Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Terminal Pitch (mm): .4826; Total No. of Contacts: 19;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$8.446
$8.108
Corphita
Telecom & Datacom Connectors 47151-1111 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Insulation Resistance:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Plating Thickness (inch):
Rated Current - Signal:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
47151-1111 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Comchip Technology
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Daco Semiconductor
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
FDLL4148
Fairchild Semiconductor
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
6339082-3
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 64; Additional Features: 8 PORTS 8 POSITION EACH; Contact Material: PHOSPHOR BRONZE;
2013978-1
TE Connectivity's 2013978-1 is a Telecom & Datacom Connector with insulator material POLYETHYLENE. It has 19 contacts, rated current of 0.5A, and operates b/w -25 to 70°C. Ideal for board mounting with durability of 5000 cycles, it features a right angle mounting style and surface mount termination type.
74320-9004
Molex
Molex 74320-9004 is a telecom/datacom connector with 24 contacts, 0.075" pitch, and 1.45" body length. It has an insulation resistance of 1Gohm and operates b/w -20°C to 85°C. Ideal for commercial applications requiring reliable signal transmission on PCBs or panels.
10118194-0001LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 10118194-0001LF is a USB connector with 5 contacts, rated at 1.8A signal current and featuring a micro USB 2.0 contact style. It has a body length of 0.317", insulation resistance of 1000000000 ohm, and operates b/w -30 to 80 °C. Ideal for telecom & datacom applications, it offers durability up to 10000 cycles and features surface mount termination with a right-angle mounting style.
MUC-20PFFR-JS8A02
Amphenol
USB CONNECTOR;
57-10500-7
Cinch Connectivity Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Design: PREASSEM CONN; Insulation Resistance: 1000000000 ohm;
1300478009
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
USB-A-S-RA-TSMT-NP
Adam Tech
USB-A-S-RA-TSMT-NP by Adam Tech is a USB connector with 4 contacts, rated at 1.5A signal current. It features right-angle mounting style with a 0.571" body length and 0.28" width. Ideal for telecom & datacom applications, it has a dielectric voltage of 500VAC and operates b/w -20 to 60°C.
74990111211
Wuerth Elektronik & Kg
74990111211 by Wurth Elektronik is a Telecom & Datacom Connector with gold finish, polyethylene insulator, and nickel shell. Featuring 8 contacts in a polarized housing, it is ideal for board mounting applications with a temperature range of -40 to 85°C. This right-angle connector has staggered PCB contact pattern and solder termination for secure connections.
ZX62-AB-5PA(11)
Hirose Electric
ZX62-AB-5PA(11) by Hirose Electric is a USB connector with 5 contacts, gold termination finish, and liquid crystal polymer insulator. It has a dielectric voltage of 100VAC and operates b/w -30 to 85°C. Ideal for telecom/datacom applications due to its right-angle mounting style and surface mount termination type.
SS-641010-NF-K1
Bel Fuse
Bel Fuse SS-641010-NF-K1 is a 10-contact telecom & datacom connector with 0.605"x.505"x.815" dimensions, POLYETHYLENE insulator, and 30u NICKEL/TIN plating. It features FEMALE contacts, SOLDER termination, and UL 94V-0 flammability rating for board mounting applications in telecommunications and data communication systems.
74320-1004
Molex 74320-1004 is a Telecom & Datacom Connector with 0.075" pitch, 1.45" body length, and 1000000000 ohm insulation resistance. Ideal for board and panel mounting in telecom and datacom applications due to its gold termination finish, brass contact material, and UL reference standard compliance.
10103594-0001LF
The Amphenol Communications Solutions 10103594-0001LF USB connector features a body length of 0.317", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom applications, this right-angle receptacle with gold over nickel termination is durable for up to 10,000 cycles.
M90-7011645
Harwin Plc
The Harwin PLC M90-7011645 is a telecom/datacom connector with 16 contacts, gold-plated brass material, and 1A signal current rating. It features a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperatures from -40°C to 100°C. Ideal for board and panel mounting in commercial applications requiring reliable connectivity.
RJHSE-5M80
TELECOM AND DATACOM CONNECTOR;
HFJ11-1G01E-L12RL
Halo Electronics
HFJ11-1G01E-L12RL by Halo Electronics is a Telecom & Datacom Connector with 8 contacts, gold finish, and polarized housing. It has a 0.625" body length, 0.537" width, and 0.85" depth. Ideal for board and panel mounting in telecom applications due to its right angle mounting style and solder termination type.
5787617-1
TE Connectivity's 5787617-1 USB connector features POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom/datacom applications with a rated current of 1A, right angle mounting style, and durability of 1500 cycles.
1747981-1
TE Connectivity's 1747981-1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, COPPER ALLOY shell, and FEMALE contact gender. It has 19 contacts, rated for 0.5A signal current, and designed for surface mount termination in commercial applications.
3002
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Filter Feature: NO; DIN Conformance: NO; Additional Features: MAX CONTACTS (SERIES)=6; MIL Conformity: NO;
5569381-1
TE Connectivity 5569381-1 is a Telecom & Datacom Connector with EMI shielding, PCT Polyester insulator, and 8 contacts. It operates b/w -40 to 85°C, suitable for telecom applications requiring high insulation resistance and durability of 750 cycles. The right-angle mounting option with solder termination makes it ideal for board and panel installations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved