Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 502430-1430 is a male plug connector with 14 contacts, featuring a mating pitch of 0.016", body dimensions of 0.199" x 0.061" x 0.031", and GLASS FILLED LIQUID CRYSTAL POLYMER insulator. It is a board stacking connector suitable for surface mount termination in commercial applications.
Median Price
$0.481
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.323
1k+ parts
-
10k+ parts
DigiKey
$0.710
$0.509
$0.433
$0.371
Mouser Electronics
$0.510
$0.365
Newark
$0.823
$0.619
$0.541
Element14
$0.440
Chip1Stop
$0.283
PEI Genesis
Verical
Digiode
$0.326
TestEquity
$0.410
Nova Conductors
$0.412
Semtec, LLC
VNN
Vyrian
IBS Electronics
ACDS - Activité Composants Distribution Service
Semicontronic
$0.241
$0.235
$0.234
Corphita
$0.309
Argo Parts USA
$0.400
Kepictronics
Continental Prestige Electronics
$0.543
$0.475
Close contact pitch allows for high density connections, making this product suitable for applications requiring a compact design.
Optimal body length for efficient connectivity while minimizing space requirements in the overall system.
Slim body width enables easy integration into tight spaces, ideal for products with limited room for connectors.
Shallow body depth helps in maintaining a low profile for the connector, suitable for applications with height restrictions.
High-quality insulator material ensures reliable insulation and protection for the contacts, enhancing durability and performance.
Dual row configuration allows for increased connectivity options, making it versatile for various circuit designs.
Secure fitting nail mounting option ensures stable attachment to the PCB, minimizing the risk of disconnection or damage.
Optimal plating thickness provides good conductivity and corrosion resistance, ensuring long-term reliability of the connector.
Board stacking connector design enables vertical stacking of PCBs, allowing for efficient use of space in compact electronic devices.
Black color adds a sleek and professional look to the connector, suitable for applications where aesthetics are important.
Compliance with UL standards ensures safety and reliability, meeting industry requirements for quality and performance.
Sufficient number of contacts for a wide range of connectivity options, making this product versatile for different electronic applications.
Single connector simplifies installation and maintenance, reducing complexity and potential points of failure in the system.
Board mounting type offers easy integration onto the PCB, providing a secure and stable connection for reliable performance.
Standard terminal pitch for compatibility with common components and circuit designs, ensuring ease of use and versatility.
Rectangular contact pattern allows for efficient and secure connection, minimizing the risk of misalignment or poor contact.
Surface mount termination provides easy and secure attachment to the PCB, simplifying assembly and ensuring a stable connection.
Male contacts are commonly used in connectors, offering a robust and reliable connection for various electronic applications.
Plug-style body or shell design enables easy insertion and removal, making it convenient for maintenance and upgrades.
Straight mounting style ensures a simple and straightforward installation process, reducing assembly time and effort.
Locking mounting option adds an extra layer of security, preventing accidental disconnection and ensuring stable connectivity.
Rectangular contact pattern offers a reliable and secure connection, ideal for applications requiring stable signal transmission.
Commercial-grade reliability ensures consistent performance in a variety of environments, making this product a dependable choice for diverse applications.
Headers & Edge Type Connectors 502430-1430 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
502430-1430 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Mult Devs Plating Process 23/Feb/2023
PCN Assembly/Origin - 5024301430 Location 17/Dec/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Onsemi
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
640456-6
TE Connectivity
TE Connectivity 640456-6 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring TIN finish, it has 6 contacts and operates b/w -55 to 105°C. With a rectangular contact pattern, it offers a rated current of 5A and solder termination for male connectors.
N2520-6002-RB
3m Electronic Products Division
N2520-6002-RB by 3M is a 20-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin finish, it offers high insulation resistance of 1G ohm and can withstand up to 1400VAC. With a temperature range of -55 to 105°C, this male connector is ideal for PCB mounting in various electronic devices.
(D)B3B-EH-A(LF)(SN)(P)
J S T Mfg
(D)B3B-EH-A(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 800VAC voltage withstand, and 3A signal current rating. Ideal for PCB applications requiring POLARIZED KEY, WHITE insulator color, and STRAIGHT mounting style.
341-054-500-101
Edac
Edac 341-054-500-101 is a CARD EDGE CONNECTOR with 54 contacts at 0.1" pitch. It has an insulation resistance of 5Gohm, rated for 3A signal current, and operates b/w -40 to 105°C. Ideal for wire wrap termination in applications requiring high contact reliability and low withdrawal force.
851-
Mill-max Mfg
851- by Mill-max Mfg is a BOARD CONNECTOR with 1.27mm Terminal Pitch, SOLDER Termination Type, and MALE Contact Gender. It is used in Headers & Edge Type Connectors for STRAIGHT Mounting on PCBs.
09-65-2028
Molex
Molex 09-65-2028 is a board connector with 0.155" mating contact pitch, 1000000000 ohm insulation resistance, and 1500VAC dielectric voltage withstand. Ideal for commercial applications, this male connector features a straight mounting style and solder termination type for durability in temperatures ranging from -40 to 105 °C.
XHP-2-BK
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Manufacturer Series: XH; Mating Contact Finish: NOT SPECIFIED;
70543-0001
Molex 70543-0001 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and phosphor bronze contacts. With UL certification and 3A signal rating, it offers durability of 50 cycles at temperatures ranging from -40 to 105°C.
831-43-030-30-002000
831-43-030-30-002000 by Mill-max Mfg is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 2mm and is for SURFACE MOUNT applications. This FEMALE SOCKET connector mounts STRAIGHT on the board.
DM3AT-SF-PEJM5(26)
Hirose Electric
DM3AT-SF-PEJM5(26) by Hirose Electric is a PCB connector with 0.043" pitch, 500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a male contact finish of AU, operates b/w -25 to 85 °C, and has a durability of 10000 cycles.
B04B-PASK(LF)(SN)
B04B-PASK(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" mating contact pitch and 800VAC dielectric voltage. Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, it operates b/w -25 to 85 °C and has UL 94V-0 flammability rating. Ideal for PCB applications requiring high insulation resistance and rated current of 3A.
DF11-14DP-2DSA(01)
DF11-14DP-2DSA(01) by Hirose Electric is a 14-contact board connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 85°C and is suitable for commercial applications.
FH12A-40S-0.5SH(55)
FH12A-40S-0.5SH(55) by Hirose Electric is a FFC/FPC connector with 40 contacts, gold termination finish, and 500M ohm insulation resistance. It operates b/w -40 to 85°C, has a mating pitch of 0.02", and is used in board mounting applications requiring high durability and reliability.
FTSH-105-01-F-DV-K-P-FR
Samtec
The Samtec FTSH-105-01-F-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish and nickel barrier. It has a terminal pitch of 1.27mm and UL flammability rating of 94V-0. Ideal for surface mount applications in electronics requiring high-density connections.
503480-0600
The Molex 503480-0600 is a FFC/FPC connector with a mating contact pitch of 0.020 inch and insulation resistance of 50M ohm. It is commonly used in board mounting applications, has a max operating temperature of 85°C, and offers a durability of 10 cycles.
B4B-PH-K-S(LF)(SN)(PP)
B4B-PH-K-S(LF)(SN)(PP) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, Tin (Sn) finish, and 2mm terminal pitch. It is used in applications requiring headers & edge type connectors for board mounting with solder termination.
FTSH-105-01-L-DV-K-A-P-FR
Samtec's FTSH-105-01-L-DV-K-A-P-FR is a 10-contact, 2-row male board connector with tin finish. Featuring a 1.27mm pitch, it is surface mountable and UL94V-0 rated. Ideal for applications requiring straight mounting of edge type connectors.
MEM2067-02-180-00-A
Global Connector Technology
MEM2067-02-180-00-A by Global Connector Technology is a PCB connector with 8 contacts, mating pitch of 0.04", and termination finish of TIN OVER NICKEL. It features liquid crystal polymer insulator material and is UL certified for use in various applications requiring a right angle mounting style on the board.
70543-0002
Molex 70543-0002 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin finish, it offers high durability with 50 cycles and operates b/w -40 to 105°C temperature range. Ideal for commercial use, this connector has a polarization key and UL94V-0 flammability rating.
851-43-030-30-001000
The Mill-max Mfg 851-43-030-30-001000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. The connector features FEMALE contact gender and SOCKET body style, suitable for STRAIGHT mounting on boards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
502443-0470
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; JESD-609 Code: e3; Contact Style: BELLOWED TYPE;
502494-0470
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn);
502439-0700
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
5024262010
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; No. of Connectors: ONE;
5024940670
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
5024390600
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: CLIK-MATE, POLARIZED; Contact Material: NOT SPECIFIED; No. of Rows Loaded: 1;
5024390800
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; No. of Rows Loaded: 1; IEC Conformity: NO;
502426-7030
Deutsch
Deutsch 502426-7030 is a board connector with 70 contacts, gold over nickel termination, and glass-filled liquid crystal polymer insulator. It has a mating contact pitch of 0.016", suitable for commercial applications at temperatures ranging from -25 to 85°C. The connector features a rectangular PCB contact pattern and is designed for surface mount termination.
5024267030
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; DIN Conformance: NO; Filter Feature: NO;
502443-0870
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Pattern: RECTANGULAR;
502430-3230
BOARD STACKING CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Style: STRAIGHT; PCB Contact Pattern: RECTANGULAR;
502430-5030
BOARD STACKING CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2; Termination Type: SURFACE MOUNT;
502426-6010
502426-8030
Molex 502426-8030 is a board connector with 80 contacts, gold over nickel finish, and glass-filled liquid crystal polymer insulator. It has a mating contact pitch of 0.016", operates b/w -40 to 85°C, and offers high insulation resistance of 100M ohm. Ideal for commercial applications requiring durable connectors with surface mount termination.
5024266012
BOARD STACKING CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
5024390400
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 4; Polarization Key: POLARIZED KEY;
5024262012
BOARD STACKING CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
502430-6410
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE;
502443-0560
BOARD CONNECTOR; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
502430-1489
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE; Mating Contact Finish: AU ON NI;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved