Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 501939-0400 is a board connector with 4 contacts, 0.039" pitch, and 0.177" body width. It features glass-filled polyamide insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring a reliable female receptacle with crimp termination on cable mounting.
Median Price
$0.311
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Verical
1+ parts
$0.223
100+ parts
-
1k+ parts
10k+ parts
$0.211
Arrow
$0.257
$0.236
Mouser Electronics
$0.490
$0.341
$0.251
$0.224
DigiKey
$0.351
$0.298
$0.280
Newark
$0.509
$0.372
$0.285
$0.264
Farnell
$0.524
$0.332
$0.240
Master Electronics
$0.239
$0.199
Chip1Stop
Element14
$0.232
$0.228
TTI
PSC Electronics
NEP Electronics
Digiode
$0.112
Maritex
$0.157
$0.071
$0.059
Nova Conductors
$0.231
Vyrian
VNN
Semicontronic
$0.087
$0.085
$0.084
Corphita
$0.106
Argo Parts USA
$0.217
Advanced Electronics
$0.235
Continental Prestige Electronics
$0.389
$0.174
Aztec Data Supply Inc.
$2.937
Perfect Parts
GreenTree Electronics
EMSNET (Excess)
Authorized Procurement Solutions
Netroflash
$0.226
$0.219
$0.214
Futuretech Components
Kepictronics
The tight contact pitch allows for secure connections and reliable signal transmission.
The slim body width enables the connector to fit into tight spaces, making it versatile for various applications.
The deep body depth provides ample space for the contacts, ensuring a stable and sturdy connection.
The use of glass-filled polyamide insulator material ensures durability and resistance to heat and electrical currents.
The board connector type allows for seamless integration onto printed circuit boards, ensuring efficient and effective connectivity.
The UL 94V-0 flammability code signifies high safety standards, making this connector suitable for a range of industries.
Meeting UL standards ensures quality and reliability, making this connector a trustworthy choice for various applications.
With four contacts, this connector offers multiple connection options, making it versatile and adaptable for different requirements.
The cable mounting type provides flexibility in installation, allowing for easy connections to various devices and systems.
The crimp termination type enables quick and easy installation, saving time and effort during assembly.
The female contact gender ensures compatibility with a wide range of male connectors, enhancing connectivity options.
The receptacle style offers a secure and protected housing for the contacts, ensuring stability and longevity.
The locking mounting option provides a secure and stable connection, preventing accidental disconnection.
The rectangular contact pattern allows for efficient use of space, maximizing the number of contacts in a compact design.
The commercial reliability ensures consistent performance and durability, making this connector a reliable choice for everyday use.
Headers & Edge Type Connectors 501939-0400 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
501939-0400 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Multiple Devices Additional Manufacturing Locatioin 10/Apr/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Uniohm
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1-1658621-1
TE Connectivity
TE Connectivity 1-1658621-1 is a dual-row board connector with 60 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it has a durable design for up to 75 cycles. Ideal for cable mounting applications, this connector operates b/w -65°C to 105°C temperature range.
B3B-XH-A(LF)(SN)
J S T Mfg
B3B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for applications requiring a male connector with 3A signal current, it features POLYAMIDE66 insulator material and operates b/w -25 to 85 °C.
B2P-VH-BK(LF)(SN)
B2P-VH-BK(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 10A signal current, and POLYAMIDE66 insulator. It has a dielectric voltage of 1500VAC and operates b/w -25 to 85°C. Ideal for PCB applications requiring a polarized housing with male SQ PIN-SKT contacts.
04T-JWPF-VSLE-S
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; IEC Conformity: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
2-640456-5
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Total No. of Contacts: 25; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
VHR-4N
VHR-4N by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC voltage withstand, and -25 to 85°C operating range. Ideal for cable mounting applications, it features POLYAMIDE insulation, UL94V-0 flammability rating, and FEMALE SQ PIN-SKT contacts.
HTSW-102-07-G-S
Samtec
Samtec's HTSW-102-07-G-S header connector features a 0.1" contact pitch, gold over nickel termination finish, and liquid crystal polymer insulator. With a temperature range of -55 to 125°C, it is ideal for board-to-board connections in commercial applications requiring high reliability.
BM03B-SRSS-TB(LF)(SN)(P)
BM03B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.039" pitch, 0.197" body length, and 100000000 ohm insulation resistance. It operates b/w -25 to 85 °C, has a dielectric voltage of 500VAC, and features POLARIZED HOUSING for applications requiring high signal current in PCB mounting setups.
5103309-1
TE Connectivity's 5103309-1 header connector features a mating contact pitch of 0.1", insulation resistance of 5G ohm, and operating temperatures from -65 to 105°C. Ideal for board connections in commercial applications requiring a male plug with solder termination and UL flammability rating of 94V-0.
2-640456-3
TE Connectivity 2-640456-3 is a 23-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it operates b/w -55 to 105°C and has UL94V-0 flammability rating. Ideal for PCBs, this male plug connector has a rectangular contact pattern and solder termination.
22-05-2051
Molex
Molex 22-05-2051 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring matte tin over nickel termination finish, it offers high durability with 25 cycles and reliable performance in commercial applications. The connector has a total of 5 contacts, solder termination type, and white polyamide insulator material.
PHR-3
PHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with POLYAMIDE66 insulator. It has 0.079" contact pitch, 800VAC dielectric voltage, and -25 to 85 °C operating temp range. Ideal for CABLE mounting, it features FEMALE contacts with 20 mohm resistance and 0.019" min insulation diameter.
1888247-1
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Mounting Style: RIGHT ANGLE; Terminal Pitch (mm): .8;
50-57-9009
The Molex 50-57-9009 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It has 9 female contacts for cable mounting with crimp termination. This UL-certified connector in black is ideal for commercial applications requiring reliable rectangular pin-skirt connections.
SLW12S-1C7LF
Amphenol Communications Solutions
SLW12S-1C7LF by Amphenol is a 12-contact FFC/FPC connector with tin finish, phosphor bronze contacts, and UL 94V-0 flammability rating. Ideal for board mounting applications, it features a 2mm terminal pitch and solder termination. Perfect for high-density electronic devices requiring reliable female connectors.
15910100
W+p Products
15910100 by W+p Products is a BOARD CONNECTOR with 10 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring a right angle mounting style and solder termination.
B4B-XH-AM
B4B-XH-AM by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and is UL 94V-0 rated. Ideal for board mounting applications requiring male connectors with solder termination.
B6B-PH-SM4-TB(LF)(SN)
B6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for PCB applications requiring POLYAMIDE66 insulator, COPPER ALLOY contacts, and TIN COPPER finish in a compact 0.628"x.197"x.26" body.
20021121-00010C4LF
Amphenol Communications Solutions' 20021121-00010C4LF is a board connector with a mating contact pitch of 0.05 inch and insulation resistance of 100MΩ. It is commonly used in commercial applications, offering durability with 100 cycles and a max operating temperature of 105°C.
43025-2400
The Molex 43025-2400 is a 24-contact board connector with 0.118" pitch, suitable for commercial applications. Featuring polyester insulation and UL94V-0 flammability rating, it operates b/w -40°C to 105°C. With a rated current of 2.5A, this female connector has a crimp termination type and requires min withdrawal force of 3.5584N.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
501951-4000
Molex 501951-4000 is a FFC/FPC connector with 40 contacts, 0.020" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings with -25 to 85°C operating temperature range. Features TIN BISMUTH over NICKEL finish for durability and UL flammability rating of 94V-0.
5019515010
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mixed Contacts: NO; Insulator Color: WHITE;
5019122590
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Mating Contact Pitch (inch): 0.012; Terminal Pitch (mm): .3;
5019515000
The Molex 5019515000 FFC/FPC connector has a mating contact pitch of 0.020", termination with Tin (Sn) - Nickel (Ni), and UL Flammability Code of 94V-0. With 50 contacts, it is used for surface mount applications in boards requiring a 0.5mm terminal pitch.
501953-0305
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
501951-4010
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 1; UL Flammability Code: 94V-0;
501953-0407
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Additional Features: PICO-CLASP;
5019314070
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 2; Termination Contact Finish: NOT APPLICABLE;
501940-0307
5019510650
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: TIN OVER NICKEL; Mating Contact Finish: NOT SPECIFIED; Total No. of Contacts: 6;
501940-0407
The Molex 501940-0407 is a board connector with a mating contact pitch of 0.039". It features a max operating temperature of 105°C and plating thickness of 40u, suitable for applications requiring durable male connectors with surface mount termination in electronic devices.
5019513010
Molex 5019513010 is a FFC/FPC connector with 30 contacts, 0.020" mating pitch, and 0.177" body width. It features GLASS FILLED LIQUID CRYSTAL POLYMER insulator material and UL 94V-0 flammability rating. Ideal for commercial applications requiring surface mount termination on PCBs with staggered contact pattern.
501912-5190
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Gold (Au); Termination Type: SURFACE MOUNT; Terminal Pitch (mm): .3;
501940-0507
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
5019400403
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
501951-2010
The Molex 501951-2010 FFC/FPC connector has a mating contact pitch of 0.020", UL flammability code of 94V-0, and insulator material made of glass filled liquid crystal polymer. With a total of 20 contacts, it is commonly used in commercial applications for surface mount termination on PCBs with a mounting style of straight and locking option.
5019512230
FFC/FPC CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
501931-2070
Molex 501931-2070 is a board connector with 20 contacts, 2 rows, and 1.25mm terminal pitch. It has a mating contact pitch of 0.049", insulation resistance of 100M ohm, and operates b/w -25°C to 85°C. Ideal for commercial applications requiring a reliable female receptacle with surface mount termination in natural color.
5019513000
Molex 5019513000 is a FFC/FPC connector with 30 contacts, 0.020" pitch, and 50000000 ohm insulation resistance. It is used in board mounting applications for signal currents up to 0.4A, featuring GLASS FILLED LIQUID CRYSTAL POLYMER insulator material and a durability of 20 cycles.
501939-0434
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; DIN Conformance: NO; Reference Standard: UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved