Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 43045-2018 is a rectangular power connector with 20 contacts, LCP insulator, and TIN over nickel finish. It operates b/w -40 to 105°C, has a dielectric voltage of 1000VAC, and insulation resistance of 1Gohm. Ideal for board mounting in commercial applications due to its durability and UL certification.
Median Price
$3.846
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$5.900
100+ parts
$3.980
1k+ parts
$3.110
10k+ parts
$2.920
Mouser Electronics
$6.430
$4.420
$3.750
-
Newark
$6.770
$4.880
$4.260
Element14
$8.240
$6.650
$6.220
Farnell
$3.813
Powell Electronics
$3.880
$3.520
Verical
$3.080
TTI
$3.210
TTI Europe
$2.781
$2.466
Master Electronics
$3.530
DigiKey
$2.950
Interstate Connecting
$3.433
Nova Conductors
$3.700
DF Sales Co.
$4.057
TestEquity
$4.190
Digiode
$5.396
Rapid Electronics
$3,540.942
IBS Electronics
$3.850
$3.050
VNN
Vyrian
Martec Srl
ComSIT Distribution GmbH
Prism Electronics
Semicontronic
$2.360
$2.301
$2.289
Andel Nordic
$2.751
$2.641
Argo Parts USA
Netroflash
Continental Prestige Electronics
$3.720
Corphita
$5.112
Advanced Electronics
$5.992
$5.692
Aztec Data Supply Inc.
$9.354
Perfect Parts
EMSNET (Excess)
Authorized Procurement Solutions
High insulation resistance ensures reliable and safe operation, making this connector a trustworthy choice for power applications.
With a compact body width, this connector is suitable for applications with limited space constraints.
The high dielectric voltage rating ensures excellent electrical performance, making this connector suitable for high voltage applications.
The TIN OVER NICKEL finish provides corrosion resistance and durability, ensuring long-term reliability in various environments.
The slim body depth allows for easy installation in tight spaces, making this connector versatile for a range of applications.
The LIQUID CRYSTAL POLYMER insulator material offers high temperature resistance and excellent mechanical properties, making this connector ideal for demanding conditions.
With two rows loaded, this connector can accommodate multiple contacts for increased connectivity options.
The high maximum operating temperature ensures reliable performance in elevated temperature environments.
The low minimum operating temperature allows for operation in cold conditions, making this connector versatile for various temperature environments.
The RECTANGULAR POWER CONNECTOR type offers a secure and reliable connection for power transmission applications.
The UL 94V-0 flammability rating ensures high fire safety standards, making this connector a secure choice for applications where fire safety is critical.
The black insulator color provides a sleek and professional appearance, making this connector visually appealing for various applications.
Compliance with UL standards ensures quality and reliability, making this connector a trusted choice for power connections.
With 20 contacts, this connector can accommodate multiple connections, providing versatility for various applications.
Featuring one connector, this product is suitable for single connection applications where simplicity is key.
The S0P20 contact arrangement offers specific contact configurations for optimized connectivity, making this connector suitable for custom applications.
With a durability rating of 30 cycles, this connector can withstand multiple connection and disconnection cycles, ensuring long-term reliability.
The BOARD mounting type allows for secure installation on a board, providing stable and reliable connections.
The GLASS FILLED LIQUID CRYSTAL POLYMER shell material enhances strength and durability, making this connector suitable for rugged environments.
The precise terminal pitch allows for accurate connections, ensuring consistent performance in various applications.
The SURFACE MOUNT termination type offers easy installation and reliable connections, making this connector user-friendly for assembly.
The male contact gender provides compatibility with female connectors, allowing for versatile interconnection options.
The low contact resistance ensures efficient power transmission and minimal energy loss, making this connector ideal for high-performance applications.
The RECEPTACLE body style offers a secure enclosure for contacts, protecting them from damage and ensuring reliable connections.
The STRAIGHT mounting style allows for straightforward installation, providing ease of use and convenience in various applications.
The SQ PIN-SKT contact style offers precise and secure connections, ensuring stable and reliable performance.
The specified maximum insertion force ensures secure connection and easy assembly, making this connector user-friendly for installation.
The LOCKING mounting option offers additional security for the connector, preventing unwanted disconnections and ensuring stable connections.
A commercial reliability rating ensures consistent performance and quality, making this connector a dependable choice for commercial applications.
Power Connectors 43045-2018 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
43045-2018 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices 13/Apr/2015
PCN Assembly/Origin - Mult Devs Cancel Supplier Change 28/Mar/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Daco Semiconductor
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
43045-1400
Molex
The Molex 43045-1400 is a rectangular power connector with a mating contact pitch of 0.118 inch and a body length of 0.97 inch. It has an insulation resistance of 1,000,000,000 ohm and is commonly used in board mounting applications for power connections.
43045-2400
The Molex 43045-2400 is a rectangular power connector with 24 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.
2174661033
RECTANGULAR POWER CONNECTOR;
03-06-1023
Molex 03-06-1023 is a rectangular power connector with POLYAMIDE insulator. It has 0.34" x 0.194" x 0.812" dimensions, operating from -40 to 105°C. With 2 contacts, it's ideal for cable mounting in commercial applications requiring reliable male/female crimp termination.
43879-0032
Molex 43879-0032 is a rectangular power connector with 24 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.
IPBT-105-H2-T-D-GP
Samtec
The Samtec IPBT-105-H2-T-D-GP is a rectangular power connector with liquid crystal polymer insulator. It has 10 contacts, matte tin over nickel finish, and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings.
39-29-6048
Molex 39-29-6048 is a rectangular power connector with 4 contacts, made of brass and polyamide66 insulator. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105 °C. Ideal for board mounting applications requiring durability, reliability, and high insulation resistance.
43045-1218
The Molex 43045-1218 is a rectangular power connector with 12 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 1000VAC. With a body width of 0.345" and termination in tin finish, it's ideal for board mounting applications requiring durability over 30 cycles.
15-24-4449
The Molex 15-24-4449 is a rectangular power connector with 4 contacts, featuring matte tin finish and polyamide66 insulator. It has a dielectric voltage of 1500VAC, operating temperature range from -40 to 105°C, and durability of 50 cycles. Ideal for board mounting applications in commercial settings.
5-5223955-2
TE Connectivity
TE Connectivity 5-5223955-2 is a rectangular power connector with 3 contacts, rated at 250V and 16A. It features polyethylene insulator, polyester shell material, and press-fit termination. Ideal for board mounting applications in commercial settings with operating temperatures from -55 to 125°C.
39-29-1068
The Molex 39-29-1068 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. It has a matte tin finish, brass contact material, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
1-480707-0
TE Connectivity's 1-480707-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator material. Featuring 9 contacts, it has a durability of 50 cycles and operates b/w -55 to 105 °C. Ideal for commercial applications, this connector offers crimp termination and panel mounting options.
2002411112
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
39-28-1203
Molex 39-28-1203 is a rectangular power connector with 20 contacts, rated at 13A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with polarization key and UL94V-2 flammability rating.
172310-1202
Molex 172310-1202 is a rectangular power connector with TIN over Nickel finish. Made of Liquid Crystal Polymer, it has 2 contacts and UL94V-0 flammability rating. Ideal for board mounting applications requiring male solder termination.
1-770166-0
TE Connectivity's 1-770166-0 Power Connector features a rated voltage of 600V, insulation resistance of 100M ohm, and a signal current rating of 9.5A. With board mounting options and durable construction, it is ideal for commercial applications requiring reliable power connections.
43650-0327
The Molex 43650-0327 is a rectangular power connector with 3 contacts, rated at 8.5A signal current. Featuring LCP insulator material, it has a mating contact pitch of 0.118" and dielectric voltage of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
178305-2
TE Connectivity's 178305-2 is a rectangular power connector with 10 contacts, rated at 15A. It features a body length of 1.151", insulation resistance of 100MΩ, and operates b/w -55°C to 105°C. Ideal for board mounting applications requiring durable connectors with solder termination.
87427-0402
The Molex 87427-0402 is a rectangular power connector with 4 contacts, TIN over nickel finish, and polyamide insulator. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable male connectors with right-angle mounting style.
39-31-0020
Molex 39-31-0020 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring POLYAMIDE66 insulator material, it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and UL94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43045-0612
The Molex 43045-0612 is a rectangular power connector with 6 contacts, rated for 5A signal current. Featuring bright tin over nickel termination finish, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications, this durable connector with LCP insulator is UL94V-0 compliant.
43045-0400
The Molex 43045-0400 is a rectangular power connector with 4 contacts, featuring bright tin termination finish and glass-filled liquid crystal polymer insulator. It has a temperature range of -40 to 105°C, UL94V-0 flammability rating, and male contact gender. Ideal for board mounting applications requiring durability and reliability in commercial settings.
43045-0600
The Molex 43045-0600 is a rectangular power connector with 6 contacts, featuring bright tin over nickel termination finish. It has a body length of 0.518", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
43045-0412
The Molex 43045-0412 is a rectangular power connector with 4 contacts, featuring tin termination finish and brass contact material. With insulation resistance of 1G ohm, it operates b/w -40 to 105°C. Ideal for board mounting applications, this connector has a durability of 30 cycles and meets CSA, TUV, UL standards.
43045-0800
Molex 43045-0800 is a rectangular power connector with 8 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with bright tin finish and LCP insulator material.
43045-0812
The Molex 43045-0812 is a rectangular power connector with 8 contacts, featuring bright tin over nickel termination finish. With a mating contact pitch of 0.118", it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings, this connector has a durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
43045-1012
The Molex 43045-1012 is a rectangular power connector with 10 contacts, rated for 5A signal current. It features LCP insulator material, brass contact material, and tin finish. Ideal for board mounting applications in commercial settings with operating temperatures from -40 to 105°C.
43045-0418
Molex 43045-0418 is a rectangular power connector with 4 contacts, LCP insulator, and brass contact material. It has a dielectric voltage of 1000VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability up to 30 cycles.
43045-0212
The Molex 43045-0212 is a rectangular power connector with 2 rows, rated at 5A signal current. Featuring liquid crystal polymer insulator and bright tin over nickel finish, it offers high durability with 30 cycles. Ideal for board mounting applications in commercial settings, this connector has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C.
43045-0200
Molex 43045-0200 is a rectangular power connector with LCP insulator, brass contacts, and bright tin finish. It has 2 rows, rated for 5A signal current, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
43045-1000
The Molex 43045-1000 is a rectangular power connector with 10 contacts, featuring bright tin termination finish and LCP insulator material. It has a mating contact pitch of 0.118", withstands up to 1500VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
43045-0414
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
43045-1018
Molex 43045-1018 is a rectangular power connector with 10 contacts, made of brass and LCP insulator. It has an insulation resistance of 1Gohm, withstands up to 1000VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
43045-1212
Molex 43045-1212 is a rectangular power connector with 12 contacts, rated at 5A signal current. It features liquid crystal polymer insulation, bright tin over nickel finish, and brass contact material. Suitable for board mounting with a mating contact pitch of 0.118", it has an operating temperature range from -40 to 105°C.
43045-0818
The Molex 43045-0818 is a rectangular power connector with 8 contacts, made of LCP material. It has an insulation resistance of 1Gohm and can withstand up to 1000VAC. Ideal for board mounting applications in commercial settings, it features male contact gender with tin finish and nickel barrier.
43045-0401
43045-1200
The Molex 43045-1200 is a rectangular power connector with 12 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and bright tin finish contacts.
43045-0618
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
43045-2412
The Molex 43045-2412 is a rectangular power connector with 24 contacts, featuring a mating contact pitch of 0.118" and insulation resistance of 1G ohm. It has a body length of 1.561", suitable for board mounting applications with a dielectric voltage rating of 1500VAC. This durable connector, made from LCP material, operates b/w -40°C to +105°C and is ideal for commercial use cases requiring reliable power connections.
43045-0619
The Molex 43045-0619 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temperature range from -40 to 105°C. It is used in board mounting applications for commercial reliability, featuring male contact gender and surface mount termination.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved