Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD STACKING CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 350VAC; No. of Connectors: ONE; Rated Current - Signal: .3 A; Contact Pattern: RECTANGULAR;
Median Price
$0.790
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.289
Master Electronics
$1.540
$1.360
$1.170
Chip1Stop
$1.200
Farnell
$0.380
TestEquity
$0.310
Vyrian
IBS Electronics
TME
$0.343
Digiode
Lantek
Kepictronics
Metaverse IC Inc.
Corphita
GreenTree Electronics
Headers & Edge Type Connectors 5033045040 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
Contact Pattern:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
5033045040 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Continental Device India
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Lite-on Semiconductor
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Eic Semiconductor
B13B-PH-K-S(LF)(SN)
J S T Mfg
B13B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 1.098" length, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with 2A signal current, operating b/w -25°C to 85°C.
52271-1679
Molex
The Molex 52271-1679 is a FFC/FPC connector with 16 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 750VAC. Ideal for board mounting applications, it features a polyamide insulator material and operates b/w -40 to 85°C temperature range.
M50-3600542R
Harwin Plc
The Harwin PLC M50-3600542R is a 10-contact female board connector with a mating contact pitch of 0.05", ideal for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. With durability up to 300 cycles, this UL-rated connector is suitable for commercial use in various electronic devices.
DF3-4S-2C
Hirose Electric
DF3-4S-2C by Hirose Electric is a 4-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. It is used in cable mounting applications for signal currents up to 3A, featuring UL94V-0 flammability rating and POLYAMIDE insulator material.
2468
Keystone Electronics
PCB CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
S3B-XH-A(LF)(SN)
S3B-XH-A(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin copper finish. It has a terminal pitch of 2.5mm, UL 94V-0 flammability rating, and right-angle mounting style. Ideal for applications requiring secure board-to-board connections in electronic devices.
B3B-PH-SM4-TBT(LF)(SN)
B3B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, made of COPPER ALLOY. It features Tin (Sn) over Copper (Cu) termination and has a terminal pitch of 2mm. Ideal for surface mount applications in headers & edge type connectors.
BM02B-GHS-TBT(LF)(SN)
BM02B-GHS-TBT(LF)(SN) by J S T Mfg is a 5.75" BOARD CONNECTOR with 0.049" pitch, suitable for PCBs with POLYAMIDE insulator and PHOSPHOR BRONZE contacts. It offers 500VAC dielectric voltage, -25 to 85°C operating range, and UL94V-0 flammability rating. Ideal for applications requiring high insulation resistance and 1A signal current capacity.
90142-0010
The Molex 90142-0010 is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 1000000000 ohm. It has a body width of 0.304 inch and is commonly used in cable mounting applications.
22-05-3041
The Molex 22-05-3041 is a board connector with mating contact pitch of 0.1", body length of 0.4", and body width of 0.25". It features matte tin over nickel termination, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right angle mounting solution with rectangular contact pattern on PCBs.
53047-0610
The Molex 53047-0610 is a 6-contact, polarized housing board connector with a mating contact pitch of 0.049 inches. It has a body length of 0.364 inch and is made of polyamide. This connector is commonly used in commercial applications and can withstand temperatures ranging from -40 to 85°C.
22-23-2031
The Molex 22-23-2031 is a board connector with 3 male contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1G ohm, and body length of 0.294". It is used in commercial applications, with UL flammability rating of 94V-0 and termination via solder for reliability.
B8B-PH-K-S(LF)(SN)
B8B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male contact gender, RECTANGULAR PCB pattern, and POLYAMIDE66 insulator material.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
B4PS-VH(LF)(SN)
B4PS-VH(LF)(SN) by J S T Mfg is a 4-contact board connector with a mating contact pitch of 0.156 inches. It has a body length of 0.621 inch and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in applications requiring a right angle mounting style and solder termination type.
DF11-8DP-2DSA(01)
DF11-8DP-2DSA(01) by Hirose Electric is a 2-row, 8-contact board connector with gold over nickel termination. Featuring a mating contact pitch of 0.079", it offers high insulation resistance of 1Gohm and withstands up to 650VAC. Ideal for commercial applications, this connector has a temperature range from -30°C to 85°C and boasts durability of 50 cycles.
B4P-VH-FB-B(LF)(SN)
B4P-VH-FB-B(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.156" mating contact pitch, 0.698" body length, and 0.382" body width. It features tin (Sn) termination contact finish and glass-filled polybutylene terephthalate insulator material. Ideal for applications requiring a male straight mounting style connector with solder termination type.
B4B-PH-SM4-TBT(LF)(SN)
B4B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with Tin (Sn) finish. It has a terminal pitch of 2mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
746-014-520-606
Edac
Edac 746-014-520-606 is a 14-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric strength of 1500VAC and operates b/w -40 to +105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability rating.
SHR-02V-S-B
SHR-02V-S-B by J S T Mfg is a BOARD CONNECTOR with 2 FEMALE contacts. It has UL 94V-0 flammability rating, suitable for CABLE mounting with CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved