Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Median Price
$0.542
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Element14
1+ parts
$0.579
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.689
$0.498
$0.433
$0.337
Mouser Electronics
$0.700
$0.503
$0.449
$0.367
Newark
$0.830
$0.629
$0.611
DigiKey
$0.377
Verical
$0.345
Chip1Stop
$0.505
NEP Electronics
Farnell
$0.378
Nova Conductors
$0.458
Digiode
$0.550
Maritex
$0.603
$0.430
$0.384
$0.292
Component Electronics Inc.
$0.650
$0.490
Vyrian
IBS Electronics
$0.417
TME
$0.615
VNN
Inventory MP
Bristol Electronics
Argo Parts USA
$0.444
Netroflash
$0.435
$0.426
Corphita
$0.521
Continental Prestige Electronics
$0.825
$0.617
Metaverse IC Inc.
Kepictronics
Perfect Parts
Assy Fe
Authorized Procurement Solutions
GreenTree Electronics
Headers & Edge Type Connectors 501940-0507 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
501940-0507 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
EU2B-YS303C
Idec
ROTARY SWITCH;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Fairchild Semiconductor
Yangzhou Yangjie Electronics
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
853-93-010-20-001000
Mill-max Mfg
Mill-max Mfg 853-93-010-20-001000 is a 10-contact, dual-row board connector with tin/lead finish. Featuring beryllium copper contacts, it's ideal for right-angle mounting on boards. This socket connector has a pitch of 1.27mm and is suitable for various electronic applications.
851-43-025-10-011000
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
FTSH-107-01-L-DV-K-P-TR
Samtec
Samtec FTSH-107-01-L-DV-K-P-TR is a 14-contact board connector with 0.05" pitch, ideal for commercial applications. Features include liquid crystal polymer insulator, phosphor bronze contact material, and gold mating finish over nickel. With a temperature range of -55 to 125°C, it offers reliable signal current up to 3.3A.
DT06-6S-EP06
TE Connectivity
TE Connectivity's DT06-6S-EP06 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this polarized connector has a total of 6 contacts and UL certification.
801-43-025-10-001000
801-43-025-10-001000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, MATTE TIN finish. It has a terminal pitch of 2.54mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors on PCBs.
53398-0771
Molex
The Molex 53398-0771 header connector features a mating contact pitch of 0.049", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting with solder holding posts, this connector is designed for applications requiring a durable, polarized male connector with a total of 7 contacts.
DF3A-2P-2DSA
Hirose Electric
DF3A-2P-2DSA by Hirose Electric is a board connector with 0.079" mating contact pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a solder termination type and operates b/w -30 to 85 °C temperatures.
XHP-4-BK
J S T Mfg
XHP-4-BK by J S T Mfg is a 4-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
SSW-106-01-T-D
Samtec SSW-106-01-T-D is a 2-row, 12-contact board connector with a mating contact pitch of 0.1". It features liquid crystal polymer insulator material and matte tin finish over nickel. Ideal for PCB applications requiring reliable female socket connectors with solder termination in commercial settings.
43025-2000
The Molex 43025-2000 is a board connector with 20 contacts arranged in S0P20 configuration. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and rated current of 2.5A. Ideal for commercial applications, it has a temperature range from -40 to 105°C and UL flammability rating of 94V-0.
851-
851- by Mill-max Mfg is a BOARD CONNECTOR with 1.27mm Terminal Pitch, SOLDER Termination Type, and MALE Contact Gender. It is used in Headers & Edge Type Connectors for STRAIGHT Mounting on PCBs.
ISDF-10-S-M
ISDF-10-S-M by Samtec is a 10-contact board connector with gold over nickel finish. It features a mating contact pitch of 0.05", liquid crystal polymer insulator, and beryllium copper contacts. Ideal for commercial applications requiring a reliable female cable mount connector with rectangular contact pattern.
GHR-05V-S
GHR-05V-S by J S T Mfg is a 5-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure electrical connections in compact spaces.
851-47-053-10-002000
BOARD CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD;
640456-2
TE Connectivity 640456-2 is a BOARD CONNECTOR with 0.1" pitch, suitable for commercial applications. Features BRASS contacts, TIN finish, and GLASS FILLED POLYESTER insulator material. Rated for 5A signal current with operating temperatures from -55 to 105°C.
TFM-110-01-L-D-RE1-WT
Samtec TFM-110-01-L-D-RE1-WT is a 20-contact board connector with 0.05" pitch, suitable for PCBs with rectangular contact pattern. It features tin termination finish, phosphor bronze contacts, and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable right-angle mounting with polarized housing and UL flammability rating of 94V-0.
PHR-10
PHR-10 by J S T Mfg is a 10-contact board connector with 0.079" pitch, suitable for cables with 24-30 AWG wires. Featuring POLYAMIDE66 insulation and 800VAC dielectric voltage, it operates b/w -25 to 85°C. With UL94V-0 flammability rating, it offers high insulation resistance of 1 Gohm for various applications.
DF3-6S-2C
DF3-6S-2C by Hirose Electric is a 6-contact board connector with 0.079" pitch, suitable for cables with 22-28 AWG wire sizes. With a dielectric voltage of 650VAC and operating temperatures from -30 to 85°C, it's ideal for commercial applications requiring a reliable signal current of up to 3A.
640456-6
TE Connectivity 640456-6 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring TIN finish, it has 6 contacts and operates b/w -55 to 105°C. With a rectangular contact pattern, it offers a rated current of 5A and solder termination for male connectors.
09-65-2028
Molex 09-65-2028 is a board connector with 0.155" mating contact pitch, 1000000000 ohm insulation resistance, and 1500VAC dielectric voltage withstand. Ideal for commercial applications, this male connector features a straight mounting style and solder termination type for durability in temperatures ranging from -40 to 105 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
501939-0400
The Molex 501939-0400 is a board connector with 4 contacts, 0.039" pitch, and 0.177" body width. It features glass-filled polyamide insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring a reliable female receptacle with crimp termination on cable mounting.
501951-4000
Molex 501951-4000 is a FFC/FPC connector with 40 contacts, 0.020" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings with -25 to 85°C operating temperature range. Features TIN BISMUTH over NICKEL finish for durability and UL flammability rating of 94V-0.
5019515010
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mixed Contacts: NO; Insulator Color: WHITE;
5019122590
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Mating Contact Pitch (inch): 0.012; Terminal Pitch (mm): .3;
5019515000
The Molex 5019515000 FFC/FPC connector has a mating contact pitch of 0.020", termination with Tin (Sn) - Nickel (Ni), and UL Flammability Code of 94V-0. With 50 contacts, it is used for surface mount applications in boards requiring a 0.5mm terminal pitch.
501953-0305
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
501951-4010
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 1; UL Flammability Code: 94V-0;
501953-0407
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Additional Features: PICO-CLASP;
5019314070
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 2; Termination Contact Finish: NOT APPLICABLE;
501940-0307
5019510650
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: TIN OVER NICKEL; Mating Contact Finish: NOT SPECIFIED; Total No. of Contacts: 6;
501940-0407
The Molex 501940-0407 is a board connector with a mating contact pitch of 0.039". It features a max operating temperature of 105°C and plating thickness of 40u, suitable for applications requiring durable male connectors with surface mount termination in electronic devices.
5019513010
Molex 5019513010 is a FFC/FPC connector with 30 contacts, 0.020" mating pitch, and 0.177" body width. It features GLASS FILLED LIQUID CRYSTAL POLYMER insulator material and UL 94V-0 flammability rating. Ideal for commercial applications requiring surface mount termination on PCBs with staggered contact pattern.
501912-5190
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Gold (Au); Termination Type: SURFACE MOUNT; Terminal Pitch (mm): .3;
5019400403
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
501951-2010
The Molex 501951-2010 FFC/FPC connector has a mating contact pitch of 0.020", UL flammability code of 94V-0, and insulator material made of glass filled liquid crystal polymer. With a total of 20 contacts, it is commonly used in commercial applications for surface mount termination on PCBs with a mounting style of straight and locking option.
5019512230
FFC/FPC CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
501931-2070
Molex 501931-2070 is a board connector with 20 contacts, 2 rows, and 1.25mm terminal pitch. It has a mating contact pitch of 0.049", insulation resistance of 100M ohm, and operates b/w -25°C to 85°C. Ideal for commercial applications requiring a reliable female receptacle with surface mount termination in natural color.
5019513000
Molex 5019513000 is a FFC/FPC connector with 30 contacts, 0.020" pitch, and 50000000 ohm insulation resistance. It is used in board mounting applications for signal currents up to 0.4A, featuring GLASS FILLED LIQUID CRYSTAL POLYMER insulator material and a durability of 20 cycles.
501940-0467
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SURFACE MOUNT; MIL Conformity: NO; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved