Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 43045-0806 is a rectangular power connector with 8 contacts, LCP insulator, and tin finish. It operates b/w -40 to 105°C, suitable for commercial applications. With a male contact gender and right-angle mounting style, it offers high insulation resistance of 1Gohm.
Median Price
$2.460
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Arrow
1+ parts
$3.379
100+ parts
$2.907
1k+ parts
$2.370
10k+ parts
-
Mouser Electronics
$4.240
$2.930
$2.540
Element14
$4.367
$3.240
Newark
$4.460
$3.210
$2.870
Powell Electronics
$2.470
$1.960
PEI Genesis
Chip1Stop
$2.090
$1.710
Verical
$2.114
Farnell
$1.800
Master Electronics
$1.970
Heilind Electronics
$2.205
DigiKey
NEP Electronics
TTI
$2.190
$2.150
Interstate Connecting
$2.273
Digiode
$1.881
DF Sales Co.
$2.000
Component Electronics Inc.
$2.310
$1.730
$1.500
Nova Conductors
$2.511
Rapid Electronics
$2,836.541
IBS Electronics
$3.000
VNN
ACDS - Activité Composants Distribution Service
Vyrian
SPM Sales
Sensible Micro Corp
R&J Components
Vicor Industries, Inc.
Contempo Components LLC
Bristol Electronics
Andel Nordic
$1.637
$1.571
Corphita
$1.782
Eastek
$2.248
Argo Parts USA
Netroflash
Semicontronic
$2.980
$2.906
$2.891
Continental Prestige Electronics
$3.350
$2.340
Aztec Data Supply Inc.
$7.389
Assy Fe
Perfect Parts
Authorized Procurement Solutions
The compact body length makes this power connector suitable for applications with limited space constraints.
With high insulation resistance, this power connector ensures reliable and safe operation in various environments.
The slim body width allows for efficient use of board space and easy integration into electronic devices.
The tin and nickel finish on the termination contacts provides excellent conductivity and corrosion resistance, ensuring long-lasting performance.
The optimal body depth offers stability and secure connection for the power connector.
The LCP insulator material offers high mechanical strength and thermal stability, making it ideal for demanding applications.
The dual-row configuration allows for increased contact density, enabling higher power transmission capabilities.
The specific board mounting option ensures easy and secure installation on PCBs within the specified hole diameter range.
The high maximum operating temperature tolerance makes this power connector suitable for use in various industrial settings.
The low minimum operating temperature range allows for reliable performance even in extreme cold conditions.
The thick plating thickness provides enhanced durability and resistance to wear, extending the lifespan of the power connector.
The rectangular shape of this connector offers a standardized design for compatibility with a wide range of devices and applications.
The UL 94V-0 flammability rating ensures that this power connector meets stringent safety standards for fire resistance.
The high rated current capacity allows for efficient power transmission without risk of overheating or electrical damage.
The black insulator color provides a sleek and professional appearance for the power connector.
Compliant with UL standards ensures the quality and reliability of this power connector.
The ample number of contacts provides versatility for various power and signal connections within a single connector.
With one connector in the package, this product offers a single-point connection solution for simplified installations.
The specific contact arrangement ensures consistent and reliable electrical connections for efficient power transmission.
The board mounting type offers secure attachment and stability for the power connector on PCBs.
The durable shell material provides enhanced strength and protection for the power connector.
The precise terminal pitch facilitates easy and accurate soldering or connection to the PCB.
The surface mount termination type allows for straightforward and efficient assembly onto the PCB.
The male contact gender is compatible with various female connectors, providing versatile connectivity options.
The low contact resistance ensures minimal power loss and efficient signal transmission for optimal performance.
The receptacle style of the body or shell allows for easy insertion and removal of the connector for convenient use.
The right-angle mounting style offers flexibility in positioning the power connector for space-saving and versatile installations.
The square pin socket contact style ensures secure and reliable connections for smooth power delivery.
The specified maximum insertion force simplifies the installation process and ensures a snug and secure fit of the power connector.
The locking feature in the mounting option provides added security and prevents accidental disconnection of the power connector.
The commercial reliability rating indicates that this power connector is suitable for general industrial and commercial applications.
Power Connectors 43045-0806 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
43045-0806 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices 13/Apr/2015
PCN Assembly/Origin - Mult Devs Tool Duplication 05/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Laube Technology
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
39-29-6068
Molex
The Molex 39-29-6068 is a rectangular power connector with 6 contacts, made of brass and polyamide66. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105°C, and insulation resistance of 1Gohm. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
6326G1
Anderson Power Products
6326G1 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with 2 contacts, UL 94V-0 rated. It features HERMAPHRODITIC contact gender and supports CRIMP AND SOLDER termination. Ideal for cable mounting applications in power systems requiring reliable connectivity.
39-30-1180
The Molex 39-30-1180 is a rectangular power connector with a mating contact pitch of 0.165 inches and a body length of 1.535 inches. It has an insulation resistance of 1000000000 ohms and is commonly used in power applications requiring a durable and reliable connection.
39-01-2225
Molex 39-01-2225 is a rectangular power connector with 22 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a body length of 1.866", width of 0.46", and depth of 0.77". Ideal for cable mounting applications requiring high insulation resistance and UL94V-0 flammability rating.
1-770974-1
TE Connectivity 1-770974-1 Power Connector with Matte Tin finish, rated 600V and 9.5A signal current. Ideal for board mounting applications with POLYAMIDE insulator material, UL94V-0 flammability rating, and operating temperature range of -55 to 105°C.
1954289-1
TE Connectivity 1954289-1 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.
39-30-0200
Molex 39-30-0200 is a rectangular power connector with 20 contacts, made of brass and polyamide66. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
6643220-1
TE Connectivity's 6643220-1 is a rectangular power connector with stamped contact design. It has a rated current of 35A, operates b/w -40 to 105°C, and features compliant boardlock mounting. Ideal for commercial applications requiring reliable female connectors with press fit termination in a right angle receptacle design.
SS-51000-004
Bel Fuse
RECTANGULAR POWER CONNECTOR;
43045-2000
The Molex 43045-2000 is a rectangular power connector with 20 contacts, rated at 5A signal current. It features a body length of 1.325", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
1586037-6
TE Connectivity's 1586037-6 is a rectangular power connector with 0.165" contact pitch, suitable for board mounting. With insulation resistance of 1G ohm, it operates b/w -40 to 105°C and can handle up to 9A signal current. Ideal for commercial applications requiring durable connectors with male contacts.
87427-1202
The Molex 87427-1202 is a rectangular power connector with 12 contacts, offering high insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. With a temperature range from -40 to 105°C, it is ideal for board mounting applications requiring durable connections in commercial settings.
556879-6
TE Connectivity's 556879-6 is a rectangular power connector with 6 contacts, rated at 600V and 35A. Made of polycarbonate, it offers high insulation resistance of 5G ohm. Ideal for commercial applications, this connector has a durability of 100 cycles and operates in temperatures ranging from 0 to 105°C.
2-1445057-2
TE Connectivity's 2-1445057-2 is a RECTANGULAR POWER CONNECTOR with 0.118" Mating Contact Pitch, rated for 250V and 5A signal current. Ideal for board mounting applications, it features POLYAMIDE insulation, -40 to 105°C operating temperature range, and UL94V-0 flammability rating.
91999-1249
The Molex 91999-1249 is a rectangular power connector with insulator material POLYAMIDE. It has 3 contacts, male gender, and blade pin-skt contact style. Suitable for board mounting with solder termination, it operates b/w -20 to 120°C and offers high insulation resistance of 10^7 ohm.
43020-0401
The Molex 43020-0401 is a rectangular power connector with 4 contacts, made of nylon insulator material. It has a temperature range from -40 to 105°C and UL flammability rating of 94V-0. Ideal for commercial applications, it features crimp termination and straight mounting with locking latch option.
43640-0800
The Molex 43640-0800 is a rectangular power connector with 8 contacts, rated for 5A signal current. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications, it offers durability up to 30 cycles with UL flammability rating of 94V-0.
503148-1090
503148-1090 by Molex is a rectangular power connector with 10 contacts, 0.059" mating pitch, and 500M ohm insulation resistance. Ideal for board mounting applications in commercial settings, it features a right angle mounting style and tin termination finish. Operating temperature ranges from -40 to 105°C.
43045-0818
The Molex 43045-0818 is a rectangular power connector with 8 contacts, made of LCP material. It has an insulation resistance of 1Gohm and can withstand up to 1000VAC. Ideal for board mounting applications in commercial settings, it features male contact gender with tin finish and nickel barrier.
2029058-5
TE Connectivity 2029058-5 is a rectangular power connector with 5 contacts, rated at 9A. It features POLYAMIDE insulator material and solder termination type. Ideal for board mounting applications, with dimensions of 0.874" x 0.213" x 0.504".
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43045-0612
The Molex 43045-0612 is a rectangular power connector with 6 contacts, rated for 5A signal current. Featuring bright tin over nickel termination finish, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications, this durable connector with LCP insulator is UL94V-0 compliant.
43045-0400
The Molex 43045-0400 is a rectangular power connector with 4 contacts, featuring bright tin termination finish and glass-filled liquid crystal polymer insulator. It has a temperature range of -40 to 105°C, UL94V-0 flammability rating, and male contact gender. Ideal for board mounting applications requiring durability and reliability in commercial settings.
43045-0600
The Molex 43045-0600 is a rectangular power connector with 6 contacts, featuring bright tin over nickel termination finish. It has a body length of 0.518", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
43045-0412
The Molex 43045-0412 is a rectangular power connector with 4 contacts, featuring tin termination finish and brass contact material. With insulation resistance of 1G ohm, it operates b/w -40 to 105°C. Ideal for board mounting applications, this connector has a durability of 30 cycles and meets CSA, TUV, UL standards.
43045-0800
Molex 43045-0800 is a rectangular power connector with 8 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with bright tin finish and LCP insulator material.
43045-0812
The Molex 43045-0812 is a rectangular power connector with 8 contacts, featuring bright tin over nickel termination finish. With a mating contact pitch of 0.118", it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings, this connector has a durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
43045-1012
The Molex 43045-1012 is a rectangular power connector with 10 contacts, rated for 5A signal current. It features LCP insulator material, brass contact material, and tin finish. Ideal for board mounting applications in commercial settings with operating temperatures from -40 to 105°C.
43045-0418
Molex 43045-0418 is a rectangular power connector with 4 contacts, LCP insulator, and brass contact material. It has a dielectric voltage of 1000VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability up to 30 cycles.
43045-0212
The Molex 43045-0212 is a rectangular power connector with 2 rows, rated at 5A signal current. Featuring liquid crystal polymer insulator and bright tin over nickel finish, it offers high durability with 30 cycles. Ideal for board mounting applications in commercial settings, this connector has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C.
43045-0200
Molex 43045-0200 is a rectangular power connector with LCP insulator, brass contacts, and bright tin finish. It has 2 rows, rated for 5A signal current, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
43045-1000
The Molex 43045-1000 is a rectangular power connector with 10 contacts, featuring bright tin termination finish and LCP insulator material. It has a mating contact pitch of 0.118", withstands up to 1500VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
43045-0414
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
43045-1018
Molex 43045-1018 is a rectangular power connector with 10 contacts, made of brass and LCP insulator. It has an insulation resistance of 1Gohm, withstands up to 1000VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
43045-1212
Molex 43045-1212 is a rectangular power connector with 12 contacts, rated at 5A signal current. It features liquid crystal polymer insulation, bright tin over nickel finish, and brass contact material. Suitable for board mounting with a mating contact pitch of 0.118", it has an operating temperature range from -40 to 105°C.
43045-0401
43045-1200
The Molex 43045-1200 is a rectangular power connector with 12 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and bright tin finish contacts.
43045-0618
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
43045-2412
The Molex 43045-2412 is a rectangular power connector with 24 contacts, featuring a mating contact pitch of 0.118" and insulation resistance of 1G ohm. It has a body length of 1.561", suitable for board mounting applications with a dielectric voltage rating of 1500VAC. This durable connector, made from LCP material, operates b/w -40°C to +105°C and is ideal for commercial use cases requiring reliable power connections.
43045-0619
The Molex 43045-0619 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temperature range from -40 to 105°C. It is used in board mounting applications for commercial reliability, featuring male contact gender and surface mount termination.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved