, making it suitable for densely populated boards.
The use of Tin over Nickel as termination contact finish ensures good conductivity and corrosion resistance, improving the overall reliability of the connector.
The insulator material provides excellent mechanical strength and thermal stability, making the connector suitable for harsh environmental conditions.
Having 11 rows loaded with contacts allows for a high density of connections, making this product suitable for applications requiring multiple connections.
The UL 94V-0 flammability rating indicates that the connector meets stringent fire safety standards, making it a reliable and safe choice for use in various applications.
With a total of 132 contacts, this connector offers a high level of connectivity, making it suitable for applications that require a large number of connections.
Headers & Edge Type Connectors 75710-5006 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
75710-5006 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Multiple Devices Location 17/Nov/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
BAV99
Itt Semiconductor
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
CC0603KRX7R9BB104
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
General Instrument
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1-104257-1
TE Connectivity 1-104257-1 is a board connector with 12 contacts, 0.1" pitch, and 600VAC dielectric voltage. Ideal for commercial applications, it has a temperature range of -65 to 105°C and insulation resistance of 5G ohm.
BM04B-ACHSS-A-GAN-TF(LF)(SN)
J S T Mfg
BM04B-ACHSS-A-GAN-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and GOLD OVER NICKEL finish. It has a terminal pitch of 1.2mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
DM3D-SF
Hirose Electric
The Hirose Electric DM3D-SF is a CARD EDGE CONNECTOR with 0.043" Mating Contact Pitch, 500VAC Dielectric Withstanding Voltage, and 1000000000 ohm Insulation Resistance. It features a LIQUID CRYSTAL POLYMER insulator material and is suitable for commercial applications requiring a durable connector with FEMALE contact gender in RIGHT ANGLE mounting style.
10124017-1022121LF
Amphenol Communications Solutions
Amphenol's 10124017-1022121LF is a board stacking connector with 21 contacts, gold flash termination finish, and liquid crystal polymer insulator. It has a mating contact pitch of 0.039", dielectric voltage withstand of 707VAC, and rated signal current of 1A. Ideal for applications requiring durable male connectors with staggered PCB mounting pattern.
823-22-020-10-001101
Mill-max Mfg
823-22-020-10-001101 by Mill-max Mfg is a board stacking connector with 20 contacts in 2 rows. It features gold over nickel termination, UL94V-0 flammability rating, and solder termination type. Ideal for applications requiring reliable male connectors with straight mounting style.
3415
3m Electronic Products Division
CARD EDGE CONNECTOR; DIN Conformance: NO; IEC Conformity: NO; MIL Conformity: NO;
68612214122
Wuerth Elektronik & Kg
68612214122 by Wurth Elektronik is a FFC/FPC connector with 22 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features polyphenylene sulfide insulation material and tin over nickel contact finish. Operating b/w -25°C to 85°C, it offers high durability with 25 cycles and meets UL standards for reliability.
1-281742-0
TE Connectivity 1-281742-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and right angle mounting for various applications.
307-074-422-208
Edac
Edac 307-074-422-208 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm. With UL94V-0 flammability rating, it's ideal for applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
801-43-020-10-012000
Mill-max Mfg's 801-43-020-10-012000 is a 20-contact board connector with matte tin over nickel finish. Featuring a terminal pitch of 2.54mm, it is ideal for applications requiring a female socket connector with UL94V-0 flammability rating. Suitable for straight mounting on boards, this connector offers reliable solder termination.
53313-3465
Molex
Molex 53313-3465 is a 34-contact board connector with TIN finish. Featuring 2 loaded rows, it has a terminal pitch of 2mm and UL94V-0 flammability rating. Ideal for applications requiring male contacts, solder termination, and straight mounting style.
78171-0002
Molex 78171-0002 is a board connector with 0.047" mating contact pitch, suitable for commercial applications. Featuring gold over nickel termination finish, it offers high durability with 10 cycles and operates b/w -25 to 85°C temperature range. The connector has a total of 2 contacts and is UL certified with a flammability rating of 94V-0.
SHR-09V-S-B
SHR-09V-S-B by J S T Mfg is a 9-contact BOARD CONNECTOR with 0.039" pitch, 1A signal current rating, and 500VAC dielectric voltage. Ideal for CABLE mounting in applications requiring FEMALE contacts with POLYBUTYLENE TEREPHTHALATE insulation and UL94V-0 flammability rating.
54132-3062
Molex 54132-3062 FFC/FPC connector with 30 contacts, 0.020" pitch, and GOLD finish. Ideal for board mounting with POLYAMIDE insulator material. Operating temp -20 to 85 °C, UL94V-0 rated for commercial reliability.
QSH-030-01-L-D-A-K-TR
Samtec
QSH-030-01-L-D-A-K-TR by Samtec is a 60-contact, 2-row stacking connector with a mating contact pitch of 0.02". It features a liquid crystal polymer insulator, gold mating contact finish, and phosphor bronze contact material. Ideal for board-to-board applications requiring high durability and reliability in commercial settings.
DT06-08SA-P012
Deutsch
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mounting Type: CABLE;
S3B-PH-SM4-TB(LF)(SN)
S3B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with surface mount termination and right angle mounting style.
7-215079-6
TE Connectivity 7-215079-6: Headers & Edge Type Connectors with 0.05" pitch, 1A signal current rating, and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. Ideal for board mounting applications in commercial settings due to its durability and UL Flammability Code of 94V-0.
SLW12S-1C7LF
SLW12S-1C7LF by Amphenol is a 12-contact FFC/FPC connector with tin finish, phosphor bronze contacts, and UL 94V-0 flammability rating. Ideal for board mounting applications, it features a 2mm terminal pitch and solder termination. Perfect for high-density electronic devices requiring reliable female connectors.
1-2103124-1
TE Connectivity 1-2103124-1 is a BOARD CONNECTOR with GLASS FILLED POLYAMIDE insulator. It has 2 contacts, S0P2 arrangement, and operates b/w -40 to 140°C. Ideal for commercial applications requiring a MALE connector with BLADE PIN-SKT style in a RECEPTACLE shell.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
75710-1006
The Molex 75710-1006 header connector features a mating contact pitch of 0.145", insulation resistance of 1G ohm, and dielectric voltage rating of 750VAC. Ideal for board connections in commercial applications, this female connector has a total of 132 contacts with press-fit termination and right-angle mounting for durability up to 200 cycles at temperatures ranging from -55°C to 80°C.
75710-5008
BOARD CONNECTOR; Reliability: COMMERCIAL; No. of Connectors: ONE; Body Depth: 1.37 inch; Mounting Style: RIGHT ANGLE; Contact Material: COPPER ALLOY;
75710-2006
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .917 inch;
75710-3006
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.073;
75710-3010
Molex 75710-3010 is a board connector with 220 contacts in 11 rows, featuring a mating contact pitch of 0.073". It has a body width of 0.917" and termination contact finish of matte tin over nickel. Ideal for commercial applications requiring reliable right-angle mounting with press-fit termination.
75710-4106
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: 1.37 inch;
75710-1010
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Mounting Option-1: LOCKING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved