Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 5024262010 is a 20-contact board connector with 0.015" pitch, suitable for PCBs. Features include 100000000 ohm insulation resistance, 350VAC dielectric voltage, and gold termination finish. Ideal for commercial applications requiring a durable, polarized housing with surface mount termination.
Median Price
$0.889
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Velocity Electronics
Vyrian
VNN
Digiode
Euro-Tech
Semi Source
Continental Prestige Electronics
$0.871
Argo Parts USA
Netroflash
$0.844
$0.826
AZTECH Wire
$5.092
Kepictronics
Assy Fe
Glotronic Ltd.
Perfect Parts
Corphita
The close proximity of the mating contacts allows for efficient signal transmission and high data transfer rates.
High insulation resistance ensures reliable and stable signal transmission, minimizing the risk of signal interference or loss.
The high dielectric strength allows the connector to withstand high voltage levels, ensuring safety and durability in operation.
Gold contact finish provides excellent conductivity and corrosion resistance, resulting in a longer lifespan and improved signal quality.
The insulator material offers high mechanical strength and heat resistance, enhancing the durability and reliability of the connector.
A high rated current allows the connector to handle higher signal currents without overheating or affecting performance.
Low contact resistance ensures minimal signal loss and improved conductivity, maintaining signal integrity and quality.
Headers & Edge Type Connectors 5024262010 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
5024262010 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Obsolescence/ EOL - Multiple Devices 18/Sep/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1552200168
Molex
WIRE AND CABLE;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
87832-1420
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
Secos
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
22-01-3077
The Molex 22-01-3077 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 700VAC dielectric voltage and -40 to 105°C operating temperature range, it offers reliable signal current of 4A. With POLYAMIDE insulation material and UL94V-0 flammability rating, this connector is ideal for commercial applications requiring durable and polarized female contacts.
22-23-2021
Molex 22-23-2021 header connector features 0.1" mating contact pitch, 0.194" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with UL and CSA standards compliance.
796136-1
Tyco Electronics Amp
PCB CONNECTOR; Option: GENERAL PURPOSE; Manufacturer Series: 796136; JESD-609 Code: e3; Mating Contact Finish: TIN; DIN Conformance: NO;
SIM8066-6-1-14-01-A
Global Connector Technology
SIM8066-6-1-14-01-A by Global Connector Technology is a PCB connector with 2 rows, 6 contacts, and insulation resistance of 1000000000 ohm. It has a dielectric voltage of 500VAC, operates b/w -40 to 85 °C, and is ideal for applications requiring a durable female connector with right-angle mounting.
SHR-04V-S-B
J S T Mfg
SHR-04V-S-B by J S T Mfg is a 4-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts, CABLE mounting, and CRIMP termination. Ideal for applications requiring secure cable connections in electronic devices.
2-1761603-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; UL Flammability Code: 94V-0; No. of Rows Loaded: 2;
475532001
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
ZHR-5
ZHR-5 by J S T Mfg is a BOARD CONNECTOR with 5 contacts, UL 94V-0 rated. It features FEMALE contacts for CABLE mounting with CRIMP termination. Ideal for applications requiring reliable edge type connectors in RECEPTACLE style.
472192001
Molex 472192001 is a PCB connector with 0.043" mating contact pitch, 0.535" body length, and 100000000 ohm insulation resistance. It is used in applications requiring a durable, right angle mounting receptacle for commercial reliability.
S2B-EH(LF)(SN)
S2B-EH(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.098" pitch, 0.295" body length, and 0.165" body width. It features bright tin finish, POLYAMIDE66 insulator, and solder termination for right-angle mounting applications. Ideal for electronics requiring compact connectors with high reliability in tight spaces.
71600-006LF
Amphenol Communications Solutions
71600-006LF by Amphenol is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. It features 50B ohm insulation resistance, 1414VAC dielectric voltage, and operates b/w -65 to 105°C. Ideal for commercial applications requiring a durable female receptacle with locking mounting option.
SM04B-GHS-TB(LF)(SN)
SM04B-GHS-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.049" pitch, POLYAMIDE insulator, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contacts, right-angle mounting, and surface mount termination.
09032966825
Harting Electronics & Kg
09032966825 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for board connections in commercial applications due to its durability, UL Flammability Code rating of 94V-0, and rated current signal capacity of 2A.
50-57-9408
The Molex 50-57-9408 is a board connector with a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and rated current of 3A. It is used in applications requiring a female connector with crimp termination, suitable for commercial reliability standards.
SSW-110-01-G-D
Samtec
SSW-110-01-G-D by Samtec is a 2-row, 20-contact board connector with a mating contact pitch of 0.1". It features gold over nickel termination finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable socket connections on PCBs with a rectangular contact pattern.
10-11-2023
Molex 10-11-2023 is a board connector with 0.1" mating contact pitch, POLYAMIDE insulator, and 1000VAC dielectric voltage. It's ideal for commercial applications requiring a durable, polarized housing with 2 contacts and crimp termination for 22-30 AWG wires.
TCMD-12-01
Samtec's TCMD-12-01 is a 24-contact, 2-row board connector with terminal pitch of 2mm. It supports IDC/solder termination and male contact gender. Ideal for applications requiring straight mounting on both boards and cables.
5650473-5
TE Connectivity 5650473-5 is a 3-row BOARD EURO CONNECTOR with 96 contacts. Featuring GLASS FILLED POLYMER insulator, it has a mating contact pitch of 0.1 inch and operates b/w -55 to 105 °C. Ideal for commercial applications requiring high insulation resistance and rated current of 1.5A.
DF19G-20S-1C(05)
Hirose Electric
DF19G-20S-1C(05) by Hirose Electric is a 20-contact male plug board connector with crimp termination. It has UL 94V-0 flammability rating and is suitable for cable mounting applications. Ideal for various electronic devices requiring reliable edge type connectors.
VHR-9N
VHR-9N by J S T Mfg is a 9-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, RIGHT ANGLE mounting style, and CRIMP termination type. Ideal for CABLE mounting applications in Headers & Edge Type Connectors category.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
502443-0470
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; JESD-609 Code: e3; Contact Style: BELLOWED TYPE;
502494-0470
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn);
502439-0700
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
5024940670
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
5024390600
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: CLIK-MATE, POLARIZED; Contact Material: NOT SPECIFIED; No. of Rows Loaded: 1;
5024390800
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; No. of Rows Loaded: 1; IEC Conformity: NO;
502426-7030
Deutsch
Deutsch 502426-7030 is a board connector with 70 contacts, gold over nickel termination, and glass-filled liquid crystal polymer insulator. It has a mating contact pitch of 0.016", suitable for commercial applications at temperatures ranging from -25 to 85°C. The connector features a rectangular PCB contact pattern and is designed for surface mount termination.
5024267030
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; DIN Conformance: NO; Filter Feature: NO;
502430-1430
BOARD STACKING CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR; No. of PCB Rows: 2;
502443-0870
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Pattern: RECTANGULAR;
502430-3230
BOARD STACKING CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Style: STRAIGHT; PCB Contact Pattern: RECTANGULAR;
502430-5030
BOARD STACKING CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2; Termination Type: SURFACE MOUNT;
502426-6010
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; No. of Connectors: ONE;
502426-8030
Molex 502426-8030 is a board connector with 80 contacts, gold over nickel finish, and glass-filled liquid crystal polymer insulator. It has a mating contact pitch of 0.016", operates b/w -40 to 85°C, and offers high insulation resistance of 100M ohm. Ideal for commercial applications requiring durable connectors with surface mount termination.
5024266012
BOARD STACKING CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
5024390400
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 4; Polarization Key: POLARIZED KEY;
5024262012
BOARD STACKING CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
502430-6410
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE;
502443-0560
BOARD CONNECTOR; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
502426-2610
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved