Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 200VAC; No. of Connectors: ONE; Polarization Key: POLARIZED HOUSING;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$7.956
$7.638
Corphita
Telecom & Datacom Connectors 46765-1311 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
46765-1311 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Meritek Electronics
EU2B-YS3203F
Idec
ROTARY SWITCH;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
Crimson Semiconductor
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
6-554720-3
TE Connectivity 6-554720-3 is a POLYCARBONATE TELECOM & DATACOM CONNECTOR with 0.46"x.334"x.885" dimensions and 50u plating thickness. It has 8 contacts, POLARIZED HOUSING, UL standard, and is used for cable mounting with wire termination in telecom applications.
7499010121A
Wuerth Elektronik & Kg
7499010121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, Polyethylene insulator, and Tin over Nickel termination. Ideal for board mounting in applications requiring right angle connectors with high UL flammability rating of 94V-0.
1734372-1
TE Connectivity's 1734372-1 USB Connector features a 0.472"x.177" body with POLYETHYLENE insulator, NICKEL finish, and UL 94V-0 flammability rating. With 4 contacts, it supports 1A signal current and offers durability of 1500 cycles. Ideal for telecom/datacom applications, this connector is polarized and has a locking mounting option for secure cable termination.
PCR-E20FS
Honda Tsushin Kogyo
PCR-E20FS by Honda Tsushin Kogyo is a 20-contact telecom/datacom connector with 0.05" pitch, suitable for commercial applications. Featuring a dielectric voltage of 500VAC and insulation resistance of 1Gohm, it has a nickel finish, solder termination, and can handle up to 1A signal current. Ideal for use in telecommunications and data communication systems.
ZX62R-AB-5P(30)
Hirose Electric
Hirose Electric's ZX62R-AB-5P(30) USB connector features gold termination, liquid crystal polymer insulator, and tin shell finish. With 5 contacts, it is ideal for telecom/datacom applications requiring a 94V-0 flammability code. The surface mount receptacle has a stainless steel shell and right-angle mounting style for board installation.
ARJM11D7-502-AB-EW2
Abracon
Abracon's ARJM11D7-502-AB-EW2 is a Telecom & Datacom Connector with 8 contacts, gold finish, and polarized housing. It has a body size of 0.626" x 0.543" x 0.839", operates b/w -40°C to 85°C, and features staggered PCB contact pattern. Ideal for board mounting in telecom and datacom applications.
48409-0003
Molex
Molex 48409-0003 USB connector with gold nickel finish, glass-filled polyethylene insulator, and solderable retention clips. Ideal for telecom & datacom applications due to its 2+2 rows loaded design, straight board mounting option, and durability of 5000 cycles. Rated for commercial reliability with a signal current of 1.8A and operating temperatures from -20°C to 85°C.
RJHSE-5080-08
Amphenol
RJHSE-5080-08 by Amphenol is a Telecom & Datacom Connector with 64 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC and insulation resistance of 500MΩ, suitable for board and panel mounting applications. The connector has a durable stainless steel shell, UL flammability rating of 94V-0, and operates b/w -55°C to +85°C temperatures.
472720001
The Molex 472720001 is a telecom & datacom connector with 0.7" body length, 100000000 ohm insulation resistance, and 707VAC dielectric voltage. It features a glass-filled liquid crystal polymer insulator and gold termination finish. Ideal for board mounting in applications requiring high durability and reliability such as telecommunications and data communications.
RJHSE-5380-A8
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
74990111211
74990111211 by Wurth Elektronik is a Telecom & Datacom Connector with gold finish, polyethylene insulator, and nickel shell. Featuring 8 contacts in a polarized housing, it is ideal for board mounting applications with a temperature range of -40 to 85°C. This right-angle connector has staggered PCB contact pattern and solder termination for secure connections.
USB3140-30-0170-1-C
Global Connector Technology
USB3140-30-0170-1-C by Global Connector Technology is a USB connector with 5 contacts, rated at 1A signal current. It features gold over nickel termination finish, liquid crystal polymer insulator, and steel shell material. Ideal for telecom/datacom applications, it has a durability of 10k cycles and operates b/w -30 to 85°C.
1734366-3
TE Connectivity USB Connector 1734366-3 with POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom/datacom applications, featuring SOLDERABLE RETENTION CLIPS for board mounting and rated at 1A signal current with FEMALE contact gender.
USBR-B-S-S-O-TH
Samtec
The Samtec USBR-B-S-S-O-TH is a USB connector with 4 contacts, right-angle mounting style, and high-temp thermoplastic insulator. It has a durability of 1500 cycles and operates b/w -50°C to 85°C. Ideal for telecom/datacom applications due to its nickel shell finish and solder termination type.
5555165-1
TE Connectivity 5555165-1 is a Telecom & Datacom Connector with 0.528" body length, 0.5" width, and 0.5" depth. It has an insulation resistance of 500M ohm and operates b/w -40 to 85°C. Ideal for telecom applications, it features a female contact gender, solder termination type, and UL94V-0 flammability rating.
SIM6050-8-0-30-00-A
CARD EDGE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: GOLD OVER NICKEL; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e4; Mating Contact Finish: AU ON NI;
54819-1572
54819-1572 by Molex is a USB connector with 5 contacts, 0.39" body length, and 0.156" body width. It features liquid crystal polymer insulation material and tin termination finish. Ideal for telecom/datacom applications, it offers 5000 cycle durability and operates b/w 0-50°C temperature range.
USB-A-S-RA-TSMT-NP
Adam Tech
USB-A-S-RA-TSMT-NP by Adam Tech is a USB connector with 4 contacts, rated at 1.5A signal current. It features right-angle mounting style with a 0.571" body length and 0.28" width. Ideal for telecom & datacom applications, it has a dielectric voltage of 500VAC and operates b/w -20 to 60°C.
J1B1211CCD
Wiznet
J1B1211CCD by Wiznet is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and NICKEL shell finish. It has a PCB contact row spacing of 2.54mm and operates b/w -40 to 85°C. Ideal for board and panel mounting in telecommunications and data communication applications.
P128
Lumberg Connect
P128 by Lumberg Connect is a Telecom & Datacom Connector with gold termination, brass contacts, and polycarbonate shell. It has 6 contacts, rated for 2A signal current, and operates b/w -40 to 125°C. Ideal for commercial telecom applications due to its durability of 2000 cycles and UL reference standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved