Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; IEC Conformity: NO; DIN Conformance: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Corphita
Power Connectors 353170430 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Contact Gender:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
353170430 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Electronic Transistors
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
43650-0316
Molex
The Molex 43650-0316 power connector features a body length of 0.498", insulation resistance of 1G ohm, and matte tin termination finish. Ideal for board mounting with a temperature range from -40 to 105 °C, it has a contact arrangement of S0P3 and durability of 30 cycles.
39-28-9108
The Molex 39-28-9108 is a rectangular power connector with 10 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. With a temperature range from -40 to 105°C, it's ideal for commercial applications requiring durability and reliability. The connector uses solder termination and has a contact material of brass for male gender contacts.
76829-0004
Molex 76829-0004 is a rectangular power connector with 4 contacts, featuring liquid crystal polymer insulator and matte tin finish. Withstanding voltage of 2200VAC, it's ideal for board mounting applications in commercial settings with operating temperatures ranging from -40 to 105°C.
43640-1100
The Molex 43640-1100 is a rectangular power connector with 11 contacts, rated at 5A signal current. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for cable and panel mounting applications, this connector offers durability of up to 30 cycles.
350209-1
TE Connectivity
TE Connectivity's 350209-1 is a rectangular power connector with 0.2" mating contact pitch, suitable for board mounting. It features a 12A signal current rating, POLYAMIDE insulator material, and operates b/w -55 to 105°C. Ideal for commercial applications requiring durable power connections.
1376389-1
TE Connectivity's 1376389-1 is a rectangular power connector with insulator material GLASS FILLED POLYAMIDE66. Featuring a rated current of 10A, it has an insulation resistance of 500MΩ and operates b/w -30 to 105°C. Ideal for cable mounting applications, this female connector offers durability with 25 cycles.
43045-1606
Molex 43045-1606 is a rectangular power connector with 16 contacts, rated at 2.5A signal current. It features LCP insulator, brass contacts, and bright tin finish. Ideal for board mounting applications requiring high insulation resistance of 1Gohm and operating temperatures from -40 to 105°C.
43879-0032
Molex 43879-0032 is a rectangular power connector with 24 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.
44764-1001
Molex 44764-1001 is a rectangular power connector with 10 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1400VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability certifications from CSA, TUV, and UL.
1-316132-5
TE Connectivity 1-316132-5 is a RECTANGULAR POWER CONNECTOR with GLASS FILLED POLYESTER insulator. It has 5 contacts, rated for 15A current, and operates b/w -55 to 105°C. Ideal for board mounting applications with SOLDER termination clips.
43640-0401
The Molex 43640-0401 is a rectangular power connector with 4 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for panel mounting applications requiring durable connections in commercial settings.
IPBD-02-D-K
Samtec
Samtec's IPBD-02-D-K is a rectangular power connector with 4 contacts, made of POLYAMIDE. Measuring 0.37" x 0.478" x 0.773", it has UL 94V-2 flammability rating and female SQ PIN-SKT contact style. Ideal for cable mounting applications requiring reliable wire termination.
2-917807-3
TE Connectivity 2-917807-3 is a RECTANGULAR POWER CONNECTOR with 6 contacts, GLASS FILLED POLYESTER insulator, and CRIMP termination. Operating from -55 to 105 °C, it has an Insulation Resistance of 1 Gohm. Used in commercial applications for power connections with UL94V-0 flammability rating.
DF22L-2P-7.92DSA(05)
Hirose Electric
DF22L-2P-7.92DSA(05) by Hirose Electric is a power connector with 2 contacts, Tin/Copper finish, and GLASS FILLED POLYAMIDE insulator. It has a temperature range of -35 to 85°C and UL94V-0 flammability rating. Ideal for board mounting applications requiring male blade pin-skt connectors.
5223955-2
TE Connectivity 5223955-2 is a rectangular power connector with 4 contacts, rated at 48V and 10A. It features polyethylene insulator material, press-fit termination type, and operates in temperatures from -55 to 125°C. Ideal for board mounting applications requiring reliable commercial-grade power connections.
50-29-1758
Molex 50-29-1758 is a rectangular power connector with 0.63"x.2"x.78" dimensions, POLYAMIDE insulator, and 4 contacts for panel mounting. It features UL94V-2 flammability rating and is ideal for commercial applications requiring reliable female crimp connectors with locking mounting option.
39-29-1107
Molex 39-29-1107 is a rectangular power connector with 10 contacts, made of brass and polyamide66. It has a body length of 1.268", width of 0.393", and depth of 0.764". Suitable for board mounting, it operates b/w -40°C to 105°C, with matte tin over nickel termination finish.
2018460040
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: COPPER ALLOY; Mating Contact Finish: NOT SPECIFIED;
39-28-1063
Molex 39-28-1063 is a rectangular power connector with 6 contacts, TIN COPPER finish, and POLYAMIDE66 insulator. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105 °C, and durability of 30 cycles. Ideal for board mounting applications in commercial settings due to its reliability and UL94V-2 flammability rating.
34566-0803
Molex 34566-0803 is a RECTANGULAR POWER CONNECTOR with 80 contacts, ideal for BOARD mounting. Made of GLASS FILLED SYNDIOTACTIC POLYSTYRENE, it features FEMALE contacts and SOLDER termination. Commonly used in power applications requiring high contact density.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved